Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

空间低温杜瓦瓶凯夫拉支撑结构多约束优化设计

采用新型凯夫拉纤维作为某空间用小型低温杜瓦瓶的支撑材料，在验证其力学性能的基础上，设计了杜瓦瓶的支撑结构，建立了一种新的热力学耦合优化模型，给出支撑结构固有频率、热应力及发射环境下的约束条件，通过一种“离散点加密”新约束优化法计算出了支撑结构满足约束条件范围内的要求的最优设计参数。     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

Stability of relative equilibria of the full spacecraft dynamics around an asteroid with orbit–attitude coupling

The full dynamics of spacecraft around an asteroid, in which the spacecraft is considered as a rigid body and the gravitational orbit–attitude coupling is taken into account, is of great value and interest in the precise theories of the motion. The spectral stability of the classical relative equilibria of the full spacecraft dynamics around an asteroid is studied with the method of geometric mechanics. The stability conditions are given explicitly based on the characteristic equation of the linear system matrix. It is found that the linearized system decouples into two entirely independent subsystems, which correspond to the motions within and outside the equatorial plane of the asteroid respectively. The system parameters are divided into three groups that describe the traditional stationary orbit stability, the significance of the orbit–attitude coupling and the mass distribution of the spacecraft respectively. The spectral stability of the relative equilibria is investigated numerically with respect to the three groups of system parameters. The relations between the full spacecraft dynamics and the traditional spacecraft dynamics, as well as the effect of the orbit–attitude coupling, are assessed. We find that when the orbit–attitude coupling is strong, the mass distribution of the spacecraft dominates the stability of the relative equilibria; whereas when the orbit–attitude coupling is weak, both the mass distribution and the traditional stationary orbit stability have significant effects on the stability. We also give a criterion to determine whether the orbit–attitude coupling needs to be considered.     

加筋壁板大开口结构稳定性分析及试验验证

为了研究加筋壁板大开口结构的压缩承载极限问题,规划了两组具有不同设计参数的试验件进行了静力试验,并同时采用了线性特征值法以及非线性的弧长法对其压缩极限进行了对比分析。在采用弧长法分析时,引入了模态扰动技术,而且考虑了材料的弹塑性性质。计算结果与试验的对比表明:针对复杂结构稳定性问题,屈曲特征值法具有较大局限性,而结合模态扰动的弧长法对这种复杂的加筋壁板类结构压缩极限的分析精度较好。通过分析给出了加筋壁板大开口结构设计的一些建议。     

失效概率矩独立全局灵敏度分析的高效算法

失效概率矩独立全局灵敏度分析对指导可靠性优化至关重要，本文从乘法降维及Edgeworth级数展开的角度提出一种失效概率矩独立全局灵敏度指标分析的高效算法。所提算法通过Edgeworth级数展开将失效概率矩独立全局灵敏度指标的求解转化为输出无条件及条件前四阶整数矩的求解。对于输出的无条件及条件四阶矩的计算，基于乘法降维的思想，本文推导了重复利用计算输出的无条件矩的输入输出样本来计算条件矩以及外层关于输入变量一维积分的计算公式，使得仅需重复利用输出无条件前四阶矩求解产生的积分网格内的数据即可同时求得输出的前四阶条件矩以及外层关于输入变量的一维积分。所提算法大大提高了失效概率矩独立全局灵敏度的分析效率。航空发动机涡轮盘以及汽车前轴的分析结果验证了所提算法的高效性及准确性。     

基于动网格技术的飞机舱弹分离过程 CFD/ RBD耦合数值仿真

飞机舱弹分离瞬间特性严重影响导弹/炸弹的打击精度。采用计算流体动力学(CFD)和刚体动力学(RBD)模型耦合求解的数值仿真方法,应用网格弹性光顺和局部重构相结合的动网格技术,有效地避免了刚体运动而引起的网格畸变,仿真计算了炸弹舱弹分离后俯仰角度变化过程 .仿真结果表明,舱弹分离时向炸弹施加 1个合适的抛 射力矩,有助于炸弹在下降过程中快速地调整其打击姿态。     

基于自由型曲面的贴体网格生成

本文建立了基于自由型曲面的曲面网格生成的数学模型,生成了曲面网格,把它作为三维Ｄｉｒｉｃｈｌｅｔ问题的边界条件,求解三维Ｐｏｉｓｓｏｎ方程,获得了满足数值模拟要求的三维贴体网格。采用上述方法,完成了基于自由型曲面的某直升机调座舱三维贴体网格的生成,结果令人满意。     

复合材料薄壁梁扭转的高次翘曲理论

利用翘曲连续修正概念导出表示剖面翘曲位移的形函数序列,据此建立单闭室复合材料薄壁梁扭转分析的高次翘曲理论,并结合分层的具体情况,考察分层对复合材料薄壁梁扭转翘曲的影响。算例表明,该高次翘曲理论具有很好的收敛性。