Experimental method for and defect tolerance of fixed plate theoretical research on based on damage mechanics

An experimental method and a theoretical analysis based on continuum damage mechan- ics are applied for the defects tolerance of fixed plate. The defects type studied in this article is scratch, which is considered a typical defect on fixed plate according to the engineering practice. The general approach to the defects tolerance analysis of scratched fixed plate is presented. The method of fatigue life prediction for standard notched specimens has been established on the basis of continuum damage mechanics. For the purpose of obtaining the influence law of fatigue life in consequence of scratches, fatigue experiments of standard notched specimens and scratched specimens have been done. Evalu- ation of the fatigue life of scratched fixed plate has been carried out. And the value of scratch defects permissible to the condition of safety service life has been worked out. According to the results of the- oretical calculations, the fatigue experiment of scratched fixed plate has been performed. The outcome shows that the theoretical prediction tallies with the experimental results.     

国际空间站日本舱信息系统早期设计分析

文章基于国际空间站日本实验舱早期总体定义阶段的活动研究成果，概述了日本实验舱信息系统的结构、通信链路环境、系统基本组成要素，并详细介绍了信息系统的需求、功能、子系统、硬件架构、软件结构以及与美国舱信息接口等关键点。最后总结分析了日本实验舱信息系统的典型特点，包括通信链路备份、核心网络与有效栽荷网络相互独立、数据传输线路优化、分层控制体系、光技术应用、CCSDS标准应用、软件分层模块化设计等。     

注装梯恩梯(TNT)装药冲击Hugoniot参数的实验测定

本文利用一级轻气炮实验技术，对注装梯恩梯药进行了高应变率下的动态冲击实验，对实验方法进行了改进，设计了一种新型的轻气炮延伸炮管。根据实验数据结果，得到了注装ＴＮＴ装药的冲击Ｈｕｇｏｎｉｏｔ参数。     

发展设计性实验 培养学生综合能力

本文阐述在实验教学中,发展设计性实验可提高学生独立分析问题与解决工程实际问题的综合能力,同时也为学生后续的毕业设计,顺利走上工作岗位奠定坚实的基础。     

飞机座舱人机工效评定实验台研制

为解决飞机人机界面设计在新形势下面临的问题,研制了一套基于飞行模拟器的驾驶员工效评定实验台,以便在更加实际的飞行情况下对飞行员的认知特性进行研究.该实验台由飞机座舱、仿真软件、计算机系统和生理参数测量系统等组成,能开展座舱优化布局、界面信息显示适人性、脑力负荷的综合评定等研究.该实验台的研制为飞机人机界面的工效设计和评定提供了一种新的方法.     

Friction and Wear Properties of Amorphous Carbon Nitride Coatings in Water Lubrication

The friction and wear properties of amorphous carbon nitride(a-CN x)coatings in water lubrication were reviewed.The influences of mating materials and tribological variables such as normal load(W)and sliding speed(V)on the friction and wear properties of the a-CN x coatings were analyzed.It was indicated that the specific wear rate of the a-CN x coatings was related to the hydration reaction of mating materials with water.If the mating materials were easily hydrated,the specific wear rate of a-CN x coatings was low.The water-lubricated properties of the a-CN x coatings were better in comparison to the a-C coatings.The a-CN x/Si-based non-oxide ceramics tribo-pairs exhibited the lowest friction coefficient and wear rate.To describe their friction and wear properties at the normal loads of 3—15Nand the sliding speeds of 0.05—0.5m/s,the wear-mechanism maps for the a-CN x/SiC(Si3N4)tribo-pairs in water were developed.     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

火星进入气体辐射加热研究进展

针对飞行器进入火星大气时气体辐射加热对防热设计带来不确定性，在简述火星探测和气体辐射研究的发展历程的基础上，对火星进入气体辐射加热研究的进展进行综述。首先，针对火星大气环境描述了气体辐射加热的概念和问题由来。其次，重点综述了近年来火星进入气体辐射加热基础模型的数值和试验研究进展，其中包括：热化学非平衡气体动力学、气体辐射特性和辐射传输的计算模型与方法等数值研究；地面测试设备、试验技术和模拟火星大气环境的气体辐射测量与验证等试验研究。再次，综述了流动辐射耦合和后体气体辐射加热等火星进入器设计方面开展的研究。最后，对未来火星进入气体辐射加热研究进行了展望，提出了研究建议。     

An adaptive sequential experiment design method for model validation

Efficient experiment design is of great significance for the validation of simulation model with high nonlinearity and large input space. Excessive validation experiment raises the cost while insufficient test increases the risks of accepting an invalid model. In this paper, an adaptive sequential experiment design method combining global exploration criterion and local exploitation criterion is proposed. The exploration criterion utilizes discrepancy metric to improve the space-filling property of the design points while the exploitation criterion employs the leave one out error to discover informative points. To avoid the clustering of samples in the local region, an adaptive weight updating approach is provided to maintain the balance between exploration and exploitation. Besides, the credibility distribution function characterizing the relationship between the input and result credibility is introduced to support the model validation experiment design. Finally, six benchmark problems and an engineering case are applied to examine the performance of the proposed method. The experiments indicate that the proposed method achieves satisfactory performance for function approximation in accuracy and convergence.     

An assessment of semi-analytical models based on the absorption coefficient in retrieving the chlorophyll-a concentration from a reservoir

Monitoring chlorophyll-a (Chl-a) concentrations in inland waters is crucial for water quality management, since Chl-a is a proxy for phytoplankton biomass and, thus, for ecological health of a water environment. Chl-a concentration can be retrieved through the inherent optical properties (IOPs) of a water system, which, in turn, can be remotely sensed obtained. Quasi-analytical algorithm (QAA), originally developed for ocean waters, can also retrieve IOPs for inland waters after re-parameterizations. This study is aimed at assessing the performance of sixteen schemes composed by QAA original and re-parameterized versions followed by models that use absorption coefficients as inputs for estimating Chl-a concentration in Ibitinga reservoir, located at Tietê River cascading system, São Paulo State, Brazil. It was verified that only QAA_V5 based schemes were able to obtain reasonable estimates for image data and that by four models tested presented similar and acceptable results for QAA_V5 outputs. The best model were applied to a Ocean and Land Colour Instrument (OLCI) image. Light absorption in the reservoir showed to be dominated by colored dissolved organic matter (CDOM), and wide spatial and temporal variability of optical and water quality properties was observed.