Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

超燃冲压发动机燃烧室出口温度场分布CARS测量

针对超燃冲压发动机研究中对燃烧室出口温度场的测量需求以及暂冲式超燃冲压发动机燃烧台架试验中的应用难点,开发了适用于瞬态燃烧场温度测量的单脉冲相干反斯托克斯拉曼反射（CARS）系统及CARS光谱计算和温度反演软件CARSCF。采用USED相位匹配方式来降低湍流影响,结合多尺度小波分析方法来实现CARS光谱降噪处理,提高信噪比。在暂冲式脉冲燃烧风洞上开展了来流马赫数2.6条件下超燃冲压发动机燃烧室出口温度测量试验,获取了超声速来流（冷态）建立、H₂点火加热空气、建立超声速燃烧流场直至试验结束过程中的燃烧室出口温度,以及煤油/空气燃烧时燃烧室出口温度场分布。结果显示,超声速冷流时温度处于低温（约205K）状态,随着H₂点火加热来流空气,来流温度上升至853K;随着煤油/Air点火,温度急剧上升,稳定燃烧状态下燃烧流场温度为1970K±144K。燃烧室出口截面温度场分布测量结果显示,高温区位于燃烧室出口截面上侧区域,而燃烧室出口截面上中间区域的温度低于上下两侧。燃烧室出口温度分布CARS测量结果与火焰自发光成像结果一致,表明单脉冲CARS技术用于瞬态燃烧流场温度测量的可行性。     

双燃式冲压发动机中超燃燃烧室冷态流场数值模拟

采用Ｍａｃ Ｃｏｒｍ ａｃｋ 矢通分裂格式, 求解雷诺平均的Ｎ－Ｓ方程组, 采用Ｂａｌｄｗ ｉｎ－Ｌｏ－ｍ ａｘ 代数湍流模型和混合长度模型, 模拟超燃燃烧室内两股平行超声速来流的冷态流场, 取得了与试验相一致的结果, 计算表明回流区和射流流动参数对超燃燃烧室流场内波系的变化有着较大的影响。     

用粘性涡方法计算伞状物绕流

文章用粘性涡方法计算了二维伞状物绕流问题。首先阐述了涡方法的基本理论 ,包括涡元的对流、粘性扩散、物面涡元的脱落、物体所受气动力计算等 ,然后介绍了使用涡方法的一般步骤。最后将完全充满的伞衣简化为二维圆弧壳 ,计算了伞衣内外压力分布、阻力系数及升力系数     

压缩性对细长体涡流非对称发展的影响

通过数值方法对大迎角细长体湍流流场的模拟,探讨压缩性对细长体非对称绕流发展的影响。结果表明细长体顶端的极小扰动诱发显著的非对称绕流,非对称的涡系结构沿轴向是逐步演化的;在亚临界横流马赫数区间,马赫数越高非对称越显著;在超临界横流马赫数区间,细长体两侧出现横流激波,非对称的发展被抑制,马赫数越高非对称越弱。     

受平行壁限制的燃油喷雾二相流特征

通过试验诊断了燃油喷雾在模拟环形燃烧室火焰筒内、外壁面间的二相流型。其结果显示 ,与不受壁面限制的结果相比 ,其基本流型在下游有明显改变     

Experimental Study on Emission Performance of an LPP/TVC

A key issue in the commercial aircraft engine design is environmental acceptability, and designers are continually challenged to reduce emissions. In this paper, an experimental investigation is performed to evaluate the emission performance of a liquid-fueled trapped vortex combustor (TVC) under lean premixed prevaporized (LPP) mode. When operating as an LPP system, a TVC is fueled both in the cavities and in the main stream. The correlations between the emission performance and the total excess air ratio, the positions (4 positions) of the fuel injectors in the main stream, and the inlet temperature are obtained. Experi- mental results show that both the volume concentrations of unburnt hydrocarbon (UHC) and NOx (NO, NO2 usually grouped together as NOx) increase with the increase of total excess air ratio from 1.5 to 3.0; the emission performance relies heavily on the position of the main stream injector, and the best performance is achieved at Position 4 in the experiments; the increase of the inlet temperature impacts on the emission performance positively; the smallest volume concentrations of UHC and NOx obtained in the experiment are 94×10 6 and 2.3×10 6 respectively. This paper validates the feasibility of low emissions for an LPP/TVC and provides a reference for further optimization of TVCs.     

航空发动机单管燃烧室试验器测控系统设计

为满足新型燃烧试验需求,针对航空发动机燃烧室试验中单管试验器的特点,提出并设计了1种基于以太网的分布式测控系统。详细阐述了该系统的总体设计方案,分别从软件和硬件两方面研究分析了该系统的详细设计过程,并对其进行了测量不确定度分析。目前该系统已经完成试验前调试,并已顺利完成了多项单管燃烧室燃烧试验任务。结果表明:该系统可靠性高、稳定性良好、通用性强,满足试验器测控需求,具有较高的工程应用价值。     

地面燃气轮机单管燃烧室流量分配试验

对设计的100kW地面燃气轮机单管燃烧室空气流量分配进行了试验研究。在常压环境下采用堵孔法分别得到了旋流器、主燃孔和掺混孔的流量特性曲线,分析得到燃烧室不同结构的流量系数;试验研究了不同进口流量条件下燃烧室的流量分配,测量得到了燃烧室总压损失。研究发现:随着进口空气流量的增加,燃烧室的流量分配比例基本保持稳定,并且与燃烧室的设计空气比例基本吻合;随着燃烧室进口流量（雷诺数）的增加,旋流器、主燃孔和掺混孔的流量系数呈线性降低;随着进口流量（雷诺数）的增加,燃烧室总压损失逐渐增大;对主燃孔和掺混孔的流量特性测量中,两种测量方法得到的试验结果稍有差别,总体上看两种测量方法的试验结果较为接近。通过对比分析证明两种试验测量方法真实可靠,该研究结果可为100kW地面燃气轮机燃烧室的设计与优化提供依据。