The effect of geocenter motion on Jason-2 orbits and the mean sea level

We compute a series of Jason-2 GPS and SLR/DORIS-based orbits using ITRF2005 and the std0905 standards ( Lemoine et al., 2010). Our GPS and SLR/DORIS orbit data sets span a period of 2 years from cycle 3 (July 2008) to cycle 74 (July 2010). We extract the Jason-2 orbit frame translational parameters per cycle by the means of a Helmert transformation between a set of reference orbits and a set of test orbits. We compare the annual terms of these time-series to the annual terms of two different geocenter motion models where biases and trends have been removed. Subsequently, we include the annual terms of the modeled geocenter motion as a degree-1 loading displacement correction to the GPS and SLR/DORIS tracking network of the POD process. Although the annual geocenter motion correction would reflect a stationary signal in time, under ideal conditions, the whole geocenter motion is a non-stationary process that includes secular trends. Our results suggest that our GSFC Jason-2 GPS-based orbits are closely tied to the center of mass (CM) of the Earth consistent with our current force modeling, whereas GSFC’s SLR/DORIS-based orbits are tied to the origin of ITRF2005, which is the center of figure (CF) for sub-secular scales. We quantify the GPS and SLR/DORIS orbit centering and how this impacts the orbit radial error over the globe, which is assimilated into mean sea level (MSL) error, from the omission of the annual term of the geocenter correction. We find that for the SLR/DORIS std0905 orbits, currently used by the oceanographic community, only the negligence of the annual term of the geocenter motion correction results in a – 4.67 ± 3.40 mm error in the Z-component of the orbit frame which creates 1.06 ± 2.66 mm of systematic error in the MSL estimates, mainly due to the uneven distribution of the oceans between the North and South hemisphere.     

温度翘曲应力对机场刚性道面寿命的影响

分析了目前中国民航机场刚性道面的设计过程,指出在设计过程中忽视温度应力的影响不合理。参照公路水泥混凝土路面温度应力计算方法并根据Miner定律研究了温度翘曲疲劳损耗对于机场刚性道面影响规律,即温度翘曲疲劳损耗随板厚、地基反应模量的增大而增大,随着混凝土设计强度的增加而降低。然后提出采用设计寿命的影响因子nt/Nt评价温度翘曲疲劳损耗对于机场刚性道面设计寿命影响的方法并提供了相应的机场刚性道面板厚度设计流程图。最后提供了一个考虑温度翘曲应力的刚性道面设计实例,为工程应用提供参考。     

水平表面气流剪切作用下的水膜厚度

飞机结冰表面上的液态水受气流吹拂作用会发生向后溢流,从而影响结冰区域范围及防冰系统设计;为了获得水膜流动规律,对水平平板表面上气流剪切驱动的水膜流动进行了实验测量和建模分析。通过水膜流动风洞试验台产生高速气流驱动水膜的流动,使用色散共焦位移计测量同一位置的水膜在不同时刻的厚度变化,结果表明气-液界面由底层薄水膜和多种尺度的波动组成,具有变化速度快随机性强的特点。通过水膜厚度随气流速度及水膜雷诺数的变化规律,发现平均水膜厚度与两者均呈现出单调非线性的依赖关系。基于薄水膜流动理论和平均水膜厚度实验结果,提出了高速气流剪切作用下的气-液波动界面剪切因子计算式,适用于风速17.8~52.2m/s,水膜雷诺数26~128之间的平板水膜流动计算。     

系级教学档案管理模式研究

系级教学档案有自身的特殊性，并且形式多种多样。通过对系级教学档案的类型分析，坚持科学的系级教学档案整理工作的原则，才能高效完成系级教学档案的管理工作。     

Risk-taking during wayfinding is modulated by external stressors and personality traits

ABSTRACT

Two experiments examined cue reliance and risk-taking during desktop virtual wayfinding, and how they might be modulated by personality traits and external stressors. Participants navigated a series of virtual buildings and we manipulated the strength of probabilistic cues available to guide turn decisions. Navigators frequently discounted probabilistic cues and instead took risks, particularly when costs were low and potential benefits were high. Risk-taking was predicted by higher sense of direction and lower need for structure. Introducing a time stressor lowered risk-taking, with a higher relative reliance on probability-based information. This was most pronounced in females and those with a high need for structure. Results provide novel evidence that spatial cue reliance is modulated by individual differences and contextual constraints.     

高压金属软管应力及参数敏感度分析

某型号发动机热试车考核中高压金属软管多次出现破坏。通过建立软管有限元模型,采用非线性有限元分析了软管应力分布和各部分承载特点,判断波峰处轴向应力是影响软管结构强度的主要因素,有限元计算结果和试验破坏部位一致,表明有限元模型的合理性。在此基础上,通过参数化建模、设计中心复合实验和进行参数敏感度分析,得出影响波峰处最大轴向应力的敏感参数,为结构参数优化提供了依据。     

组合式压型模寿命显著提高的研究

本文提出了组合式套装模具使用寿命提高的机制 ,着重指出了预紧压力及过盈量数值的范围 ,介绍了黄铜弹药筒零件挤压成型时模具的结构及有关工艺     

二元推力矢量喷管导流管的设计研究

针对某型飞机进行二元推力矢量改装时对发动机出口的气流进行过渡转换的问题，设计了喷管导流管，将导流管气流截面由圆形过渡到长方形。本文利用有限元软件PATRAN对导流管进行了应力强度分析和变形分析，得出导流管的应力分布场和变形位移场，通过对不同厚度的导流管的分析计算得出导流管最大应力和最大位移随管壁厚度变化曲线，从而确定最佳的管壁厚度。研究了导流管最大应力和最大位移沿轴向的变化曲线，并对导流管的结构进行了优化设计，给出两种优化设计方案，得到较为理想的结构。     

ANALYSIS OF SHEAR STRESS DISTRIBUTION IN HONEYCOMB AIRCRAFT WING STRUCTURE SUBJECTED TO (S.T.) TORQUE

ＡＮＡＬＹＳＩＳＯＦＳＨＥＡＲＳＴＲＥＳＳＤＩＳＴＲＩＢＵＴＩＯＮＩＮＨＯＮＥＹＣＯＭＢＡＩＲＣＲＡＦＴＷＩＮＧＳＴＲＵＣＴＵＲＥＳＵＢＪＥＣＴＥＤＴＯ（Ｓ．Ｔ．）ＴＯＲＱＵＥＫｈａｌｉｄＭ．Ｔａｈｉｒ，ＺｈａｎｇＸｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＦ...