Charge exchange interactions on near-Earth proton radiation for orbit perturbation of high area-to-mass ratio objects

This novel concept expels neutral gas in the presence of geomagnetically-trapped protons in near-Earth orbit. The expelled neutral gas acts to induce charge exchange collisions with the geomagnetically-trapped protons and induce drag on objects which pass through it. The charge exchange collisions between the neutral gas and the geomagnetically-trapped protons create neutrals with similar kinetic energy that are not confined by the geomagnetic field. The charge exchange neutrals are able to collide with orbital objects and perturb their orbits. The delta-v applied by the charge exchange neutral flux is greatest on high area-to-mass objects. Numerical simulation shows charge exchange neutral impacts produce a delta-v on objects on the order of 3.8 x 10⁻¹¹ m/s at a distance of 1 km from the center of the expelled gas in a 1,000 km orbit. The impulse imparted by charge exchange neutral impacts is at least six orders of magnitude smaller than that provided by the induced drag caused by gas expulsion. The localized drag increase can force a majority of small objects into the orbit of the expelled gas cloud, even if that orbit is retrograde to the initial orbit of the objects. This new technique can be applied to the remediation of space debris.     

风扇出口导向叶片低噪声设计Ⅰ:方法与优化

作为"风扇出口导向叶片（Outlet Guide Vanes，OGV）低噪声设计"系列文章的第1篇，本文在现有压气机气动设计流程的基础上，加入了噪声评估过程，建立了基于通流设计的气动/声学一体化设计方法。为提高设计阶段的评估速度，以三维升力面理论与管道声学理论为基础，从通流设计和造型设计输出中提取参数，结合转子尾迹模型，建立了转/静干涉噪声的解析预测模型。以现代大涵道比涡扇发动机风扇/增压级为对象，采用该模型系统分析了OGV轴向掠形与周向倾斜对转/静干涉噪声的影响，获取了轴向掠形角与周向倾斜角等三维设计参数与风扇噪声的关系图谱，初步确定了低噪声设计较优降噪量的掠和倾组合方案。以此为基础，在保持叶尖子午投影位置和弦长不变的前提下，将叶片前缘和径向积叠进行参数化，采用遗传算法进一步开展了OGV的低噪声优化设计，最终获得了2个优化方案，预估的降噪量达到了8 dB。     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.     

小直径深孔加工技术在航空机载行业中的应用

分析总结了国内外小直径深孔加工技术后,介绍了小直径深孔加工技术在航空机载行业中的应用,及其小直径深孔加工时设备选型需注意的问题。     

注气离心喷嘴喷注过程稳定性试验

为了解管路注气对补燃循环液氧煤油发动机预燃室煤油离心喷嘴喷注过程稳定性的影响，在大气环境下开展了敞口型离心喷嘴注气时喷注过程稳定性试验。使用注气装置在离心喷嘴的上游供应管路中注入空气，通过高速相机记录管路内的两相流特征和喷嘴喷注过程的振荡特征，采用图像区域亮度分析方法定量评估喷注过程的振荡强度。研究发现：注气能显著改变敞口型离心喷嘴的喷注雾化过程及稳定性特征；注气后雾化液膜破碎距离缩短且喷雾角减小，喷注过程出现明显的振荡并伴随Klystron效应；管路内两相流的气泡尺度较大且切向孔较小时，喷注过程的振荡幅值较大；随着注气量增加，喷注过程的振荡频率降低；气泡尺度及两相流型对离心喷嘴喷注振荡过程的影响与普通气泡雾化喷嘴的显著不同，柱状流型时离心喷嘴喷注过程出现1~3 Hz流量振荡且可能间歇性断流。气泡对切向孔的间歇性堵塞作用可能是喷注过程振荡及Klystron效应的原因。     

外围投篮命中率的概率分析

利用几何概率的方法，解决投篮命中率问题，为将概率论应用到体育中去提供了新的思路。     

3R-3URU可展单元机构及其在构架式可展天线中的应用

提出了一种空间单自由度(DOF)可展单元机构3R-3URU。首先,基于螺旋理论和修正的G-K公式分析了RURUR单闭环机构的自由度,建立了该机构中主动关节和被动关节速度之间的解析关系式,基于此关系式和3个RURUR机构共用首尾转动副的结构特点推导了3R-3URU单元机构的自由度,得到了3R-3URU机构具有1个自由度时各运动副的方向和位置满足的几何关系式。其次,将3R-3URU机构应用于3RR-3RRR四面体可展单元及其组成的球面构架式可展天线中,得到了具有收拢和调姿两种自由度的新型可展机构。最后,利用Adams软件对3R-3URU可展单元机构的自由度和其在四面体构架式可展天线中的应用进行了仿真验证。该3R-3URU可展单元机构具有单自由度、铰链种类少、结构简单等优点,可用于曲面构架式可展天线的支撑机构中,实现大折叠比。     

特大展弦比机翼的特性与设计

大展弦比机翼有明显的升/阻(L/D)优势。但随着机翼展弦比的增大,在机翼结构重量控制条件下,机翼成柔性机翼,飞行中机翼的弹性变形量随速压(1/2ρV2)增大而增大,出现了严重的气动/结构耦合的问题。本文阐述了耦合问题的成因和解决途径,为特大展弦比机翼飞机(长航时无人机)的设计提供参考。     

脉冲爆震发动机稳定工作性能的实验研究

为了对脉冲爆震发动机不同工作频率下稳定工作范围进行深入的研究,实验对汽油/空气可爆混气在不同工作频率、不同当量比下爆震发动机模型机的爆震压力和推力进行了测试,找出了不同频率下发动机稳定工作的最大和最小当量比。实验发现,当工作频率较低时发动机的稳定工作范围较宽,随着工作频率的增大,发动机的稳定工作范围逐渐变窄。在同一工作频率下,爆震发动机的平均推力随着当量比的增加是先增后降,但变化幅度很小,而混合比冲则是随着当量比的增加急剧下降。另外,在当量比一定的情况下,脉冲爆震发动机的平均推力随着工作频率的提高接近线性增加。     

液晶瞬态技术测量带侧向流扰流柱通道端壁换热

采用热色液晶瞬态测量技术测量带侧向流扰流柱通道端壁全表面换热系数的分布,研究了侧流比及雷诺数对换热的影响,其中,侧流比为0.25~1.0,雷诺数为3×104~9×104。结果表明:(1)侧流比对扰流柱通道的流动形态及端壁换热有重要影响;(2)存在一个临界侧流比,在临界侧流比以下,流动形态沿主流方向呈错排流状态;在临界侧流比以上,流动形态沿侧流方向呈错排流状态;在临界侧流比附近,流动为顺排流动状态,方向在主流和侧流方向之间;(3)侧流比较小或较大时,扰流柱通道端壁换热较强;在临界侧流比附近,换热相对较弱。