一类非线性系统的混沌控制

 描述航天器、陀螺和气浮台等刚体姿态运动的欧拉动力学方程,是一个具有广泛代表意义的三阶非线性方程。当该方程中的参数取不同值时,可得到著名的Lorenz系统、Rssler系统、Newton-Leipnik系统、Chen系统及Lü系统。在不同的外力矩作用下,该动力学系统会呈现出相当复杂的动力学行为。从该系统中,发现了一大类新的混沌吸引子。本文分析了这一类混沌吸引子具有的共同特征,并采用基于输出反馈的PI型控制器将一种新的混沌运动稳定于指定平衡点。仿真结果表明,该控制器能够有效地抑制混沌,能将系统稳定于任意指定的不稳定平衡点。     

基于运动形态学的掠地飞行器视频检测方法

 结合数学形态学、视频图像运动分析以及数学统计分析方法,提出了一种用于空中预警控制系统(AWACS)的小型掠地飞行器运动形态学视频检测方法。该方法首先应用形态学tophat滤波提取出视频图像中的可疑目标(SO),并求取SO的运动参数,利用真实目标和类目标干扰的不同运动特性,应用数学统计的方法对各运动参数进行分析以剔除部分类目标干扰,从而获得潜在目标(PT)的灰度分布和运动参数。在应用形态学tophat滤波器进行可疑目标提取中,一种新的金字塔型结构元的引入有效减少了虚警数量。外场试验表明,该检测方法能够有效抑制航拍掠地飞行器视频图像中的地物干扰,降低虚警目标的数量。     

基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

空间飞行器姿态的有限时间跟踪控制方法

 针对带不确定项的空间飞行器系统姿态跟踪控制问题,给出一种基于有限时间控制技术的滑模控制方法。使得姿态跟踪误差系统不仅可在有限时间内从任意状态到达滑动面,而且也可在有限时间内沿滑动面收敛到零,并给出了严格的数学证明。为了避免控制律中的颤动问题,一种新的饱和函数被用来代替控制律中符号函数。数值仿真实验说明了该方法的有效性。     

机电作动系统发展

 机电作动系统是通过控制电动机或电器的运行直接或间接地控制负载的运动,实现控制目标的位置伺服控制的一类系统的总称。针对飞行器用机电作动系统,概述了其应用概况、结构的演化过程、关键技术的发展过程,并就机电作动系统的发展动态做了介绍。在此基础上,提出了飞行器用机电作动系统的研究和发展的一些建议。     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制,在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理,阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试,表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明,微致动器作动可以影响翼型表面的压强分布,从而可用于增升等控制目的。