Detonation engine fed by acetylene–oxygen mixture

The advantages of a constant volume combustion cycle as compared to constant pressure combustion in terms of thermodynamic efficiency has focused the search for advanced propulsion on detonation engines. Detonation of acetylene mixed with oxygen in various proportions is studied using mathematical modeling. Simplified kinetics of acetylene burning includes 11 reactions with 9 components. Deflagration to detonation transition (DDT) is obtained in a cylindrical tube with a section of obstacles modeling a Shchelkin spiral; the DDT takes place in this section for a wide range of initial mixture compositions. A modified ka-omega turbulence model is used to simulate flame acceleration in the Shchelkin spiral section of the system. The results of numerical simulations were compared with experiments, which had been performed in the same size detonation chamber and turbulent spiral ring section, and with theoretical data on the Chapman–Jouguet detonation parameters.     

基于一致性预处理技术的作业车间调度算法研究

为降低CSP调度算法的计算复杂度和减少搜索过程中回溯发生概率,采用一致性预处理技术来预先修剪和过滤搜索空间。仿真实验证明:两种方法的综合运用可以显著提高CSP调度算法的搜索效率,从而为CSP调度算法求解大规模作业车间调度问题提供可能。     

一种用于ACSR的主从机并行处理系统

以微机、ＬＨ－ＳＣ１６Ａ型Ａ／Ｄ板、ＳＣ５０型Ｄ／Ａ板以及ＴＭＳ３２０Ｃ３０Ａ型ＤＳＰ板为基础，建立了时域结构响应主动控制的主从机并行处理系统。这一系统具有多通道快速运算能力，可提高控制系统的控制律，更新速率，改善控制系统的跟踪能力。     

管理效率、技术进步与生产率增长——基于中美航空公司的比较

运用Malmquist生产率指数方法，对中美15个航空公司2000～2006年期间的全要素生产率的变化作了测算与对比。分析结果显示，2000—2006年这些公司的生产效率总体上都有所提高，中国航空公司的全要素生产率的平均增长率为4.3％，美国的平均增长率为6．1％；综合效率改善与技术进步对中美两国航空公司生产率的影响程度并不相同，美国航空公司的主要驱动因素为技术变革与创新，中国航空公司的发展动力主要为对已有技术的运用以及组织管理效率的提升。中国航空公司全要素生产率水平的提高，除继续强调综合效率的重要性之外，也要进一步加强对技术进步的重视。     

结构特征参数对发动机支点同心度的影响研究

航空发动机静子支点作为转子的支撑部位,由于制造工艺、装配误差和长时间工作的影响,较易出现支点不同心的现象。基于形状和位置公差理论,建立了一种发动机支点同心度的计算模型,并对某发动机的支点同心度分布进行了仿真计算。通过分析影响支点同心度的关键结构参数和测量支点同心度试验,提出了同心度的控制方法。结果表明:采用本文所述理论计算和控制方法,可准确地判断出发动机支点同心度是否符合标准,以便有针对性地选择调整措施,进而提高了发动机的装配质量,有效避免转、静子不同轴引起的碰摩问题,减小了发动机整机振动出现的几率。     

EXPERIMENT RESEARCH ON DYNAMIC LOAD IDENTIFICATION TECHNOLOGY BASED ON GENERALIZED ORTHOGONAL POLYNOMIAL THEORY (GOPT)

Dynamicloadisoneoftheimportantoriginalparametersinstructuraldynamicanalysis.Ithasobviousinfluencestodynamicsdesign,vibrationcontrols,activecontroltechnologyandsoon.Sincel97O,manyresearchitemsinthisfieldhavebeenaccomplishedintheworld-Sometheoriesandexperimentalmethodsofdynamicloadidentificationhadbeencreatedinfrequencydomain[l'2J-Howeverftherearesomedisadvantagesthattheycouldbeadaptedonlytoidenti-fythesteady-stateloadandnottoidentifythetransientload,suchasshockloadwithshortsampling.Forvarious…     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

Assessment of between-floor structural and topological properties on cognitive map development in multilevel built environments

The present study investigated cognitive map development in multilevel built environments. Three experiments were conducted in complex virtual buildings to examine the effects of five between-floor structural factors that may impede the accuracy of humans’ ability to build multilevel cognitive maps. Results from Experiments 1 and 2 (of three experiments) revealed that difficulties in developing multilevel cognitive maps are not solely caused by the z-axis offset, as is suggested in the literature, but are due to the factorial combination of a between-floor overlap and a z-axis offset. Results from Experiment 2 showed that this process becomes substantially more difficult when the reference directions between different floors have an angular offset from each other. Finally, results from Experiment 3 demonstrated that confusing between-floor heading shifts in aligned buildings did not make it reliably harder to build multilevel cognitive maps. The implications of these findings are discussed in terms of theories of mental representations in multilayered three-dimensional spaces, as well as for architectural design.     

新型航空发动机空气冷却器流动传热性能试验

空气冷却器是航空发动机中空气热量交换的重要场所,针对传统扰动结构强化换热不足问题,重点研究了空气冷却器 中扰动结构的结构形貌特征与流动换热的关系。以三周期极小曲面结构为基础,设计制造了D型极小曲面扰动结构、P型极小曲 面扰动结构和基于Sigmoid函数杂化方法的D-P型（P-D型）结构。并利用纳米CT重构出样品的3维数字特征,试验研究了不同结 构来流速度与压降、换热性能和综合换热性能的关系。结果表明：D型极小曲面结构具有最优的压降、换热性能和综合换热性能： D-P型杂化极小曲面结构的阻力系数f最大,比D型结构的高56.81%;D型的平均努塞尔数Nu比P型的高18.49%,P-D和D-P杂 化结构的换热性能比P型结构的有效提高;P-D型D-P型杂化结构的Nu分别比P型结构的高2%和8.27%。在4种结构中,D型结 构的综合换热性能最优,分别比P型、P-D型、D-P型结构的高40.35%、57.2%、71.02%。