Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

新型航空发动机空气冷却器流动传热性能试验

空气冷却器是航空发动机中空气热量交换的重要场所,针对传统扰动结构强化换热不足问题,重点研究了空气冷却器 中扰动结构的结构形貌特征与流动换热的关系。以三周期极小曲面结构为基础,设计制造了D型极小曲面扰动结构、P型极小曲 面扰动结构和基于Sigmoid函数杂化方法的D-P型（P-D型）结构。并利用纳米CT重构出样品的3维数字特征,试验研究了不同结 构来流速度与压降、换热性能和综合换热性能的关系。结果表明：D型极小曲面结构具有最优的压降、换热性能和综合换热性能： D-P型杂化极小曲面结构的阻力系数f最大,比D型结构的高56.81%;D型的平均努塞尔数Nu比P型的高18.49%,P-D和D-P杂 化结构的换热性能比P型结构的有效提高;P-D型D-P型杂化结构的Nu分别比P型结构的高2%和8.27%。在4种结构中,D型结 构的综合换热性能最优,分别比P型、P-D型、D-P型结构的高40.35%、57.2%、71.02%。     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。     

基于自由型曲面的贴体网格生成

本文建立了基于自由型曲面的曲面网格生成的数学模型,生成了曲面网格,把它作为三维Ｄｉｒｉｃｈｌｅｔ问题的边界条件,求解三维Ｐｏｉｓｓｏｎ方程,获得了满足数值模拟要求的三维贴体网格。采用上述方法,完成了基于自由型曲面的某直升机调座舱三维贴体网格的生成,结果令人满意。     

基于复杂截线的NURBS双向蒙皮造型方法

通过对NURBS造型方法技术的研究,在我校自主开发的SuperManCAD/CAM集成系统中成功地实现了基于复杂曲线的NURBS双向蒙皮曲面的造型功能,建立了完全基于NURBS方法的CAD/CAM系统。大量的工程应用和实例验证,表明本研究的NURBS方法是一种适用于复杂外形产品设计与制造的、灵活有效的造型方法。     

沿曲面交线多坐标数控加工的算法研究

分析了曲面交线加工中刀具的偏置类型,提出了新的交线加工刀位轨迹生成算法。该算法利用曲面跟踪求交算法计算两曲面交线,并根据交线处曲面局部微分几何性质推算刀具的初始位置,然后采用牛顿迭代算法精确刀位。该算法的优点是能够精确控制刀具与曲面的加工误差,可处理单支点、双支点偏置情况下球头刀、平底刀、圆角刀的交线域加工,算法稳定、统一。     

一种有效的消波装置

对无限长渠道中小振幅入射波通过两块间距为ｌ,透水性能不同的多孔透水板的反射和透射进行了研究。应用分离变量法得到了反射波和透射波的波形。结果表明,当ｌ为入射波半波长的倍数时,反射波和透射波振幅最大,消波效果差,最佳消波率为５０％。当ｌ为入射波１／４波长加半波长的倍数时,反射波和透射波振幅最小,消波效果好,最佳消波率大于５０％。此外,还得到了无反射波的条件。     

频率选择表面机载雷达天线的研究

研究了降低机载雷达天线散射截面的频率选择表面(FSS)极化扭转板。根据Floquet定理利用模式电压概念建立矢量模式,对二维周期阵列的频率选择表面进行理论分析和计算。设计并加工了一种降低机载雷达天线散射载面的频率选择表面极化扭转板结构。计算和实验表明:频率选择表面的极化扭转板在雷达天线工作通带内保持与原极化扭转板的性能不变,而在工作通带外具有降低雷达散射载面的效果。降低雷达散射截面7～10dB。