A parameterized geometry design method for inward turning inlet compatible waverider

Intensive studies have been carried out on generations of waverider geometry and hypersonic inlet geometry. However, integration efforts of waverider and related air-intake system are restricted majorly around the X43A-like or conical flow field induced configuration, which adopts mainly the two-dimensional air-breathing technology and limits the judicious visions of developing new aerodynamic profiles for hypersonic designers. A novel design approach for integrating the inward turning inlet with the traditional parameterized waverider is proposed. The proposed method is an alternative means to produce a compatible configuration by linking the off-the-shelf results on both traditional waverider techniques and inward turning inlet techniques. A series of geometry generations and optimization solutions is proposed to enhance the lift-to-drag ratio. A quantitative but efficient aerodynamic performance evaluation approach （the hypersonic flow panel method） with lower computational cost is employed to play the role of objective function for opti- mization purpose. The produced geometry compatibility with a computational fluid dynamics （CFD） solver is also verified for detailed flow field investigation. Optimization results and other numerical validations are obtained for the feasibility demonstration of the proposed method.     

摆锤式冲击试验机能量损失检测方法的比较与分析

摆锤式冲击试验机的能量损失包括：指针的摩擦（或接触式电子角位移传感器的摩擦）、空气阻力和摆轴轴承的摩擦所引起的能量损失；基础的冲击、机架和摆锤的振动所引起的能量损失。国内外还没有成熟的测量方法和测量仪器测定基础的冲击、机架和摆锤的振动所引起的能量损失，没有形成技术文件，目前摆锤式冲击试验机能量损失的检测主要针对前者。本文针对国内计量部门计量摆锤式冲击试验机所依据的常用标准和规程，比较能量损失的检测方法和计算公式，做出简要分析，指出某些计算公式值得商榷之处。     

风扇出口导向叶片低噪声设计Ⅰ:方法与优化

作为"风扇出口导向叶片（Outlet Guide Vanes，OGV）低噪声设计"系列文章的第1篇，本文在现有压气机气动设计流程的基础上，加入了噪声评估过程，建立了基于通流设计的气动/声学一体化设计方法。为提高设计阶段的评估速度，以三维升力面理论与管道声学理论为基础，从通流设计和造型设计输出中提取参数，结合转子尾迹模型，建立了转/静干涉噪声的解析预测模型。以现代大涵道比涡扇发动机风扇/增压级为对象，采用该模型系统分析了OGV轴向掠形与周向倾斜对转/静干涉噪声的影响，获取了轴向掠形角与周向倾斜角等三维设计参数与风扇噪声的关系图谱，初步确定了低噪声设计较优降噪量的掠和倾组合方案。以此为基础，在保持叶尖子午投影位置和弦长不变的前提下，将叶片前缘和径向积叠进行参数化，采用遗传算法进一步开展了OGV的低噪声优化设计，最终获得了2个优化方案，预估的降噪量达到了8 dB。     

欧拉方程多段翼型绕流计算的嵌套网格方法

本文采用嵌合体埋入技术，将主段翼型和襟翼分成两子域，对多段翼型的复杂构型进行了分区迭代求解，在有限体体积离散的基础上，求解欧拉方程计算各子域流场的解，通过各流场的耦合迭代到多段翼型绕流的解，典型的带３０％襟翼ＧＡ（Ｗ）－１翼型算例表明，该计算方法稳定，能较地模拟多段翼型中主段翼型与襟翼交接处的复杂流动现象计算结果与实验值有较好的一致性。     

AHP中判断矩阵元素最优估计值的误差分析

在AHP模型中，请一组专家对某一属性进行评价，通过适当的数学处理方法，可得判断矩阵元素的最优估计值，并根据残差来确定所求估计值是否达到精度要求，若不符合精度要求则需返还给专家进行重新评估。这是AHP中构造判断矩阵的一种新方法。     

我国直升机外部噪声控制技术发展思路研究

直升机外部噪声控制技术是直升机技术发展的重要方向。对直升机外部噪声控制技术的现状及发展趋势进行了分析，基于我国直升机外部噪声控制的技术基础，从基础研究、主被动控制技术等方面提出了我国直升机外部噪声控制技术的发展思路。     

Effect of surface roughness on microwave brightness temperature from lunar surface: Numerical analysis with a hybrid method

A hybrid method, combining the radiative transfer theory and the method of moments (MoM), is proposed to study the potential effect of the lunar surface roughness on the microwave brightness temperature. The total upward emission reaching the lunar surface from below media is calculated by the radiative transfer theory, and then the brightness temperature is obtained by weighting the bidirectional transmission coefficients which is computed using the MoM. The method is validated by both flat and rough surface models with analytic solutions. With the hybrid method, brightness temperatures from simulated lunar model are calculated and compared to those from a flat layered model. The comparisons show that the effect of rough surface on brightness temperature cannot be ignored and also depends on many other factors, such as observation angle and polarizations. For vertical polarization, an optimal observation angle may exist to reduce the effect of surface roughness. These results indicate that the knowledge of lunar surface roughness is important in microwave remote sensing to the Moon and may probably provide a guide to lunar projects in future.     

A new inversion method of plasma density distribution of plasmasphere in the geomagnetic equatorial plane from IMAGE data

The plasma density distribution of plasmasphere in the geomagnetic equatorial plane can help us study the magnetosphere like plasmasphere, ionosphere and their kinetics. In this paper, we introduce a new inversion method, GE-ART, to calculate the plasma density distribution in the geomagnetic equatorial plane from the Extreme Ultraviolet (EUV) data of IMAGE satellite under the assumption that the plasma density is constant along each geomagnetic field line. The new GE-ART algorithm was derived from the traditional Algebraic Reconstruction Techniques (ART) in Computed Tomography (CT) which was different from the several existing methods. In this new method, each value of the EUV image data was back-projected evenly to the geomagnetic field lines intersected by this EUV sight. A 3-D inversion matrix was produced by the contributions of all the voxels contained in the plasmasphere covered by the EUV sensor. That is, we considered that each value of the EUV image data was relative to the plasma densities of all the voxels passed through by the corresponding EUV radiation, which is the biggest difference to all the existing inversion methods. Finally, the GE-ART algorithm was evaluated by the real EUV data from the IMAGE satellite.     

一种红外焦平面阵列相对光谱响应自动测试系统

目前测试红外焦平面阵列相对光谱响应参数时，需要人工测量波段中每个波长点的光谱响应，针对测试过程繁琐和测试时间长的问题，在基于现有的不同开发平台开发的单色仪和数据采集系统的基础上，利用动态链接库技术，研制了一种红外焦平面阵列相对光谱响应自动测试系统，该系统测试过程简化，自动化程度提高。经过对比分析，自动测试与人工测试结果具有较好的一致性，自动测试比人工测试更加可靠。     

导流板对埋入式进气口进气的影响

埋入式进气口是一种新型的动力装置舱冷却进气方式,传统的流量测量方式难以应用于该型进气口,因此需要借助数值仿真手段对该型进气口的进气性能进行研究。某航空动力装置舱分别采用了2种带格栅的埋入式进气口,其不同在于是否存在内侧导流板。以该型埋入式进气口为研究对象,按1∶1的比例建立三维进气口模型,借助CFD数值仿真软件,对比了导流板对埋入式进气口进气的影响,以及两种进气口的进气规律,其结论为埋入式进气口的优化设计提供参考。