金属热防护系统边缘热短路研究

研究了金属热防护系统(TPS)的缝隙辐射及支架两大热短路问题。通过数值计算分析了缝隙宽度和缝隙辐射率对热短路的影响,完成了整体样件以及阵列组合件的稳态传热实验测试,定量地研究了热短路的影响情况。实验结果显示:支架处热短路现象明显,实验中支架引发的热短路温差高达50K;在773K以下,缝隙传热引发的温升随着缝隙宽度的增加而线性增加;在773K以上,辐射热传导在缝隙宽度超过3mm时即成为内部传热的主导机制,这时缝隙传热引发的温升不再随宽度增加而线性递增。所提供的数值分析和实验方法可为金属热防护系统的分析与设计提供重要的参考价值。     

陶瓷热障涂层的隔热效果研究

通过理论公式推导和试验测量,得出 :热障涂层的隔热效果与环境温差成正比,但同等环境温差下涂层在更高的温度工作时,由于涂层材料导热系数的增大,其隔热效果减小。涂层厚度与隔热效果在实际涂层应用的厚度范围内也接近线性关系。随着发动机叶片冷却气流换热系数增大,热障涂层的隔热效果也越大,但两者并不是线性关系。涂层隔热效果随导热系数的减小而增大,并且在低导热系数区,热障涂层隔热效果对导热系数的变化更敏感。随着涂层的厚度增大,导热系数的改变所具有的增加涂层隔热效果的作用越大;但涂层越厚,单位厚度涂层导热系数改变所取得的隔热效果越低     

A two-step robust adaptive filtering algorithm for GNSS kinematic precise point positioning

In kinematic navigation and positioning, abnormal observations and kinematic model disturbances are one of the key factors affecting the stability and reliability of positioning performance. Generally, robust adaptive filtering algorithm is used to reduce the influence of them on positioning results. However, it is difficult to accurately identify and separate the influence of abnormal observations and kinematic model disturbances on positioning results, especially in the application of kinematic Precise Point Positioning (PPP). This has always been a key factor limiting the performance of conventional robust adaptive filtering algorithms. To address this problem, this paper proposes a two-step robust adaptive filtering algorithm, which includes two filtering steps: without considering the kinematic model information, the first step of filtering only detects the abnormal observations. Based on the filtering results of the first step, the second step makes further detection on the kinematic model disturbances and conducts adaptive processing. Theoretical analysis and experiment results indicate that the two-step robust adaptive filtering algorithm can further enhance the robustness of the filtering against the influence of abnormal observations and kinematic model disturbances on the positioning results. Ultimately, improvement of the stability and reliability of kinematic PPP is significant.     

小推力高室压NTO/MMH火箭发动机实验系统管路流阻特性实验

为研究小推力高室压NTO/MMH(四氧化二氮/甲基肼)火箭发动机实验系统管路流阻特性,对管路流阻理论、冷流实验及点火实验进行对比分析研究.通过管路介质流动能量损失计算,建立NTO/MMH管路流阻特性理论模型.开展无水乙醇冷流实验及NTO/MMH小推力高室压火箭发动机点火实验,以最小二乘法确定流阻特性实验拟合公式.与冷流实验结果相比,无水乙醇流量分别为0.10~0.40kg/s,0.09~0.36kg/s时,NTO/MMH管路理论流阻平均误差分别为5.42%,3.67%;与点火实验结果相比,真实推进剂流量分别为0.39~0.47kg/s,0.26~0.31kg/s时,NTO/MMH管路理论流阻平均误差分别为2.44%,2.47%,基于冷流实验预测的流阻平均误差分别为5.74%,3.46%,NTO流量为0.47~0.51kg/s(不含0.47kg/s)时,管路理论与冷流实验预测的流阻平均误差分别为16.56%,9.73%.实验与分析结果可应用于小推力高室压NTO/MMH发动机点火实验,并为实验系统设计提供必要支持.      

直径比对冲击气膜组合冷却流动与换热的影响

 通过数值模拟,研究了涡轮叶片弦中区所采用的新型双层腔冷却结构的冷却特性,系统分析了冲击气膜组合冷却的流动与换热特性,讨论了冷气进口雷诺数Re、吹风比M以及气膜孔与冲击孔的直径比D/d对组合冷却效果的影响。计算参数范围是：冷气进口雷诺数Re＝2 000～5 000,吹风比M＝0.6～2.0。计算结果表明, 冷气进口Re,M以及D/d对双层腔结构冷却效果的影响非常明显,在计算范围内:（1）Re和M越高,冷却效果越好;（2）当冲击孔直径一定时,增加气膜孔的直径,冷却效果会随之增加;（3）当冲击孔直径一定时,增加气膜孔的直径,流阻系数会随之减小。     

固体火箭发动机对交变环境温度瞬态响应的研究

在阐述了环境温度方程、传热方程和粘弹性本构关系的基础上,用有限元法求解了固体火箭发动机对交变环境温度的温度和应力响应,给出了发动机中的温度分布和应力分布,得出了发动机中危险部位和危险季节的结论。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

温度梯度环境中潜艇尾流热特征的试验研究

改进了用于实验室热尾流测量的温度测量系统,提高了系统的集成度和抗干扰能力。在水槽中实验研究了螺旋桨推进潜艇模型在有、无温度分层流体中尾流的热特征,得到两种条件下尾流的温度分布和信号衰减规律,分析了两种尾流信号的形成机理及其影响因素,表明在温度分层环境中＂冷尾流＂信号对探测和识别水下航行的潜艇更为有利,所得结果可为红外反潜和潜艇红外隐身提供更加切合实际的理论支撑。     

用于发动机羽流试验研究的液氦热沉设计

超低温大型卧式热沉采用液氦制冷,将在国内实现热沉表面温度低于10K,主要用于航天发动机羽流效应试验,同时兼顾卫星等热真空试验.热沉主体结构为卧式圆筒型,为减小热损失,液氦热沉去掉了骨架,外部装有液氮热沉,两者采用一体化设计,液氮热沉既做液氦热沉的防辐射屏,又做液氦热沉的支撑.为增大抽速,舱体封头端设计了可拆卸的羽流吸附泵.羽流试验时液氦热沉、羽流吸附泵通液氦制冷,液氮热沉通液氮制冷,各部分热沉单独供液.对此大型热沉进行了方案设计、参数计算,对热沉预冷及稳态工况时的液氮、液氦消耗量进行了估算,分析了羽流试验时热沉抽气速率随试验工质温度的变化关系,得出液氦热沉对氮气的抽气速率可以达到107L/s量级.