基于粗糙集和神经网络的导弹故障诊断方法

人工神经元网络（ANN）具有本质的非线性特性、并行处理能力以及自组织自学习的能力,但单独使用ANN处理问题时,往往会存在一些缺陷。文章介绍导弹驾驶仪故障智能诊断的一种新方法：首先,利用粗糙集原理约简故障特征属性数据;其次,用带动量项的批处理BP神经网络方法对故障数据进行训练并检验;最后,将故障数据处理后输入神经网络分类器,对故障实施诊断。     

非稳态流体网络方法在发动机空气冷却系统中的应用

将流体网络法与非稳态模拟方法相结合应用到发动机空气冷却系统沿程温度、压力、流量的非稳态特性预测中.本方法将空气系统简化为节点和元件组成的网络,节点和元件处建立守恒方程,针对传统解法的计算稳定性问题引入了压力修正和积分方法相结合的求解方法.程序应用到可参考对照的模型中得到验证.验证后的程序被应用到发动机轴部冷却通道空气系统非稳态特性预测中.      

基于神经网络的民航安检系统风险评价研究

随着民航事业的快速发展,民航安全问题引起了广泛的关注.民航安全检查是民航管理安全重要的组成部分,如何建立一个合理的风险评价模型,指导民航安全检查的管理工作,已成为民航管理者的迫切需求.将BP神经网络模型引入民航安全管理,在分析民航安检系统的基础上,建立了安检系统的风险评价模型.通过实际应用验证了该模型的可行性.     

一种模糊神经网络检测下的入侵容忍系统设计

为了与网络系统中的入侵行为进行抗衡,可以通过安装入侵检测系统来监控系统中的各种网络行为,入侵容忍可以作为入侵检测系统的互补系统与之一起工作.漏报与误报问题是入侵检测系统面临的根本性问题,加入神经网络技术后并不能完全解决此问题.入侵容忍技术的提出很好地平衡了"失误"与"恶意"、"入侵"与"非有意"之间的冲突与矛盾.入侵容忍本身就是一种"模糊"概念,为模糊数学在计算机安全中的应用提供了有力的理论支持.提出了一种基于模糊神经网络的入侵检测系统应用于入侵容忍的设计方案,并将入侵容忍与入侵检测、防火墙结合,作为一个独立于应用的系统进行设计.     

基于Nash-Pareto策略的两种改进算法及其应用

针对多目标、多设计变量的优化问题,提出了两种优化的新算法:一种是将多目标问题转化为单目标时,对目标权重的确定提出了新的途径;另一种是直接对多目标问题进行优化,并对Pareto遗传优化技术作了改进,以得到均匀分布的Pareto最优解集.两种新算法都是建立在Nash的系统分解与Pareto遗传算法的基础上,因此称这类算法为Nash-Pareto策略.借助于这类算法,文中以跨声速压气机双圆弧类叶型的气动优化为例,给出了气动优化的全过程.数值优化的实验表明所给出的改进算法是可行的、有效的.     

基于动态贝叶斯的反舰导弹弹型识别

使用反舰导弹对舰艇进行饱和攻击是当前对舰攻击的主要方式。首先,提出了动态贝叶斯网络(DBN)的理论及算法;其次,根据反舰导弹的高度、速度、过载、机动方式等弹道特性和RCS、雷达频率等导弹自身特性,建立了对反舰导弹进行弹型识别的DBN模型;最后,通过仿真算例验证了DBN模型的有效性,这为实际解决反舰导弹进行弹型识别的问题,提供了一种思路。     

民用飞机静气动弹性载荷计算方法研究

以某大型客机为例,根据气动外形利用有限元软件PANTRAN建立高阶气动面元,利用ZONAIR静气动弹性方法,分析了其弹性载荷,包含气动力系数、过载、迎角,并与刚性载荷进行了对比。此方法合理可靠,可用于民用飞机的弹性载荷设计分析。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于概率统计的DS/FH系统干扰检测算法

基于时频分布的干扰检测算法是DS/FH（Direct Sequence/Frequency Hopping,直接序列扩频/跳频扩频）系统干扰检测的传统手段,针对其运算量大、实时性差,以及无法检测某些特殊干扰信号等问题,提出一种基于概率统计的干扰检测算法.通过统计DS/FH系统频谱图中各频率的幅值出现位置,以DS/FH信号与干扰信号频谱分布规律的差别为判决依据,完成DS/FH系统中干扰信号的检测.分析和仿真结果表明：该检测算法能够有效识别DS/FH系统中的典型干扰信号,与传统基于时频分布的检测算法相比,能够实现某些特殊干扰信号的有效检测;同时,由于该算法不需要进行复杂的时频联合分析,其运算复杂度大大降低,能够实现DS/FH系统干扰信号的快速检测.