综合环境试验系统研制中的技术问题

温度、振动、湿度综合环境试验系统是工程研制、鉴定和生产可靠性试验的必备的设备。根据可靠性试验要求，介绍了综合环境试验系统研制过程中所遇到的试验箱高温度变化速率、振动台大台面和大位移、振动和冲击控制算法等技术难点，并给出了解决途径。     

卫星真空热试验中红外加热笼的创新设计

针对某型号卫星加热笼设计中的一些特殊问题,设计了一些特殊的处理方法,包括加热带双面涂黑漆的方法,加热笼结构设计中的一些特殊处理,以及支架控温装置等的设计。试验证明,这些方法在卫星真空热试验过程中取得了好的效果,可以为今后加热笼的设计开阔思路,有利于更好地完成试验任务。     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

浅析飞机烤箱冒烟原因及解决方案

以 B/E 厂家的431系列烤箱为例,分析深航机队中无水型烤箱冒烟的情况,结合一起典型事件通过电路分析确定烤箱冒烟的技术性成因,并提出了相应的解决方案。     

基于流-固耦合方法的涡轮叶片热应力仿真

为真实模拟超高速转子的工作性能,必须对涡轮叶片进行流体-热-结构耦合分析。将有限元软件中提供的流-固耦合仿真技术应用到涡轮叶片瞬态传热计算中,利用ANSYS CFX建立了涡轮叶片与高温燃气的流-固耦合传热模型,该模型既包括了固体与固体之间的接触传热,也包括了流体与固体之间的耦合传热。以某涡轮转子为例进行了流-固-热耦合分析仿真计算,获得叶片的瞬态温度场分布和热应力。在此基础上结合整个涡轮叶片的实际工作状况对其模拟结果进行定性分析,验证其分析方法的可行性,为实际涡轮叶片设计优化提供了理论依据,有助于叶片加工工艺方法的改进,其分析方法对类似问题的处理也很有借鉴意义。     

多种气膜冷却形式下轴对称矢量喷管壁温计算研究

航空发动机矢量喷管的冷却结构设计是研究矢量推进技术应用的关键问题之一。针对某偏转20°轴对称矢量喷管隔热屏采用的十种气膜冷却结构,建立基于壁面传热的热平衡方程,采用牛顿-拉斐尔森迭代法得出十种冷却结构下壁面及隔热屏的温度。其中气膜冷却采用有效温比经验公式计算,燃气辐射采用封闭腔净辐射分析法计算,并把本文计算的壁温与文献结果进行对比分析。结果表明:隔热屏对喷管收敛段有很好的冷却作用,采用气膜冷却可显著降低其温度;相对于受隔热屏保护的收敛段而言,喷管扩张段的受热形势较为严峻,温度更高,其冷却有待加强。     

改性BMI树脂固化过程的温度控制优化

针对以改性双马来酰亚胺树脂(BMI)为基体的树脂膜熔渗(RFI)成型工艺,以三维热传导方程与固化动力学模型为控制方程,采用有限元/有限差分方法对所得方程进行离散求解。为了衡量固化质量,提出了两个新的控制参数,并用于最优固化温度控制工艺的模拟。数值结果表明,构件内部温度与固化度均高于表面,而固化保持温度和起始时间会对构件中温度和固化度的均匀性产生较大影响。数值模拟结果对固化过程的优化设计有重要的指导意义。     

Temperature effects in the ATIC BGO calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had a successful test flight and a science flight in 2000–01 and 2002–03 and an unsuccessful launch in 2005–06 from McMurdo, Antarctica, returning 16 and 19 days of flight data. ATIC is designed to measure the spectra of cosmic rays (protons to iron). The instrument is composed of a Silicon matrix detector followed by a carbon target interleaved with scintillator tracking layers and a segmented BGO calorimeter composed of 320 individual crystals totaling 18 radiation lengths to determine the particle energy. BGO (Bismuth Germanate) is an inorganic scintillation crystal and its light output depends not only on the energy deposited by particles but also on the temperature of the crystal. The temperature of balloon instruments during flight is not constant due to sun angle variations as well as differences in albedo from the ground. The change in output for a given energy deposit in the crystals in response to temperature variations was determined.     

电沉积烧结薄膜高温氧化性能研究

用电沉积烧结方法在１Ｃｒ１８Ｎｉ９Ｔｉ不锈钢表面形成铬、钇氧化物薄膜，通过研究比较不同沉积条件试样氧化层的高温氧化行为，发现１Ｃｒ１８Ｎｉ９Ｔｉ表面经铬、钇氧化物改性后抗高温氧化性能得到提高。     

高温流动系统内置辐射板强化传热的研究

高温气流换热通道中，沿气流方向插入辐射板，可利用板的热辐射增强换热。本文利用辐射与对流联合作用的非耦合模型，进行了数值计算，并在最高气温为９００℃的高温风洞上进行了实验研究。理论与实验结果吻合良好。文中对入口温度、风速及板数等因素的影响作了分析。