一种薄壁悬臂叶片数控加工非均匀余量刚度补偿方法

 在数控加工过程中,因受到切削力的影响,薄壁悬臂叶片容易出现弯曲、扭转变形等问题而导致被加工曲面误差较大。针对该问题,提出了一种非均匀余量刚度补偿方法,将非均匀余量偏置面作为粗加工/半精加工零件面以提高叶片精加工时的抗弯刚度。首先,分析了集中力载荷下截面厚度对薄壁工件变形的影响;然后,对叶片径向和截面线方向分别采用线性变化和正弦函数变化两种方法进行叶片曲面非均匀余量刚度补偿设计;最后,基于叶片原始截面线,采用放样法构造出叶片曲面的非均匀余量偏置面。试验结果表明,采用非均匀余量刚度补偿方法可以提高被加工叶片精加工时的刚度,加工出的叶片满足了设计误差要求。     

Form-finding methods for deployable mesh reflector antennas

Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.     

Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

The aim of this study is to define optimal tooth modifications, introduced by appropriately chosen head-cutter geometry and machine tool setting, to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear (transmission error) of face-hobbed spiral bevel gears. As a result of these modifications, the gear pair becomes mismatched, and a point contact replaces the theoretical line contact. In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the ’’potential’’ contact line. A computer program was developed to implement the formulation provided above. By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions, transmission errors, and fillet stresses is investigated and discussed. The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.     

磁层中重离子O＋通量密度分布的理论研究

应用求解得到的分布函数，研究了北半球子午面内极光带区起源的重离子Ｏ＋在磁层中的通量密度定态分布及其特性．结果表明：（１）重离子Ｏ＋通量密度分布沿ＧＳＭＺ轴方向呈峰状结构，其峰值随地心距离增大而减小，在近地空间减小较快；（２）磁扰动时，Ｏ＋离子占据的空间范围较磁宁静时大，通量峰较不突出；（３）理论估算的磁尾等离子体片边界层附近重离子Ｏ＋通量密度与观测结果相一致．     

Heliotropic dust rings for Earth climate engineering

This paper examines the concept of a Sun-pointing elliptical Earth ring comprised of dust grains to offset global warming. A new family of non-Keplerian periodic orbits, under the effects of solar radiation pressure and the Earth’s J₂ oblateness perturbation, is used to increase the lifetime of the passive cloud of particles and, thus, increase the efficiency of this geoengineering strategy. An analytical model is used to predict the orbit evolution of the dust ring due to solar-radiation pressure and the J₂ effect. The attenuation of the solar radiation can then be calculated from the ring model. In comparison to circular orbits, eccentric orbits yield a more stable environment for small grain sizes and therefore achieve higher efficiencies when the orbit decay of the material is considered. Moreover, the novel orbital dynamics experienced by high area-to-mass ratio objects, influenced by solar radiation pressure and the J₂ effect, ensure the ring will maintain a permanent heliotropic shape, with dust spending the largest portion of time on the Sun facing side of the orbit. It is envisaged that small dust grains can be released from a circular generator orbit with an initial impulse to enter an eccentric orbit with Sun-facing apogee. Finally, a lowest estimate of 1 × 10¹² kg of material is computed as the total mass required to offset the effects of global warming.     

飞行器航迹倾角的自适应动态面控制

针对飞行器纵向模型具有参数不确定性和外界干扰的特点,提出一种飞行器航迹倾角的自适应动态面控制方法.动态面控制方法通过引入一阶低通滤波器避免了传统反演设计存在的"微分爆炸"现象,采用自适应律对模型未知参数进行在线估计,并利用非线性阻尼项克服外界干扰.通过Lyapunov方法证明得出闭环系统半全局一致稳定,跟踪误差可通过调节控制器参数达到任意小.仿真结果表明:该方法能在简化控制设计过程的同时保证航迹倾角跟踪上预定轨迹,控制系统具有较强的自适应能力且对外界干扰具有一定的鲁棒性.     

脉冲等离子体源控制航天器表面充电电位的研究

在空间环境运行的航天器存在表面充电现象,而航天器表面充电引发的静电放电是导致航天器异常及故障的重要原因之一。因此,在航天器设计和应用中,必须对航天器表面电位采取必要的控制和防护措施。文章介绍了用脉冲等离子体源进行航天器表面充电电位主动控制的研究。通过模拟实验和实验数据分析,证实了用脉冲等离子体源能有效地控制航天器表面充...     

来流条件对热流组分扩散项影响效应分析

使用数值模拟的方法研究了高超声速热化学非平衡流动中不同来流条件对热流组分扩散项的影响。以RAM-CII飞行试验外形为例,使用AUSM+-up格式耦合LU-SGS方法求解带化学反应源项的多组分NS方程。得到如下结论:在非平衡热环境数值模拟研究中,完全催化壁时组分扩散项热流所占比率表征了壁面催化效应的强弱;在同一高度下,随着马赫数升高热流组分扩散项比例越来越显著,而马赫数相同时,随着高度增高热流组分扩散项所占比例越来越小,主要原因在于当地化学反应进行程度不同。     

多操纵面飞翼构型飞机舵面故障在线诊断方法

舵面故障会影响飞机的操纵性,为实现飞机的控制重构需在线诊断出舵面的故障信息.针对多操纵面飞翼构型飞机,提出了一种在线诊断其舵面故障的方法.飞翼构型飞机舵面故障在线诊断需辨识的操纵导数个数较多,直接使用最小二乘法难以精确辨识得到各操纵导数.基于限定记忆最小二乘法,采用分组辨识法对飞机的操纵导数进行辨识,减少了每次辨识操纵...     

全流量补燃循环发动机系统参数模型与设计(Ⅱ)参数设计

在全流量补燃循环发动机系统动力平衡模型的基础上,研究了氢发汗冷却流量、燃烧室压力和燃烧室混合比对发动机系统参数的影响规律.研究结果表明:在发动机推力和喷管扩张比保持恒定时,①随着氢发汗冷却流量的增加,燃料泵扬程大幅度增大,氧化剂泵扬程小幅度减小;②当燃烧室压力在20MPa之前,泵的扬程增加与燃烧室压力的增加近似成线性;...