介质阻挡放电等离子体的温度测量

在空气介质阻挡放电中,利用氮分子振动谱线和氮分子离子的转动谱线,研究了振动温度和转动温度在两极板间的分布情况。结果表明：越靠近极板振动温度越小,中间振动温度最高;而转动温度在两极板间基本保持不变。     

基于I~2C总线的CPU温度监控系统

随着高性能、高功耗器件在嵌入式领域中广泛应用,温度监控已成为高可靠嵌入式领域研究的热点,采用ADI公司的测温电路ADT7461设计了面向高性能PowerPC处理器的温度监控系统。介绍了ADT7461芯片的功能原理,描述了整个硬件电路的结构。在软件部分阐述了I2C总线协议以及基于I2C总线协议实现的ADT7461寄存器读/写基本操作,针对应用中会面临的实际问题给出了具体解决方法。设计方法对于同类温度监控系统设计有一定的参考意义。     

飞机反区时的操纵策略特性及物理机理研究

针对飞机在低动压飞行(如着舰)时处于阻力曲线反区所采用的Frontside操纵和Backside操纵方式,分别从指令控制、风扰抑制、执行机构影响三种情况对两种操纵策略的性能进行了仿真比较,得出相关结论,并分析了其内在物理原因。研究结果表明,Backside操纵性能优于Frontside操纵,具有响应快、超调小、无初始负调、抗风鲁棒性强,以及俯仰角、迎角和升降舵变化小等特点,但同时速度和推力变化大,且执行机构相位滞后对Backside操纵性能影响较大。     

高精度温度控制方式述评

对高精度温度控制系统中常用的模拟控制方式、数字控制方式和模拟/数字控制方式作了比较,目的在于找到既能满足计量检定恒温装置所需的技术指标、又方便实用的控制方式.     

热管式表面温度计检定装置

叙述一种热管式表面温度计检定装置的原理、结构。该装置可用于航天领域在实验室条件下对表面温度计的检定。     

Tidal associated temperature disturbances observed at the middle atmosphere (30–65 km) by a Rayleigh lidar at 23°S

A lidar has been operated in São José dos Campos, Brazil (23.2°S, 45.8°W) since 1972, mainly dedicated to the study of mesospheric sodium at the 589 nm resonant line. The molecular Rayleigh scattering can also be used provided we limit the height to ∼75 km where the sodium scattering begins. Nevertheless, the weak signal obtained only permits the determination of density and temperature profiles by accumulating a large number of shots giving only nocturnal average profiles. Temporal variations in density and temperature on the scale of hours can however, be obtained by performing a superposed epoch analysis for a given time interval and covering a period of several days. In this way we obtained hourly mean profiles grouped by months, seasons and overall, with data acquired from 1993 to 2004. The difference between the hourly temperatures and the nocturnal means shows for some months, with enough data coverage, downward propagating structures that apparently have tidal origin. The seasonal averages show a recurrent feature with high temperatures before and low temperatures after midnight above 50 km. Some similarity is found with the GSWM model, but the observed temperature amplitudes are twice of that for the model.     

飞行中大气瞬时温度的获取

根据＊＊飞机上，ＣＷ－１００２和Ⅱ－５的试飞结果，对两种产品的性能做了对比分析；对飞行中大气温度的获取方法提出了的新意见。     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

载人航天器空气环境参数控制非定常仿真分析

为支持乘员在轨驻留,载人航天器需通过空气环境控制系统将众多设计参数和空气环境参数控制在指标范围内。文章建立了一种载人航天器空气环境非定常控制仿真分析模型,包括舱体模块、航天员模块、舱压控制模块、温湿度控制模块以及CO2净化模块。利用该模型分析了载人航天器空气环境参数随乘员代谢水平的非定常变化趋势,并评估了控制系统的工作性能。结果表明:乘员代谢水平变化对空气环境参数有显著影响,通过调节控制系统运行参数可将各空气参数控制在有效指标范围内。人区温度与O2分压、CO2分压和人区湿度有密切的影响关系,不可孤立地进行分析。为载人航天器空气环境参数控制系统的设计和流程改进提供了依据。     

基于MATLAB/Simulink的飞机燃油箱内燃油温度仿真计算

燃油温度是飞机燃油箱可燃性评估的关键参数之一。为了研究飞机燃油箱内温度的分布规律及传热模型的正确性,采用MATLAB/Simulink软件平台搭建出了客机的燃油箱热仿真模型。在输入飞行实验所对应的的边界条件后,通过数值模拟获得燃油箱内部各计算节点处的燃油温度。结果表明,在三种不同的航行条件下,燃油箱热模型仿真结果均能较好地与飞行实验结果吻合,能够将计算误差控制在一定范围内。采用该燃油箱热模型进行热仿真数值模拟可以获得较为准确的飞机燃油箱热特性,能够在飞机设计阶段,用于对燃油箱结构以及内热源部件布置的优化。