航天材料热物理性能测试技术的发展现状

根据航天材料热物理性能测试技术的特点 ,系统介绍了国内航天材料热物理性能测试技术的发展状况和发展趋势 ,并详细介绍了目前我国航天材料热物理性能测试领域中所具备的测试技术和测试装置、航天热物理性能所涉及的研究领域和内容以及目前正在开展的研究工作。     

半浮区液桥自由面振荡特征

使用一套双路同步显微放大录像及图像处理系统,研究了夹角为90°的两个竖直剖面沿轴向不同高度液桥自由表面的位移振荡,得到轴向不同高度上的环向相位差,观测到在振荡周期内液桥表面轮廓线在不同时刻均不相交的特点。实验结果表明,液桥自由面振荡除具有径向扰动及轴向振荡变化外,还存在环向波动变化。根据实验结果,讨论了环向波动基本变化规律以及本实验在测量精度和测量误差方面存在的问题。     

喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

数字化技术在叶轮研制中的应用

本文通过分析归纳建立了一种叶轮数字化建模方法，并利用该方法成功实现了某型叶轮三维模型创建，同时也根据该数字化模型实现了模具数字化设计及其数控加工。     

基于激光的便携式飞机装配接缝质量检测仪及应用

介绍了一种基于激光的便携式接缝质量检测仪的工作原理及硬件组成。使用该检测仪对飞机缝隙和台阶阶差进行了测量,通过与人工测量进行对比验证,证明了该装置可实现对特征三维信息的快速自动检测,工作准确可靠。     

一种叶片截面线光顺及等距面生成方法

采用等距面生成球头刀加工刀具轨迹是曲面加工中一种常用的方法。但是,在对叶身曲面进行等距偏置时,经常出现无法偏置的问题。针对该问题,分析了曲面偏置自相交原因,并根据叶片类零件叶身曲面的特点,提出了一种叶身截面线光顺及等距面生成方法。该方法首先采用Kjellander方法将原始截面线进行自动光顺,然后根据光顺后的原始截面线和数据采样法构造偏置截面线,最后通过截面线放样法构造叶身曲面等距面。实例表明,采用Kjellander方法可以实现叶片曲面的自动光顺和叶片曲面等距面的构造。     

丁腈橡胶增韧环氧树脂基烧蚀防热材料性能

以丁腈橡胶(CTBN)为增韧剂对环氧树脂(F51)进行增韧改性,通过FTIR、TG以及力学性能测试研究了丁腈橡胶对环氧树脂固化反应、热稳定性能和力学性能的影响,并分析了其增韧机理;分别采用燃气流剪切烧蚀试验和电弧风动烧蚀实验考核了低密度烧蚀材料的烧蚀性能。结果表明:经CTBN改性后,两者的分子链产生了一定程度的交联;树脂基体的拉伸、弯曲性能有所下降,但韧性得到了增强;热稳定性大大提高,增韧后的F51树脂在800℃时的残重率由增韧前的23%提高到了54%;低密度烧蚀材料的抗剪切、抗剥蚀能力得到了增强,且碳层的尺寸稳定性也得到了改善,烧蚀性能提高。     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

PBT弹性体力学性能及低温脆性研究

采用一步法制备了热固性3,3-双(叠氮甲基)环氧丁烷-四氢呋喃共聚醚(PBT)弹性体,并对其氢键结构、应力-应变关系和动态力学性能及低温脆性进行了研究。结果表明,合成的PBT弹性体拉伸强度和断裂伸长率在DEG羟基含量为35%、R=0.97时,可达2.51 MPa和1 274%,玻璃化温度为-34.5℃。高DEG含量的PBT弹性体脆化参数较低,与常温力学性能变化规律相反。因此,引入低温脆化参数,对PBT弹性体的性能优化具有积极意义。