增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。     

Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.     

测量质量工程技术在计量管理中的应用

测量质量工程技术是日本著名质量工程学专家田口玄一博士创立的一门新的工程技术(也称田口方法)在测量领域中的具体应用.它对提高计量管理水平,促进企业经济效益是非常有益的.本文着重介绍了这一新技术运用到计量管理中的几项突出表现.     

高超声速流的电子束诊断法(英文)

本文描述用电子束辉光法测量高超声速流中平均密度、速度以及密度变化特征的物理原理和过程。对此法用于平板上激波层稳定性问题的适用范围和限制条件作了分析。内容通过风洞实验结果加以说明。     

活塞裙部外圆复杂型面在位检测及其误差修正

提出了一种基于Windows环境下的活塞裙部外圆复杂型面在位检测的新方法,并设计了在位检测的软、硬件系统.同时,根据活塞裙部型面的特点,在现有常用误差处理算法的基础上进行了改进,新的误差处理方法具有更强的适用性.     

干涉测长中测量湿度的一种新方法

介绍了一种通过测量相对湿度和空气温度来计算湿度值的方法，并推导了计算公式。     

激光干涉正弦法小角度测量中有关问题探讨

分析了小角度正弦激光干涉仪的有关特性，叙述了这种方法的测量原理，计算了几种因素对测量准确度的影响，指出提高测量准确度的解决办法。     

卫星测控雷达校飞设备在飞机上的安装

介绍了某型卫星测控雷达的校飞设备以及这些设备在某型飞机上的安装方案，并对方案进行了分析，确保方案的可行性。     

Three dimensional investigation of the shock train structure in a convergent–divergent nozzle

Three-dimensional computational fluid dynamics analyses have been employed to study the compressible and turbulent flow of the shock train in a convergent–divergent nozzle. The primary goal is to determine the behavior, location, and number of shocks. In this context, full multi-grid initialization, Reynolds stress turbulence model (RSM), and the grid adaption techniques in the Fluent software are utilized under the 3D investigation. The results showed that RSM solution matches with the experimental data suitably. The effects of applying heat generation sources and changing inlet flow total temperature have been investigated. Our simulations showed that changes in the heat generation rate and total temperature of the intake flow influence on the starting point of shock, shock strength, minimum pressure, as well as the maximum flow Mach number.     

Aero-thermo-elastic Numerical Calculation and Analysis of Spinning Rocket

The application of computational fluid dynamics/computational solid method （CFD/CSM） on solving the aero-thermo-elastic problem of spinning rocket is introduced. Firstly, the aerodynamic coefficients of a rocket are calculated, and the results are compared with the available experimental data, which verified the accuracy of the CFD output. Then, analysis is carried using ANSYS Workbench multi-physics coupling platform, which includes fluid, thermal, and structural solvers. The results show that spinning causes a significant effect on the de formations and stresses. Furthermore, thermal stresses due to high temperature at the rocket warhead and tail edges have a dominated effect, even more than those produced by aerodynamic forces. Consequently, this important outcome should be taken into consideration during the rocket design stages.