直方管内充分发展湍流的大涡模拟 第二部分

本文第一部分用大涡模拟的方法对直方管内Ｒｅ＝４．９×１０￣４的充分发展湍流运动进行了数值模拟。所得结果证实大涡模拟是高雷诺数复杂湍流运动数值模拟的一个有效手段。在本文第二部分用所得的数据库对湍流运动的结构和形态进行了分析，并且用流体质点运动图形显示了湍流运动的二次流。     

湍流边界层的湍流参数测量和研究

利用DANTEC三维激光多普勒测速仪对水槽壁面边界层的湍流参数进行了测量和分析，并与经典实验曲线做了比较。同时就摩擦速度的计算与涡粘系数的分布曲线展开了讨论。     

In-process adaptive milling for large-scale assembly interfaces of a vertical tail driven by real-time vibration data

Assembly interfaces, the joint surfaces between the vertical tail and rear fuselage of a large aircraft, are thin-wall components. Their machining quality are seriously restricted by the machining vibration. To address this problem, an in-process adaptive milling method is proposed for the large-scale assembly interface driven by real-time machining vibration data. Within this context, the milling operation is first divided into several process steps, and the machining vibration data in each pro...     

弯曲壁面流动分离及再附的尺度解析模拟

为准确预测弯曲壁面发生的流动分离及再附现象,基于模拟应力混合思想构建了新的RANS/LES混合框架,涡黏系数和湍动能耗散项中的长度尺度同步切换、涡解析区动态确定亚过滤尺度模型系数、采用混合过滤尺度匹配动态模型,并据此构造了k-ω基动态应力混合模型。首先利用槽道湍流检验了基准的亚过滤尺度模型和近壁RANS模型,前者解析获得了正确的湍流脉动近壁行为和相干结构,后者以很小代价捕捉到了雷诺应力分量的各向异性和松弛效应。随后利用周期性山算例考核了动态应力混合模型对分离再附湍流的预测精度,并与DDES,IDDES及SAS模型进行了对比。结果表明,三项改进使得动态应力混合模型具有近壁模拟能力且不存在对数律不匹配问题,涡解析能力优于DES类隐含的准代数模型,能够更好地捕捉压力梯度诱导的流动分离和再附,获得更为准确的壁面剪切应力、摩擦系数、压力系数、回流区,分离剪切层相干结构的分辨率更高。     

Active fault tolerant control for vertical tail damaged aircraft with dissimilar redundant actuation system

This paper proposes an active fault-tolerant control strategy for an aircraft with dissim-ilar redundant actuation system (DRAS) that has suffered from vertical tail damage. A damage degree coefficient based on the effective vertical tail area is introduced to parameterize the damaged flight dynamic model. The nonlinear relationship between the damage degree coefficient and the corresponding stability derivatives is considered. Furthermore, the performance degradation of new input channel with electro-hydrostatic actuator (EHA) is also taken into account in the dam-aged flight dynamic model. Based on the accurate damaged flight dynamic model, a composite method of linear quadratic regulator (LQR) integrating model reference adaptive control (MRAC) is proposed to reconfigure the fault-tolerant control law. The numerical simulation results validate the effectiveness of the proposed fault-tolerant control strategy with accurate flight dynamic model. The results also indicate that aircraft with DRAS has better fault-tolerant control ability than the traditional ones when the vertical tail suffers from serious damage.     

欧洲计算流体力学——个人观点

介绍了70年代初到20世纪末欧洲科学家对CFD发展的主要贡献,并重点关注了对国际流体力学数值方法会议(ICNMFD)和国际计算力学学术会议(ISCFD)的成功举办具有重大贡献的科学家.ICNMFD始于1969年(新西伯利亚),由参与了美国和苏联太空竞赛的两国科学家联合创办,而ISCFD则作为ICNMFD在亚太地区的同类会议初创于1995年(东京).由Oshima教授和本人提议,得益于上述两个会议全体科学委员会成员的共同努力,ICNMFD和ISCFD自2000年开始,合并成为每两年举办一次的国际计算流体力学会议(ICCFD).绝大部分本文讨论所涉及的学者通常都在受邀进行大会报告后,成为了前述三大国际会议中的一个或多个科学委员会的成员.作者对文中讨论所涉及的研究人员的圈定负有全权责任,上述人员的选择更多地基于应用而非理论计算流体力学,因此尚存在不完善之处.此外由于文中所讨论的学者大都是作者在40多年计算流体力学研究生涯中的私交好友,因此并没有将年轻一代的科学家考虑进来,但这并非由于他们的贡献不重要.另外值得注意的是欧洲的计算流体力学同美国的计算流体力学有非常紧密的联系,本文讨论所涉及的研究学者有些最早从欧洲开始涉足计算流体力学而现在则生活和工作于美国(例如Glowinski,Roe,Van Leer等人),而有些则是在美国取得了博士学位(例如Launder,Napolitano),他们都同美国的科学家进行过合作,因此很难清晰地对欧洲和美国的计算流体力学进行界定.对那些现已移居美国的欧洲科学家们,本文优先考虑了他们移居之前的贡献.最后但并非是最不重要的,作者通过电子邮件一一联系了文中所涉及的科学家,希望他们本人能够给出其自身贡献的评价草稿,从而帮助作者以最权威的视角在文中相应章节对其工作进行评述.本文向提供自述评价的诸位致以谢意,同时也希望其他同仁能够对本人不恰当的擅自评述给予谅解.     

“大涡破碎”的紊流减阻实验研究

本文对当今国外曾提出的紊流表面摩擦减阻新概念——“大涡破碎”(LEBU)进行了初步的风洞实验探索。将具有对称流线型剖面的二元小肋,沿垂直于气流的方向安置在平板表面的紊流附面层内某一高度处,收到了不同程度的减阻效果。实验中分别考察了小肋的安置位置L,安置高度H,迎角θ及相对厚度b等参数对减阻效果的不同影响。从紊流附面层涡结构的观点出发,提出紊流的“细化”作用是小肋对平扳减阻的根本原因,并认为改善紊流附面层的速度型是研究紊流减阻的一种手段。实验使用自制的高灵敏度摩擦天平,测得的减阻效果与Ludwieg—Tillman公式的计算结果基本一致。     

失速改出伞阻力特征面积估算方法

研究了高平尾布局飞机的气动特性。使用失速改出伞是飞机改出深失速的重要途径,但如何确定失速改出伞的关键参数(阻力面积等)却没有现成的方法。以ARJ21-700飞机为例,分别使用公式分析法、类比法综合估算出失速改出伞的关键参数,通过模型自由飞和模拟仿真分析验证其具有足够效能将飞机改出深失速状态。形成了一套新机失速改出伞的设计方法和关键数据图表,可供其他型号飞机失速改出伞的设计研制使用。     

A new two-scale model for large eddy simulation of wall-bounded flows

A new hybrid approach to model high Reynolds number wall-bounded turbulent flows is developed based on coupling a two-level simulation (TLS) approach (Kemenov and Menon, 2006 [1], 2007 [2] in the inner region with conventional large eddy simulation (LES) away from the wall. This new approach is significantly different from previous near-wall approaches for LES. In this hybrid TLS–LES approach, a very fine small-scale (SS) mesh is embedded inside the coarse LES mesh. The SS equations capture fine-scale temporal and spatial variations in all three Cartesian directions for all three velocity components near the wall. The TLS–LES equations are derived using a new scale separation operator that allows a smooth transition between the two regions, with the equations in the transition region obtained by blending the TLS large-scale and LES equations. New terms in the hybrid region are identified. The TLS–LES approach is used to study the near-wall features in canonical turbulent channel flows for a range of Reynolds number using relatively coarse large-scale (LS) grids. Results show that the TLS–LES approach is able to capture the effect of both the LS and SS features in the wall region consistently for the range of simulated Reynolds number.     

Kinetic theory of the current sheath. II. Effect of polarization on the stability of a current sheath

A procedure for investigating the stability of a current sheath, taking into account the effect of plasma polarization, is offered. The kinetic equation with a self-consistent electromagnetic field for perturbation of the distribution function is solved. On the basis of this solution, the tensor of dielectric permeability for a non-electroneutral current sheath plasma is calculated, and the dispersion equation for the study of possible instability modes of this current sheath is obtained. The instability of the current sheath of the magnetospheric tail with respect to tearing perturbations, and the influence of the effect of plasma polarization on the development of tearing instability, are investigated.