Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

某靶用型无人机发动机空中停车故障分析

针对某新型靶机出现的发动机空中停车故障,对测控站记录数据进行分析,发现了转速采集系统和ECU控制系统存在的缺陷,并提出了解决措施。     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

基于局部三角变换的OFDM系统

正交频分复用(OFDM)调制技术由于具有良好的抗多径干扰能力和高效的频谱利用率,在许多数字传输系统中被广泛应用,成为当今卫星通信研究的热点。本文提出了基于局部三角变换（LTT）的OFDM系统模型,该系统带外频率谱密度下降快,并能保持相邻的OFDM符号的正交性。给出了用离散余弦变换（DCT）实现的快速算法及复杂度,并考查了最优基的选取。仿真和分析结果表明：该系统误码率比基于快速傅里叶变换（FFT）的系统更小,能更好地适应高速传输带来的大多普勒频移,更有效地利用带宽,为接收端对高速数据的解调提供很好的保证。     

基于目标距离的末制导雷达最优搜索图模型

深入研究了反舰导弹末制导雷达目标捕捉模型,以末制导雷达第一方位搜索周期捕捉概率和全程搜索捕捉概率为约束条件,建立了以末制导雷达第一方位搜索周期扫描面积为目标函数的末制导雷达最优搜索图求取模型,解决了基于目标距离的末制导雷达最优搜索图参数求取问题,并利用多项式拟合,得到了最优搜索图参数工程实现方法,该方法易编程、计算量小、占用内存少,是一种简单、实用的中远程反舰导弹末制导雷达最优搜索图参数实现方法。     

空间机器人捕获漂浮目标的抓取控制

提出了动态抓取域用于空间机器人捕获漂浮目标的抓取控制。空间机器人捕获漂浮目标时,由于机械臂与基体的动力学耦合、抓取时的碰撞激振等非线性特性使得抓取控制变得复杂而重要。首先建立了空间机器人及漂浮目标的动力学模型,而后引入了末端装置抓取目标时的碰撞模型,并提出了"动态抓取域"用于机械臂抓取目标时的控制,同时应用关节主动阻尼控制,以减小抓取碰撞激振对空间机器人冲击的影响。结果表明:在相同抓取时间下,加速抓取明显优于匀速抓取,碰撞力振幅减小至匀速抓取时的20%,对空间机器人的激振冲击明显消除,仅在抓取结束前有小幅激振。这对空间机器人的抓取控制有着重要的理论价值及工程实际意义。     

一种改进的双重频退速度模糊方法

本文分析了双重复频率退模糊方法的局限性和误差成因,提出了一种统计求解方法进行速度退模糊.此方法同传统方法的差异在于,其首先对Nyquist数进行估计,再进行退模糊处理.理想实验和在中频相参多普勒天气雷达上的实际结果分析均表明,改进的方法具有更好的解速度模糊性能,且具有较高的实效性.