沟槽面湍流边界层湍流度分布

应用激光测速(LDV)技术对沟槽面湍流边界层湍流度分布进行了精细的测量,实验结果表明,在湍流边界层区域沟槽面湍流度最大值比光滑面要小,但出现的位置比光滑面要远.此外,紧靠沟槽面,即y++<4内,沟槽面有较大的湍流度,说明沟槽面有使近壁区流动紊动增加的趋势.对于y/δ≥0.06的区域,湍流度可用u′\u=2.3 exp (-0.9y/δ)描述,而在y/δ<0.06内,则有u′/u =36.4y/δ.     

Water surface temperature estimation from Landsat 7 ETM+ thermal infrared data using the generalized single-channel method: Case study of Embalse del Río Tercero (Córdoba,Argentina)

Monitoring of warm distribution in water is fundamental to understand the performance and functioning of reservoirs and lakes. Surface water temperature is a key parameter in the physics of aquatic systems processes since it is closely related to the energy fluxes through the water–atmosphere interface. Remote sensing applied to water quality studies in inland waterbodies is a powerful tool that can provide additional information difficult to achieve by other means. The combination of good real-time coverage, spatial resolution and free availability of data makes Landsat system a proper alternative. Many papers have developed algorithms to retrieve surface temperature (principally, land surface temperature) from at-sensor and surface emissivity data. The aim of this study is to apply the single-channel generalized method (SCGM) developed by Jiménez-Muñoz and Sobrino (2003) for the estimation of water surface temperature from Landsat 7 ETM+ thermal bands. We consider a constant water emissivity value (0.9885) and we compare the results with radiative transfer classic method (RTM).     

月球着陆探测器发动机推力线测量及标定

月球着陆探测器发动机推力线测量及标定是发动机装配与调整的关键环节.通过创建精测镜坐标系,实现发动机在对接面坐标系中的推力线平行量与偏斜的转换,得到热试车后标定推力线的方法.通过发动机热试车后数据分析,推力线测量及标定方法满足技术条件要求.     

基于电子束蒸发沉积的曲面纳米薄膜均匀性研究

半球谐振子金属化是半球谐振陀螺研制过程中的重要环节，针对半球表面薄膜制备均匀性难以实现的问题，提出了一种将薄膜沉积实验和光学模拟相结合的方法。本文采用电子束蒸发技术在半球上沉积Au薄膜，利用台阶仪测量球面上不同位点的薄膜厚度，将平面上的膜厚等效为半球曲面上的膜厚，研究球面薄膜的均匀性，得出了在半球内外表面上薄膜的膜厚分布；同时对薄膜沉积均匀性进行光学模拟，将半球探测器上辐照度等效为实验中沉积所得到的薄膜厚度，计算得出的半球探测器上辐照度分布与实验测量结果一致性较好，可为半球谐振子纳米薄膜的均匀性制备提供理论基础。     

Recent ozone investigations over Bulgaria by remote sensing: Ground-based and satellite data

This presentation deals with the recent investigations of the dynamics of the total ozone content (TOC) and of the lower troposphere ozone over Bulgaria, South-Eastern Europe.     

On prediction of re-entry time of an upper stage from GTO

The evolution of objects in geostationary transfer orbit (GTO) is determined by a complex interplay of atmospheric drag and luni-solar gravity. These orbits are highly eccentric (eccentricity >0.7) and have large variations in velocity and perturbations during a revolution. The periodic changes in the perigee altitudes of these orbits are mainly due to the gravitational perturbations of the Sun and the Moon. The re-entry time of the objects in such orbits is sensitive to the initial conditions. The aim of this paper is to study the re-entry time of the cryogenic stage of the Indian geo-synchronous launch vehicle, GSLV-F04/CS, which has been decaying since 2 September 2007 from initial orbit with eccentricity equal to 0.706. Two parameters, initial eccentricity and ballistic coefficient, are chosen for optimal estimation. It is known that the errors are more in eccentricity for the observations based on two line elements (TLEs). These two parameters are computed with response surface method using a genetic algorithm for the selected eight different zones, based on rough linear variation of the mean apogee altitude during 200 days orbit evolution. The study shows that the GSLV-F04/CS will re-enter between 5 December 2010 and 7 January 2011. The methodology is also applied to study the re-entry of six decayed objects (cryogenic stages of GSLV and Molniya satellites). Good agreement is noticed between the actual and the predicted re-entry times. The absolute percentage error in re-entry prediction time for all the six objects is found to be less than 7%. The present methodology is being adopted at Vikram Sarabhai Space Centre (VSSC) to predict the re-entry time of GSLV-F04/CS.     

基于旋度计算的流面生成算法研究

三维流场可视化一直以来是个很具有挑战性的问题.介绍了基于流线连接的流面生成方法,针对发散场中流线间距过大的问题,提出基于旋度计算的流面生成方法,通过流线法向量连线生成具有较好视觉效果的流带和流面,最后选取CDC风场数据对算法进行检验.     

基于NURBS曲面的雷达散射截面物理光学算法研究

文章实现了一种使用物理光学（PO）计算雷达散射截面的算法。目标模型用非均匀有理B样条（NURBS）曲面建立，并使用等参数等弦长方法剖分为Ⅳ个四边形面元。在剖分面元上，使用Gordon方法将物理光学积分转化为闭合区域线积分。整个算法在保持计算精度的前提下有较高的计算速度。     

Some Observational Evidence of Alfven Surface Waves Induced Magnetic Reconnection

The surface wave induced magnetic reconnection (SWIMR) model based on Alfven Resonance theory will be discussed briefly both for collisional and collisionless plasmas. It is shown that the spatial scales and time delays associated with Flux Transfer Events and Pulsed Ionospheric Flows, as observed by satellites and SuperDARN radars and the magnetic bubbles, observed at the high latitude boundary of the magnetopause, can be explained by the SWIMR model. This revised version was published online in August 2006 with corrections to the Cover Date.     

表面组装技术的应用与发展（下）

本文主要对表面组装技术的特点、表面组装工艺和表面组装技术的现状及发展趋势进行了全面的介绍，并分析了贴片机、网板印刷机、回流焊、波峰焊对表面组装工艺的影响。