Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates

The main purpose of the present work is to experimentally and numerically study why and how the magnitude of the bolt clamping force reduces in the aerospace structural bolted plates when they are subjected to a longitudinal tensile load. In the experimental method, a holed plate of aluminium alloy 7075-T6 was clamped using a single bolt fastener, and then tested under an increasing static longitudinal tensile load. The bolt clamping magnitude was determined by using the measured axial compressive strains of a steel bush placed between the nut and plate. Two clamped specimens with different initial clamping forces were studied. In each specimen the actual clamping forces were determined during the longitudinal loading on the plate. In the numerical method, a three-dimensional (3D) finite element model was generated in order to simulate and quantify the bolt clamping force in the plate model loaded in tension. Both experimental and numerical results showed that the clamping force reduces considerably in the aluminium bolted plates under the longitudinal tensile loading. This is because of the transverse contraction of the plate material that causes the clamped material to release from the initial compression, and as a result, the clamping force to relax.     

竖直平板间湍流自然对流中螺旋羽流结构的实验研究

应用粒子图像测速技术（PIV）对竖直平板间水的温差湍流自然对流的流场进行了测量,并由测量所获得的速度场获取了涡量分布和散度分布。测量结果表明,在流场中的竖直展向截面和水平流向截面上都存在大尺度涡流结构,而且在部分涡量集中区域同时具有正的或者负的散度集中,速度矢量分布也表明水平截面上的这部分涡流结构呈现着清晰的源或汇的特征。这些现象都表明这部分旋转着的流体不但有切向速度,还有径向速度。这意味着这部分流体在旋转的同时也有向上或向下的运动,即同时具有在同方向上的涡量和速度,即螺度,而这是螺旋羽流结构的特征。这些涡结构,尤其是水平流向截面上具有径向速度的涡流结构的存在证实了竖直平板之间的湍流自然对流流场中大尺度的螺旋羽流结构的存在。     

多层黏弹性复合材料结构阻尼性能优化设计

针对多层黏弹性复合材料结构阻尼性能设计优化问题,运用能量法既考虑其面内应变能,又考虑其横向剪切应变能,建立其损耗因子的计算模型,并用实验方法验证其挠度函数的可行性.然后以多层黏弹性复合材料结构的损耗因子最大化为优化目标,用改进遗传算法对其阻尼性能进行单变量和多变量优化设计.数值结果表明,应用遗传算法优化设计多层黏弹性复...     

FATIGUE DAMAGE AND LIFETIME PREDICTION OF AERONAUTIC WELDED STRUCTURES UNDER HIGH TEMPERATURE

ＦＡＴＩＧＵＥＤＡＭＡＧＥＡＮＤＬＩＦＥＴＩＭＥＰＲＥＤＩＣＴＩＯＮＯＦＡＥＲＯＮＡＵＴＩＣＷＥＬＤＥＤＳＴＲＵＣＴＵＲＥＳＵＮＤＥＲＨＩＧＨＴＥＭＰＥＲＡＴＵＲＥＺｕｏＪｉａｎｚｈｅｎｇ，ＬｏｕＺｈｉｗｅｎ，ＫｕａｎｇＺｈｅｎｂａｎｇ（ＳｔａｔｅＫ...     

交叉剪切混合层中拟序结构的数值研究

采用拟谱方法对时间模式的交叉剪切混合层进行了直接数值模拟。计算结果表明:与平面混合层一样,展向涡的拉伸作用是交叉剪切混合层中流向涡形成的主要机制。当展向剪切强度较大时(如两主流交叉角为40°),与初期展向KelvinHelmholtz相关的单向旋转流向涡在拉伸作用下很快增长起来,并“坍缩”成“肋状”涡。当交叉角为40°时,涡核区存在类似平面混合层中“方块状”涡的流向涡结构,展向涡辫区还存在一组符号相反的流向涡,不过与“肋状”涡对应的涡结构呈扁平状,始终没有“坍缩”。当交叉角为60°时,“肋状”涡非常强,以致完全抑制了平面混合层“对称模式”的发展。当交叉角小到20°时,流向涡结构更接近于对称分布,然而“肋状”涡却没有形成。另外,计算结果还证实:与二维混合层相比,大强度展向剪切的引入能够加强流场的混合,同时,适当增加展向扰动波初始强度和波数也是提高混合效率的有效手段。     

飞机结构件在当量环境谱下加速腐蚀试验和日历寿命估算方法

首次成功地进行了构件在当量环境谱下的加速腐蚀试验,取得了防护层日历有效期和基体腐蚀扩展速率;建立了一套由试验数据估算日历首翻期、日历翻修间隔、日历总寿命的方法和公式;提出了由使用中真实的腐蚀损伤数据来估算日历首翻期的方法;在构件加速腐蚀试验和使用中真实腐蚀损伤数据统计处理的基础上,给出了 HX型机群日历寿命。     

沟槽面湍流边界层近壁区拟序结构实验研究

应用氢气泡流动显示技术,对沟槽面湍流边界层近壁区带条结构进行了研究。通过分析流动显示结果,发现沟槽面的带条比较平坦,低速带条有较好的直线性,说明沟槽限制了流体的横向流动,增强了流动的稳定性。通过统计分析发现沟槽板湍流边界层中无量纲低速带条间距及无量纲高速带条间距均符合对数正态分布。对同种沟槽板而言,两种带条的分布特性无明显差别。沟槽板的平均无量纲低速带条间距比光滑板的要小,最多小30%,且沟槽尺寸对平均无量纲低速带条间距亦有影响。对同一种沟槽板同一位置而言,平均无量纲低速带条间距随离开壁面的无量纲距离的减小而减小,但最可几概率增大,表明沟槽板对近壁流动影响最为强烈。另外,还对低速带条与减阻特性的关系做了初步探讨,得到的沟槽无量纲高度和间距为15～18的沟槽板有较好的减阻效果。     

Statistical study of radio drifting pulsation structures with associated CMEs and other observations

Solar radio burst, especially the fine structures (FSs) and the drifting pulsation structures (DPSs), may be used as an important diagnostics tool to draw the evolution map of the flare loop in the initial phase of solar flares. In this work, 52 radio events were found accompanying with DPSs. They were all observed with the Solar Radio Spectrometers (0.625–7.6 GHz) of China during 1998–2004. Combining the radio observations with LASCO-C2, Goes-8 SXR, H_α, EUV and Trace observations, we analyzed all these events and obtained some statistic conclusions: First, 88% DPSs take place at the initial phase of the radio burst, and their rich spectrum characteristics are helpful to understand the events further. Second, 83% DPSs are associated with CMEs or ejection events, and all the events are accompanied by Goes SXR flare. Third, for CMEs and DPSs, which take the first step, there is no significant predominance of either of them. The relationship between the DPSs and CMEs is still not clear in this study because of the lack of spatial resolution in the centimeter–decimeter band. However, the EIT or Trace ejection happened during the onset/end time of DPSs. They are signatures of the initial phase of CMEs. Two events will be illustrated to explain this.     

空间站充气式下载系统的概念研究

空间站充气式下载系统 (IDS)是在俄罗斯充气式再入与降落技术 (IRDT)基础上发展起来的一种新概念航天回收技术。详细介绍了IDS基本概念和工作原理 ,通过与传统降落伞回收方式的比较 ,总结了该技术的特点。讨论了该技术对结构、轨道、气动力、气动热、热防护层等关键子系统的设计需求。归纳了国外研究现状及发展趋势 ,分析了航天和军事领域的应用前景。     

Design of aircraft structures against threat of bird strikes

In this paper, a method to design bird-strike-resistant aircraft structures is presented and illustrated through examples. The focus is on bird strike experiments and simulations. The explicit finite element software PAM-CRASH is employed to conduct bird strike simulations, and a coupled Smooth Particles Hydrodynamic (SPH) and Finite Element (FE) method is used to simulate the interaction between a bird and a target structure. The SPH method is explained, and an SPH bird model is established. Constitutive models for various structural materials, such as aluminum alloys, composite materials, honeycomb, and foam materials that are used in aircraft structures, are presented, and model parameters are identified by conducting various material tests. Good agreements between simulation results and experimental data suggest that the numerical model is capable of predicting the dynamic responses of various aircraft structures under a bird strike, and numerical simulation can be used as a tool to design bird-strike-resistant aircraft structures.