激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

歼×飞机攻角位置误差校准的试验研究

本文简述了目前歼×飞机的攻角位置校准的试验方法。通过分析比较 ,认为采用微波空间定位校准法进行攻角位置误差校准优于目前风洞试验校准法     

手持式激光测距仪"测距标准偏差综合评定"的扩展不确定度

在确定的函数关系(数学模型)中,因变量(输出量)随自变量(输入量)的变化规律完全由数学逻辑所确定,自变量到因变量的传递系数(灵敏系数)也可由因变量的标准差和自变量的标准差之比所决定,而与自变量的来历(测量的或者给定的)没有关系[1].本文根据这一基本原理,采用模拟自变量随机变化的方法,成功计算了手持式激光测距仪的测距固定偏差和比例偏差系数的测量不确定度,从而计算出测距标准差综合评定的扩展不确定度,同时解决了复杂的数学模型中多个输入量到输出量的灵敏系数和输出量的不确定度的计算问题.     

卫星ATM网络中自适应FEC情况下的有效带宽估计

针对采用自适应前向差错控制（AFEC）的卫星异步传递模式（ATM）网络，研究了两种有效带宽估计方法。由于AFEC码率的动态特性使业务实际的传输速率具有不固定性，因此估计有效带宽时要考虑AFEC的影响。首先针对一般卫星时变信道和多码率AFEC情况下的卫星ATM，应用流体近似方法分析了有效带宽的计算，然而该方法要求的条件及计算复杂度均比较高，应用中有局限性。以此方法为基础，提出了采用修正因子的估计方法。数值结果表明采用修正因子的有效带宽估计方法比较简单可靠，适用面较广。     

圆柱度误差最小区域评定方法述评

本文简介圆柱度误差评定的常用数学模型，并对用最小区域法评定圆柱度误差的几种近似方法及其优缺点展开讨论。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

Plane wave spectrum and boresight error of radome-enclosed antennas

Ａｉｒｂｏｒｎｅｒａｄｏｍｅｍａｙｉｎｔｒｏｄｕｃｅｓｉｇｎｉｆｉｃａｎｔｐｅｒｆｏｒｍａｎｃｅｄｅｇｒａｄａｔｉｏｎｔｏａｎｔｅｎｎａａｎｄｒａｄａｒｓｙｓｔｅｍｓ,ｅｖｅｎｉｆｄｅｓｉｇｎｅｄｅｌａｂｏｒａｔｅｌｙ．Ｓｉｎｃｅｒａｄｏｍｅｉｓａｄ...     

线性分组码限距离译码器的性能分析

为了提高自动重传请求(ARQ)系统的通过率,在混合ARQ系统中,使用限距离译码器改善系统的性能。在限距离译码时,线性分组码纠正重量t的错误图样。纯纠错译码器和纯检错译码器都是限距离译码器的特例。本文首先介绍了Krautchouk多项式的几个重要性质,然后,用线性分组码及其对偶码的重量分布,分别导出了两种形式的错误译码概率的简化计算公式。由于生成函数方法的使用,成功地得到了重复码、汉明码和扩展汉明码的错误译码概率的解析公式,最后,讨论了Golay码和某些本原BCH码错误译码概率的计算方法。