低温技术在航天领域中的应用

文章从能量耗散、工作温度两个主要技术指标介绍了国外一些典型低温光子传感器;根据寿命、电能分配、质量和防振要求,提出在进行航天器低温系统设计时需要考虑的因素.文章还介绍了国外空间低温制冷机的发展状况、关键技术研究计划,以及进行空间探测的一些实验项目.     

火星大气来流模拟装置CFD仿真与试验

根据我国火星着陆巡视器工作过程,其着陆发动机需要在相对火星大气高速迎风运动中可靠点火。由于巡视器着陆时发动机喷管出口气流与火星稀薄气流方向相反,目前无法通过理论计算准确获得着陆过程的动态流场对发动机起动过程的影响量值。为验证火星着陆环境下发动机点火的适应性,需要建立发动机的火星大气来流试验环境模拟条件。为模拟发动机在火星大气条件下的相对运动,在真空舱内发动机保持固定,前端设置环形来流形成装置,该装置在发动机喷管周围形成一定速度的逆向来流包络。采用数值模拟技术结合试验验证方法,在火星着陆器巡视器主发动机性能考核试验中,针对来流的形成装置开展了设计研究工作。来流模拟试验测试数据表明:在确保贮箱供应压力稳定的条件下,来流模拟系统能够形成100~200 m/s速度的稳定来流,发动机在来流下能稳定启动工作,真空舱压力满足试验要求。     

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures (ECCM) scheme combating against deceptive electronic counter measure (ECM) techniques.An adaptive detector exploiting generalized likelihood ratio test (GRLT) criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform (FrFT) domain.First,the generating mechanism of spurious frequencies is analyzed based on the Volterra serial.The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second,a modified adaptive beamformer orthogonal rejection test (ABORT) like detector in closed form is built.The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data.This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality,which is essential for the ABORT detectors.The expansion to radar network is discussed as a special case at the final part of this paper.Numerical simulations demonstrate the effectiveness of the proposed method.     

基于微型光谱仪的光纤压力高速解调技术

为解决高超声速飞行器中大气压力传感系统的多通道、高精度、强环境适应性等技术需求问题,具有耐高温、易组网、高灵敏度、抗电磁干扰等优点的光纤压力传感技术成为航空航天压力传感领域的重要研究方向。提出一种基于微型光谱仪的光纤压力高速解调技术,该技术采用基于体相位光栅和线阵光电探测器的微型光谱仪作为光谱探测单元、Actel公司的片上SoC电路系统作为智能信息处理单元,融合数字滤波、线性拟合、曲线寻峰、信号重构等数据处理算法,完成光纤压力传感器高速解调系统研制,并搭建压力检测实验平台。试验结果表明:系统的压力测量范围优于260kPa,测量精度接近0.1%F.S.,分辨率为10Pa,动态响应可达5kHz。     

电磁悬浮微陀螺概述

微陀螺具有体积小、 功耗低等优点,但其精度目前仍然较低.在传统陀螺中,电磁悬浮陀螺的精度非常高,因此,对电磁悬浮微陀螺进行研究,有望获得高精度的微陀螺.介绍了电磁悬浮微陀螺的分类、 原理、 优缺点、 结构以及研究现状.首先根据悬浮原理将电磁悬浮微陀螺分为基于磁吸力的电磁悬浮微陀螺、 基于排斥力的电磁悬浮微陀螺、 静电悬浮微陀螺、反磁悬浮微陀螺和超导磁悬浮微陀螺;然后分别介绍了每种电磁悬浮的悬浮原理和优缺点,以及每种电磁悬浮微陀螺的发展现状、 样机结构和转子的悬浮旋转原理;最后,简述了电磁悬浮微陀螺的发展前景.     

A 3NM-64_He added to LARC for Solar Extreme Event studies during solar cycle 24

The Antarctic Laboratory for Cosmic Rays (LARC, acronym for Laboratorio Antartico per i Raggi Cosmici or Laboratorio Antártico para Rayos Cósmicos) operates on King George Island (South Shetlands). Since January 1991 a standard 6NM-64 detector has been recording continuous cosmic ray measurements and several Ground-Level Enhancements have been registered. Here we describe the different phases performed in Italy for the realization of a 3NM-64_³He detector, which started its measurements during the Italian XXII Antarctic Summer Campaign. Data recorded during solar activity cycle 24 will furnish an useful research tool for the next Solar Extreme Events.     

The radiation environment in the ISS-USLab measured by ALTEA: Spectra and relative nuclear abundances in the polar,equatorial and SAA regions

We present here the energy spectra relative to different geomagnetic regions as measured by the ALTEA (Anomalous Long Term Effects on Astronauts) detector in the International Space Station – USLab from August 2006 to July 2007.     

某型飞机座舱温度调节系统检测仪的研制

为满足某型飞机座舱温度调节系统原位检测的需要,结合外场实际．研制了该型飞机的座舱温度调节系统检测仪。经用户使用证明．该检测仪能够满足飞机的检测需要。     

超导重力仪器:机遇与挑战

超导重力仪器是利用超导电性构建的精密相对重力测量仪器,其工作于4.2K液氦温度,具有仪器固有噪声低、稳定性好的特点。阐述了超导重力仪和超导重力梯度仪两种仪器的工作原理与技术特征,简要介绍了作者所在课题组超导重力仪器研制的进展情况。分析了我国资源勘查用航空超导重力梯度仪研制所面临的机遇与挑战,提出了应对技术挑战的策略方法。     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.