双马来酰亚胺改性酚醛型环氧树脂性能研究

采用双马来酰亚胺(BMI)改性酚醛型环氧树脂(F-51)/芳香胺(DAMI)固化体系。采用DSC,TGA和TMA等仪器考察BMI含量对改性体系的固化行为、力学性能及热稳定性的影响,并用扫描电镜(SEM)研究材料断面的形态结构。结果表明,随着体系中BMI比例的增加,体系固化放热峰向高温区移动,总反应热减小,BMI的加入可以提高材料的力学性能和热稳定性,改性后材料断裂面的形态呈现韧性断裂特征。     

利用红外技术进行层板冷却特性实验研究

为了研究层板冷却特性,应用远红外热像测温技术,对一个真实尺寸的层板结构进行了实验.层板的气膜孔、绕流柱及冲击孔直径分别为0.,0.8,0.8 mm,内腔高及总板厚分别为0.8,2.6 mm,孔柱数比为1:4:1.为了准确测量表面温度,采用了高精度热电偶校正法,建立修正关系;为了描述层板综合冷却效率,采用热像数字信号运算法,直接进行数据处理.实验在高温亚声速风洞中进行,实验结果展示了冷却介质注射量对层板冷却特性的影响,证明远红外热像技术用来研究层板冷却特性是一种有效的方法.      

7150铝合金热变形行为及微观组织

采用Gleeble热模拟机进行热压缩实验,研究7150铝合金在变形温度为300~450℃、应变速率为0.01~10s-1条件下的变形行为,采用Zener-Hollomon参数法构建合金高温塑性变形本构方程,并对变形后的微观组织进行分析。研究表明:7150铝合金的流变应力随应变速率增大而增大,随变形温度增大而降低。该合金热压缩变形的流变应力行为可用双曲正弦形式的本构方程描述,其参数A为4.161×1014s-1,α为0.01956 MPa-1,n为5.14336,热变形激活能Q为229.7531k J/mol。随着温度升高和应变速率降低,动态再结晶逐渐取代动态回复成为合金的主要软化机制。     

接触特性对非连续性转子热致振动的影响

针对燃气轮机转子的非连续性结构间存在的接触特性,根据微凸体理论引入接触刚度和接触热阻的等效模型,建立了某型燃气轮机非连续性转子的动力学模型,分析了接触参数对转子稳、瞬态动力学特性的影响,研究了螺栓松动引起的转子热变形及其对转子快速启动过程中振动特性的影响.结果表明:预紧力、接触面的表面粗糙度和螺栓个数对转子临界转速有一定的影响,螺栓松动导致转子在启动过程中瞬态热变形最大达到7μm,过1阶临界转速时引起的转子最大响应幅值增大约30μm.在非连续性转子系统的热致振动特性分析当中,不应忽视接触参数、接触刚度和接触热阻的影响.      

高超声速复杂气动问题数值方法研究进展

高超声速流场具有复杂流动特征,其中真实气体效应、磁流体干扰效应和力热结构耦合效应等对气动力分析产生了重要影响。将流体力学研究扩展到分子动力学、电磁流体力学以及流固耦合等交叉学科领域,这给数值模拟方法带来了巨大挑战。针对高超声速气动力/热分析的热点问题,重点关注高温效应与低密度流动效应、磁流体干扰效应和力热结构耦合效应等,结合算例分析了相应的数值求解技术;在气动热方面主要比较了3类求解方法(纯工程方法、纯数值方法和基于Prandtl边界层理论的方法),并给出了相应算例;对于气动力/热/结构耦合问题,从耦合模型及耦合计算方法两方面开展了分析。最后指出了高超声速复杂气动问题数值求解技术未来需重点关注的几个方面。     

小型无人倾转旋翼机气动与操纵特性试验研究

由于倾转旋翼机飞行模式多,各部件气动干扰复杂且操纵面冗余,特别是倾转过渡模式,短舱带动旋翼系统倾转,结构布局发生改变,从理论上确定气动与操纵特性难度大。为了研究倾转旋翼机的气动与操纵特性,对某小型无人倾转旋翼机展开全尺寸、全模式吹风试验,其中不带动力试验主要用于研究倾转旋翼机在不同迎角、短舱倾角、前飞速度等飞行状态下的气动特性;带动力试验主要用于研究倾转旋翼机不同飞行模式带机翼与不带机翼时,旋翼/机翼/襟副翼相互干扰作用,以及总距、副翼、升降舵的操纵功效。根据试验数据推导出小型无人倾转旋翼机全包线飞行的操纵特性方法,对进一步完善倾转旋翼机设计以及试飞试验的成功提供了参考。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

新型高温/超高温热障涂层及制备技术研究进展

简单介绍了先进航空发动机高温/超高温热障涂层(TBCs)的研究背景、意义和现状;简述了近年来国际上在新一代超高温TBCs方面的研究进展。重点介绍了近年来北京航空航天大学在新型高温/超高温TBCs方面的研究成果,包括新型超高温、高隔热陶瓷隔热层材料,1 150℃以上新型抗高温氧化金属粘结层材料,以及电子束物理气相沉积(EB-PVD)、等离子体激活EB-PVD(PA EB-PVD)和等离子物理气相沉积(PS-PVD)等新型制备工艺。最后对TBCs在未来高性能航空发动机上的应用及发展趋势进行了展望。     

某火力电厂机组控制系统的设计与实现

以某火力发电厂的建设为整体背景,结合电厂设计过程中实际出现的问题,以及以往的设计经验,利用MaxDNA控制系统,展开对于整体火力机组控制系统中的软硬件的设计。通过某火力发电厂实地进行联调联试,确保相应的设备能够正常的工作,以保证机组的正常运行。系统运行情况良好,基本实现工艺设备的控制要求,获得了用户的认可,降低了相关工作的工作强度,取得很好的经济效益。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.