带滑移滞变系统的三阶段逐步收敛的识别方法

针对非线性带滑移滞变系统模型复杂，参数多，识别时收敛困难等问题，提出了一种三阶段逐步收敛的识别方法对Baber与Noori提出的带滑移滞变模型进行了参数识别。计算实例表明，该方法具有收敛速度快、且容易收敛的特点，对于参数较多、模型复杂的系统，是一种非常有效的参数识别方法。     

基于CSCW的分布式多媒体会议系统

CSCW是今后人们利用计算机进行工作的发展趋势，本文介绍了CSCW的背景、概念及其体系结构，重点讲述了目前技术较为完善的基于CSCW的分布式多媒体会议系统，包括其关键技术、系统结构模型以及工作流程等，进一步说明了CSCW在未来多学科领域的广阔前景。     

The Special Purpose Dexterous Manipulator (SPDM) Systems Engineering Effort – A successful exercise in cheaper,faster and (hopefully) better systems engineering

The Special Purpose Dexterous Manipulator (SPDM) is the latest Space Robot developed by the Canadian Space Agency (CSA) and McDonald Detwiller Space and Advanced Robotics (MD Robotics, previously Spar Aerospace) for the International Space Station (ISS). The SPDM has presented its designers with a number of new challenges in performing the Systems Engineering effort required for a complex robotic system:(1) The SPDM initial design was started and attained various levels of maturity for various components under the Space Station Freedom environment, then the Program was stopped and finally restarted under the harsher environment in which the International Space Station is being built.(2) The SPDM is the first space robot to utilize previously developed and space certified robotic components, as well as components with high-commonality to the previously developed ones (electronics, S/W).(3) New requirements levied by the Customer during the negotiations leading to the Program re-start necessitated significant architectural changes versus the SPDM configuration `frozen' when the Program was shut down.(4) The SPDM is the first robotic system of this complexity that is being built under a Firm Fixed Price contract, with the commonality assumptions as one of the cost drivers.This combination of components of various pedigree, coupled with the constraints imposed by an FFP contract have been addressed by the designers through the definition of a novel approach to integrated Systems and Design Engineering.     

液压系统卡紧的原因及排除措施

本文主要阐述了液压系统中出现液压卡紧现象的危害、原因以及排除方法等。     

飞机突防航迹的非线性解耦跟踪

针对12维非线性飞机动力学模型,利用非线性逆系统理论和现代最优控制理论设计了一组非线性飞行控制规律。这组控制规律通过解耦控制飞机的飞行速度(V)、滚转角(φ)、航迹角(γ)和偏航角(φ_w),使飞机能够精确地跟踪期望的三维突防航迹。计算结果表明,由于这组控制规律计及了飞机动力学模型中的非线性因素,能够完全消除飞机的剧烈耦合反应,从而有效地改善了飞机的动态特性,提高了其低空机动飞行的安全性,大大减轻了驾驶员的工作负担和精神压力,从而圆满地完成突防袭击任务。     

时变线性系统的全程滑态变结构控制研究

本文采用分段定常的处理方法研究了一般时变线性系统的滑态变结构控制方案，提出了实时自动分段原则与相应的全程滑态结构控制算法，并通过数字仿真验证了该方案的有效性。     

人—机—环境系统设计中人的性能研究

为了提高人－机－环境系统的性能特性，目前发展了以人为核心的人－机－环境系统设计思想，本文结合该设计思想，进一步分析了人－机－环境系统中人的性能研究的主要方面，提出了多因素耦合作用下人机特性模型将成为今后的主要研究方向。     

基于DTW的HJ-1B卫星地表温度产品质量检验

HJ-1B卫星热红外数据应用广泛,但其地表温度反演产品的质量检验工作尚不完善。以黑河流域为研究区,利用普适性单通道算法得到HJ 1B地表温度,基于7个地面站点（下垫面为荒漠、沙漠、植被、农作物、雪地和湿地）同步观测资料和MODIS地表温度产品（MOD11A1）,引入动态时间规整方法（DTW）对站点处HJ 1B地表温度进行验证。试验结果表明：HJ 1B地表温度反演产品与地面观测值的偏差值在沙漠和荒漠站点为1K以内,均方根误差在05K左右;对于植被和农作物站点的偏差在2K以内,均方根误差为1~2K;基于DTW的验证对时序不匹配的数据评价结果与现有指标表现一致。HJ-1B地表温度反演产品与地面站点的相对偏差均低于其与MODIS地表温度反演产品的相对偏差。     

A novel approach to the attitude stabilization structure for ducted-fan operative aerial robots:Finding improvements for modeling error and strong external transient disturbance

This research concerns a novel attitude stabilization structure for a ducted-fan aerial robot to work against modeling error and strong external transient disturbance, and it focuses on two main control targets: modeling error compensation, and the improvement of disturbance resistance along the rolling channel. For the first research objective, we proposed an adaptive nominal controller with the reconfigurable control law design based on the estimation of the modeling error found in the closed-...     

航天器飞行控制仿真与平行系统

总结并分析了目前国内外航天器飞行控制仿真与平行技术的发展现状和任务需求,针对中国当前飞控仿真与平行系统的通用化和标准化不足的情况,提出了一种可组装的飞控仿真与平行系统的定义和系统架构,阐述了仿真与验证、决策与支持两个部分的设计方案,并通过嫦娥五号的飞控工作进行了检验,验证了系统的有效性。最后展望了未来航天器飞行控制仿真与平行技术的发展方向。