基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

航空器失事时搜寻区域的确定方法

提出根据航空器失事时最后已知的报告或其它位置信息建立最初的搜寻范围，确定第一和第二优先搜寻区的方法，及在无法搜寻找到飞机残骸或幸存者时搜寻区域的扩大广泛和调整方法。确定了划分搜寻区域的指导方针，以及在受天气情况、地形和海流影响时，确定搜寻区的具体调整方法。     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

歼×飞机攻角位置误差校准的试验研究

本文简述了目前歼×飞机的攻角位置校准的试验方法。通过分析比较 ,认为采用微波空间定位校准法进行攻角位置误差校准优于目前风洞试验校准法     

用于评定火炮火力支援效果的马尔科夫模型

根据炮兵作战理论和实际作战流程，建立了用于评定间瞄武器进行火力支援的作战效能模型。该模型不仅可以比较不同火炮系统的作战效能，还可通过修改模型参数使其能反映不同的作战强度，对炮兵的战术决策有一定的参考意义。     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

Increased BLSS closure using mineralized human waste in plant cultivation on a neutral substrate

The purpose of this work was to study the full-scale potential use of human mineralized waste (feces and urine) as a source of mineral elements for plant cultivation in a biological life support system (BLSS). Plants that are potential candidates for a photosynthesizing link were grown on a neutral solution containing human mineralized waste. Spring wheat Triticum aestivum L., peas Pisum sativum L. Ambrosia cultivar and leaf lettuce Lactuca sativa L., Vitaminny variety, were used. The plants were grown hydroponically on expanded clay aggregates in a vegetation chamber in constant environmental conditions. During plant growth, a determined amount of human mineralized waste was added daily to the nutrient solution. The nutrient solution remained unchanged throughout the vegetation period. Estimated plant requirements for macro-elements were based on a total biological productivity of 0.04 kg day⁻¹ m⁻². As the plant requirements for potassium exceeded the potassium content of human waste, a water extract of wheat straw containing the required amount of potassium was added to the nutrient solution. The Knop’s solution was used in the control experiments.     

快速拉格朗日差分法在巷道锚杆支护计算中的应用

快速拉格朗日法是一种新型的数值计算方法。本文介绍了快速拉格朗日法的基本原理和分析过程；并将这种方法应用于巷道锚杆支护的计算中，对锚杆支护前后围岩的变形进行了对比。结果表明锚杆在控制围岩垂直方向的变形有明显的作用。     

弹性飞行器敏感元件位置设置与参数优化综合

本文研究了弹性飞行器敏感元件位置的设置问题，分析了敏感元件位置对弹性飞行器稳定性的影响，提出了几类飞行器自动驾驶仪敏感元件可能合适位置的选择准则。从飞行器弹性振动闭环系统方程出发研究了弹性飞行器参数优化综合的某些方法。通过算例得到控制系统返馈系数，陀螺位置，舵面位置优化综合的数值模拟结果。这些结果与该飞行器实际采用的值符合较好。     

Algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter

The algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter is considered; the support makes it possible to significantly reduce accumulating errors that are due to incomplete data on wind parameters and decrease requirements for random errors of initial data sensors.