NiAl基金属间化合物多晶和单晶合金的力学性能研究

研究了Ｎｉ５０Ａｌ３０Ｆｅ２０金属间化合物合金多晶和单晶室温下拉伸，Ｎｉ５０Ａｌ３０Ｆｅ２０和Ｎｉ５０Ａｌ４０Ｔｉ１０金属间化合物合金多晶和单晶在室温和高温下的压缩性能，以及表面镀镍处理对Ｎｉ５０Ａｌ４０Ｔｉ１０性能的影响。     

GRAIN STRUCTURE CONTROL OF NICKEL－BASE SUPERALLOYS IN CASTING PROCESS：EFFECT OF FOUNDRY VARIABLES

ＧＲＡＩＮＳＴＲＵＣＴＵＲＥＣＯＮＴＲＯＬＯＦＮＩＣＫＥＬ－ＢＡＳＥＳＵＰＥＲＡＬＬＯＹＳＩＮＣＡＳＴＩＮＧＰＲＯＣＥＳＳ：ＥＦＦＥＣＴＯＦＦＯＵＮＤＲＹＶＡＲＩＡＢＬＥＳＧＲＡＩＮＳＴＲＵＣＴＵＲＥＣＯＮＴＲＯＬＯＦＮＩＣＫＥＬ－ＢＡＳＥＳＵＰＥＲ...     

PEEK/ZrO2固体合金的探索研究

在聚醚醚酮(PEEK)玻璃化转变温度以下,用外动式高能旋转球磨机使PEEK和二氧化锆(ZrO₂)混合物反复变形、断裂和结合,并形成新的相,即形成PEEK/ZrO₂固体合金.通过扫描电镜(SEM)、差示扫描量热仪(DSC)、红外光谱(FT-IR)和动态热力学分析装置(DMTA)对PEEK/ZrO₂=1/2和2/1固体合金的结构及性能进行研究;并与纯PEEK对比,探讨PEEK与ZrO₂形成固体合金的可能性;讨论固体合金化工艺对PEEK/ZrO₂固体合金性能的影响,分析PEEK/ZrO₂固体合金的形成机理.     

GH150氩弧焊接头组织和力学不均匀性研究

研究了ＧＨ１５０合金对接氩弧焊接头显微组织和力学性能的不均匀性，用金相分析和微型剪切试验等方法得到了该焊接接头各区域的微观组织和力学性能分布特性。结果表明，该焊接接头中存在着比较严重的微观组织和力学性能不均匀性，其不均匀程度在熔合线附近最为严重。因而认为熔合区是该焊接接头力学性能最薄弱的部位。同时，由微型剪切试验所得到的力学性能梯度曲线还表明，ＧＨ１５０合金是一种高强度材料，其韧塑性却偏低；在焊接接头各区域中的强度指标变化不大，但是焊缝和热影响区的韧塑性比母材降低较多。其中，焊缝的剪切变形率降低２１．８％，剪切功降低２５．５％。     

TiAlB合金中初生TiB2的形貌及其形成机理

用原位自生法制备了Ti-53Al-xB合金,并用X射线衍射仪、扫描电镜对合金的相组成和微观组织进行了研究.结果表明:该合金主要由TiAl和TiB2两相组成;初生TiB2呈六面棱柱状,在TiAlB合金凝固过程中,Al原子富集在初生TiB2固-液界面前沿,导致固-液界面上B原子过饱和度不均匀性增加,使固-液界面变得不稳定, 从而在TiB2(0001)面上产生凸台或柱棒状分枝;分枝的各晶面取向与母体的取向一致,在初生TiB2(0001)面的凸台状或柱棒状分枝上能观察到清晰的台阶.     

Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools

Titanium alloys are widely used in aeronautics that demand a good combination of high strength, good corrosion resistance and low mass. The mechanical properties lead to challenges in machining operations such as high process temperature as well as rapidly increasing tool wear. The conventional tool materials are not able to maintain their hardness and other mechanical properties at higher cutting temperatures encountered in high speed machining. In this work, the new material tools, which are polycrystalline diamond (PCD) and polycrystalline cubic boron nitride (PCBN) tools, are used in high-speed milling of Ti-6.5Al-2Zr-1Mo-1V (TA15) alloy. The performance and wear mechanism of the tools are investigated. Compared to PCBN tool, PCD tool has a much longer tool life, especially at higher cutting speeds. Analyses based on the SEM and EDX suggest that attrition, adhesion and diffusion are the main wear mechanisms of PCD and PCBN tools in high-speed milling of TA15. Oxidation wear is also observed at PCBN tool/workpiece interface. Roughness, defects, micro-hardness and microstructure of the machined surface are investigated. The recorded surface roughness values with PCD/PCBN tools are bellow 0.3 μm at initial and steady cutting stage. Micro-hardness analysis shows that the machined surface hardening depth with PCD and PCBN tools is small. There is no evidence of sub-surface defects with PCD and PCBN tools. It is concluded that for TA15 alloy, high-speed milling can be carried out with PCD/PCBN tools.     

水下弹体空化流动的数值模拟

采用均质流模型对水下弹体的空化流动进行了数值模拟,控制方程的求解采用有限体积法,对流项采用迎风通量差分格式,时间步的推进则采用了LU-SGS隐式方法.使用质量传输模型模拟汽-液之间的质量转换.为了更好的计算低速流动,在计算中对对流项进行了预处理,并对质量传输源项进行了点隐式处理.对绕圆柱钝头体空化流动进行了模拟,雷诺数Re＝136 000,计算得到了圆柱形钝头体在空化数σ＝0.1,0.2,0.3时的壁面压力系数,并与试验结果进行了对比,符合良好.在此基础上研究了弹体带尾迹的超空化现象,空化数σ＝0.2,0.1,0.06,在σ＝0.06下得到了水下弹体的超空化尾迹.      

J7L 飞机小速度机动试飞初探

在飞行试验的基础上，依据实际飞行中的机载测试记录和飞行体会，分别介绍了Ｊ７Ｌ飞机在作超临界盘旋、跃升回转、尾冲和小速度斤斗四个高难度小速度机动动作时，各自的进入条件、驾驶技术要领、动作特点和需要注意的问题。可供从事过失速飞行试验、战术机动研究的技术人员和飞行人员参考。