Corrosion Inhibition of SiC_p/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment

This article studies the effects of the CeCl₃ concentrations in conversion solutions with and without addition of NaCl, pH-values of conversion solution, drying temperature, time and temperature of immersion on the Ce-conversion coatings for corrosion protection of the SiC_p/5A06 Al-MMC and 5A06 Al-alloy in the 3.5% NaCl aqueous solution at room temperature. Potentiodynamic polarization tests reveal that the Ce-conversion treatment could markedly improve the pitting corrosion resistance of the composite and the matrix alloy in chloride containing environment. The best corrosion resistance effects are obtained for the samples treatment in 1‰ CeCl₃·7H₂O/ 3.5% NaCl solution at 45 °C for 60 min, followed by drying at 100 °C for 30 min. Examinations by means of scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) indicate that this behavior is due to the precipitation of Ce-oxides/hydroxides on the cathodic intermetallics and the Al-oxide film on the rest of the metal matrix.     

原位合成TiB2/6351复合材料热压缩变形特性

采用Gleeble-1500D热模拟试验机对原位合成TiB2(质量分数,8%)/6351复合材料在不同变形温度和不同应变速率条件下的热变形特性进行了研究,利用透射电镜(TEM)和光学显微镜分析了压缩后试样的微观组织.结果表明, 材料的流变应力随变形温度的升高而降低,随应变速率的提高而增大;材料的流变行为主要表现为加工硬化、动态回复和动态再结晶;相应的显微组织特征为:位错网络、混乱的位错团和胞状结构,亚晶及等轴晶.在应变速率和变形温度均较低时,增强体颗粒周围的基体中形成高密度位错区,但随变形温度的升高而减少;在应变速率较高时,增强体颗粒和基体的界面处开裂甚至增强体颗粒本身发生破碎.     

加载速率对层间断裂韧性的影响

虽然加载速率对层间断裂的影响已经被广泛的研究,但是现有的研究结果还未能给出加载速率对层间断裂韧性影响的明确趋势。研究人员发展了许多测量层合板复合材料以及胶接层断裂韧性的实验方法。本文的主要目的是对层间断裂韧性测量的实验方法进行综述,尤其是准静态和动态加载条件下层间起裂韧性的测量。首先介绍了准静态下Ⅰ型、Ⅱ型以及Ⅰ/Ⅱ复合型层间断裂韧性的测量方法,然后综述动态加载下层间断裂韧性的实验方法。前两部分着重介绍断裂实验中断裂参数(载荷、位移、起裂时间以及裂纹长度)的测量以及断裂韧性的计算。之后又综述了两种光学测量方法在层间断裂实验中的应用。最后将文献中加载速率对层间断裂韧性影响的实验研究结果进行了总结。     

Effects of sintering temperature and time on defect evolution and compression properties of Ti-Al3Ti laminated composites

For metal-intermetallic laminated composites, various types of defects often occur during the preparation process. This paper studied the evolution and formation mechanism of defects,such as pores, tunnel cracks, and delamination cracks in Ti-Al₃Ti laminated composites prepared by vacuum hot-pressing method. Moreover, quasi-static and dynamic compression tests were performed to study the effects of pores and delamination cracks on the compression properties of the composites. The resu...     

三维四向编织复合材料弹性性能的有限元预报

在四步法方型三维编织复合材料细观结构单胞模型的基础上,假设纱线具有六边形横截面,应用ANSYS软件,建立了实体有限元模型,该模型表面与预制件表面平行,更加符合三维编织复合材料的实际结构,且有利于力学性能的分析,同时,该模型中还考虑了织物的编织角与内部编织角的几何关系.基于该模型,计算了材料的弹性常数,分析了编织角和纤维体积含量对弹性常数的影响规律.结果表明,数值计算与实验结果吻合较好.此外,还确定了材料内部的应力场分布,为材料的强度预测奠定了基础.      

三维角联锁机织复合材料剪切性能有限元分析

使用三维绘图软件Pro/E 5.0构建出一种三层角联锁机织复合材料的细观结构模型,借助有限元软件ANSYS对复合材料在剪切力作用下纤维与树脂的应力、应变分布进行数值模拟,并借此分析该复合材料在剪切作用下的力学行为,并预测复合材料破坏模式。结果表明:复合材料在剪切力作用下发生沿剪切力方向程度较均匀的剪切变形;纤维相对于树脂承受更多剪切力作用,产生更大应力,但发生相对较小的应变;纤维中轴向与剪切力方向平行的经纱相对轴向垂直于剪切力的纬纱表现出更大的应力和应变。     

一种梁板复合结构的设计

对某卫星主结构中应用的一种新型的复合材料结构形式——梁板复合结构进行了设计、分析与试验。首先通过整星分析,设计了梁板复合结构,并为其设计了试验件进行研制试验。同时,利用有限元软件PATRAN和NASTRAN建立了三种模型:二维板壳模型、三维板壳模型和三维实体模型,通过比较试验结果与分析结果,修正了分析模型,并找出了合理的分析方法。试验结果表明,设计的梁板复合结构满足了既定的强度要求。     

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Particle-tool interactions, which govern the synergetic deformation of SiC particle reinforced Al matrix composites under mechanical machining, strongly depend on the geometry of particle position residing on cutting path. In the present work, we investigate the influence of cutting path on the machinability of a SiCp/Al composite in multi-step ultra-precision diamond cutting by combining finite element simulations with experimental observations and characterization. Be consistent with experimentally characterized microstructures, the simulated SiCp/Al composite is considered to be composed of randomly distributed polygonally-shaped SiC particles with a volume fraction of 25vol%. A multi-step cutting strategy with depths of cut ranging from 2 to 10 μm is adopted to achieve an ultimate depth of cut of 10 μm. Intrinsic material parameters and extrinsic cutting conditions utilized in finite element simulations of SiCp/Al cutting are consistent with those used in corresponding experiments. Simulation results reveal different particle-tool interactions and failure modes of SiC particles, as well as their correlations with machining force evolution, residual stress distribution and machined surface topography. A detailed comparison between numerical simulation results and experimental data of multi-step diamond cutting of SiCp/Al composite reveals a substantial impact of the number of cutting steps on particle-tool interactions and machined surface quality. These findings provide guidelines for achieving high surface finish of SiCp/Al composites by ultra-precision diamond cutting.     

单向陶瓷基复合材料阻尼计算方法

根据陶瓷基复合材料界面脱黏区及黏结区纤维和基体的应力分布,分析了拉伸和卸载时纤维相对基体的滑移机制,发展了单向陶瓷基复合材料阻尼的计算方法,并进行了数值分析.结果表明:①陶瓷基复合材料本身固有黏弹性阻尼很小,材料发生基体开裂后,界面滑移而引起的摩擦耗散成为材料主要的阻尼机制;②减小界面剪应力或减小纤维体积含量可以改善材料的阻尼性能;③材料阻尼随裂纹间距的增大而减小.      

碳/环氧复合材料钻孔刀具磨损机理研究

对高速钻削碳／环氧复合材料的刀具磨损特性、刀具磨损对钻削力的影响等进行了研究。结果表明：钻削彬环氧复合材料时，刀具磨损的原因主要是磨粒磨损（或质点磨损），随着刀具磨损的加剧，轴向力持续增加，扭矩的增加逐渐趋于平缓，因此控制刀具磨损是减小轴向力最有效的手段之一。