数值模拟方法对NASA CRM模型阻力预测的影响

在复杂工程外形的数值模拟中，网格类型、规模和分布、湍流模型、数值格式等都会不同程度影响模拟结果。如何评估这些模拟方法对模拟结果的影响，并识别对模拟结果影响较显著的因素，对于CFD的发展方向有积极的借鉴指导意义。为了综合研究不同因素对商用运输机外形阻力预测的影响，以AIAA第六届阻力预测会议外形NASA CRM为研究对象，同时考虑了网格、湍流模型、无黏通量格式和体心梯度求解方法等因素对阻力预测的影响。分析中采用枚举法和正交试验设计两种方法，并使用了基于聚类分析的定性敏感性分析方法和基于Mckay主影响分析的定量方法，识别出对阻力预测影响较大的因素，这为数值模拟方法的发展指明了方向。     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

Effects of Mach numbers on Magnus induced surface pressure

Experimental and numerical methods were used to investigate the Magnus phenomena over a spinning projectile. The pressure force acting on the surface of a spinning projectile was measured for various cases by employing a relatively novel experimental technique. A set of miniature pressure sensors along with a data acquisition board, battery and storage memory were placed inside a spinning model and the surface pressure were obtained through a remotely controlled system. Circumferential pressures of the model for both rotational and static conditions were obtained at two different free stream Mach numbers of 0.4 and 0.8 and at different angles of attack. The results showed the ability of this new test method to measure the very small Magnus force via surface pressures over the projectile. The results provide a deep insight into the flow structure and illustrate changes in the cross-flow separation locations as a result of rotation. Similar results were obtained by the numerical simulations and were compared with the experimental data.     

某靶用型无人机发动机空中停车故障分析

针对某新型靶机出现的发动机空中停车故障,对测控站记录数据进行分析,发现了转速采集系统和ECU控制系统存在的缺陷,并提出了解决措施。     

基于响应面法的齿轮容差设计方法研究

随着附件传动系统不断向高速、重载方向发展,齿面接触可靠性问题越来越受关注.为提高齿轮可靠性,分析了齿轮传动系统常见误差类型及影响,开展了齿轮容差设计初步探讨.根据齿轮制造、加工及系统动态误差的产生原理和作用方式,基于齿轮接触应力仿真结果,确定了影响齿轮接触应力随机性的5种主要误差形式及其特征量分布规律,提出了基于响应面法的齿轮容差设计方法,给出了齿轮系统公差设计的改进方向:在进行齿轮公差设计时,重点控制H、V方向的轴向平行度公差.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

基于类脑模型与深度神经网络的目标检测与跟踪技术研究

目标检测与跟踪技术广泛应用于交通、医疗、安保和航天等领域.目前,目标检测与跟踪技术面临目标微弱、背景复杂、目标被遮挡等挑战.同时,随着脑科学研究的不断深入,人们对人脑视觉系统的理解逐渐透彻,利用类脑计算解决复杂背景下高精度目标检测与跟踪问题成为相关领域的重要研究方向.本文结合神经工程导向的类脑模型和计算机工程导向的深度神经网络(Deep Neural Networks, DNNs),提出多种基于类脑模型与深度神经网络的目标检测与跟踪算法,包括：基于演算侧抑制的目标检测算法,基于结构 对比度(Structure Contrast, SC)视觉注意模型的弱小目标检测算法和基于记忆机制与分层卷积特征的目标跟踪算法.实验结果表明,将类脑模型和深度神经网络应用于目标检测和跟踪领域,有利于实现复杂条件下的高精度目标检测和鲁棒性目标跟踪.     

高速旋转冲压增程弹用进气道复杂流场数值模拟

采用块结构网格与二阶精度流场分区求解技术,对高速旋转、含侧向支柱冲压增程弹丸进气道内外复杂流场进行了数值模拟,得到了高速旋转工况下对应于不同来流马赫数和攻角,以及临界工况时超音速进气道内外流场复杂的波系结构。在旋转工况下,进气道流场结构与不旋转时相似,但旋转速度以及攻角的存在对冲压发动机进气道的总体性能产生了负面影响,进气道总压恢复系数和动能系数均有所降低,而流场畸变指数则显著增大;冲压发动机进气道在较低马赫数工作时的综合性能优于在较高马赫数工作时的综合性能。     

点目标假设下的二维精度体系研究

点目标假设下,在二维圆概率偏差线性公式的基础上,给出了基于纵横向均方根误差分段的精确公式。同时应用概率论正态分布理论,对二维情况下均方根误差、圆概率偏差和概率偏差的相互关系进行了研究,通过理论推导和数值计算给出了二维精度指标相互转换的拟合公式,完善了满足工程应用的二维精度体系。研究结果可在精度指标的论证、设计和考核中使用。     

通信拓扑切换下的多飞行器协同拦截方法

针对通信拓扑切换条件下的多飞行器协同拦截问题,提出了一种基于扩张状态观测器的协同制导方法。建立协同制导设计模型,将协同拦截问题转换为视线稳定条件下的剩余飞行时间调节问题。为解决机动目标状态不确定的问题,将目标的状态视作扰动,设计扩张状态观测器来估计机动目标的状态,并在制导律中对目标的机动进行补偿。利用有限时间一致性理论进行一致性控制协议的设计,实现各飞行器剩余飞行时间的有限时间一致,并利用Lyapunov稳定性理论分析通信拓扑切换情况下闭环系统的有限时间稳定性,给出了系统一致收敛时间。仿真结果表明,在通信拓扑变换的情况下,设计的观测器能够有效估计目标状态,且协同制导律能够满足对剩余飞行时间的控制要求,进而实现协同拦截。