永磁有限转角力矩电机的仿真与实验

随着多电飞机的快速发展及成附件轻小化、高效能的迫切需求,有限转角力矩电机(Limited Angle Torque Motor,LATM)在飞机引气系统中的应用日益迫切。一方面,有限转角力矩电机可以显著简化高温引气控制阀结构、减小体积;另一方面,可以基于系统需求实现引气压力和温度按需调节,减少燃油代偿损失。针对高温有限转角力矩电机工作特性不易预测的难题,建立了其数学模型、仿真模型,并通过实物试验验证了仿真模型的准确性。研究结果为有限转角力矩电机特性研究提供了参考依据。     

考虑测量约束的非合作目标近距离快速导引控制方法

研究了考虑测量约束的非合作目标近距离快速导引控制方法。首先,基于C-W方程建立了解析形式的径切联合近距离快速导引控制模型,并采用微分修正方法将解析结果进行修正;然后推导了任意初始条件下,径切联合控制双脉冲与视场角的解析关系;最后基于相对偏心率矢量建立了径切联合控制的控后效果评估模型。仿真结果表明:提出的控制方法和控后效果评估模型有效。     

点阵结构部件的增材制造路径连接方法

旨在提高点阵结构部件增材制造的加工效率.点阵结构经分层切片后,每层将产生大量待填充多边形,通过将这些多边形抽象为离散点,并在切片层面内求解旅行商问题,进行连接路径的规划,进而获得高效率的点阵模型填充路径.算法综合考虑到旅行商问题的计算效率以及连接路径的计算总长:采用蚁群算法可获得无交叉连接轨迹,计算2000个点的连接规...     

A novel virtual material layer model for predicting natural frequencies of composite bolted joints

A novel virtual material layer model based on the fractal theory was proposed to predict the natural frequencies of carbon fiber reinforced plastic composite bolted joints. Rough contact surfaces of composite bolted joints are modeled with this new proposed approach. Numerical and experimental modal analyses were conducted to validate the effectiveness of the proposed model. A good consistence is noted between the numerical and experimental results. To demonstrate the necessity of accurately modeling the rough contact surfaces in the prediction of natural frequencies, virtual material layer model was compared with the widely used traditional model based on the Master-Slave contact algorithm and experiments, respectively. Results show that the proposed model has a better agreement with experiments than the widely used traditional model (the prediction accuracy is raised by 8.77% when the pre-tightening torque is 0.5 N∙m). Real contact area ratio A* of three different virtual material layers were calculated. Value of A* were discussed with dimensionless load P*, fractal dimension D and fractal roughness G. This work provides a new efficient way for accurately modeling the rough contact surfaces and predicting the natural frequencies of composite bolted joints, which can be used to help engineers in the dynamic design of composite materials.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

用双激波模型计算风扇/压气机非设计点的性能

根据现代高速风扇/压气机内激波波系的真实结构,将适用于预测高速叶型激波损失的双激波模型引入基于基元叶片特性的流线曲率法程序,发展了一种用于预估高速风扇/压气机非设计点性能的方法。该双激波模型考虑了来流马赫数和攻角变化,较真实地反映了高马赫数风扇/压气机的实际工作状况,扩展预测风扇/压气机非设计点性能的能力。利用该模型,本文分别对一台叶尖马赫数达到1.4的大涵道比风扇和一台叶尖马赫数高达1.5的三级风扇的非设计点性能进行了计算,计算结果与试验结果保持了较高的吻合性。     

基于用户自定义变更的本体进化

提出一种基于用户自定义变更的本体进化方法。首先给出了该方法的形式化描述,建立了本体一致性模型和原子变更及冲突消解方法,然后对用户自定义变更模型进行语义描述,将用户自定义变更转换成原子变更,并对其进行了优化。最后给出了用户自定义变更及优化的实例。结果表明:本方法可以很好地满足本体进化过程中用户的复杂需求,并实现了本体变更的形式化描述,解决了各种变更中的冲突问题。     

变厚度弹性件柔性接头的非线性分析

结合试验数据,采用Mooney-Rivlin模型模拟了柔性接头的弹性件材料;根据非线性理论,采用混合插值有限元法对某一摆角状态下的柔性接头进行了大变形非线性弹性分析,并在此基础上初步探讨了厚度不均匀弹性件对层间应力的影响。计算结果表明,弹性层减薄到一定程度时,层间剪切应力沿宽度方向分布变得均匀,应力值仍集中在2 MPa以下;层间法向应力分布变化较小,呈二次曲线分布,最大值有所降低;其中,接近后法兰的弹性件厚度不均时,对各项应力最大值影响较大。     

低含气率影响下圆柱动静压轴承特性分析

为研究低含气率条件下,温度和气泡含量对润滑油黏度的影响,采用涡轮油和氮气制备油气两相流,在不同温度下采集含气率和动力黏度,拟合得到两相流的黏度计算模型.针对带有深浅腔的圆柱动静压轴承,基于拟合的黏度模型,结合有限元法和有限差分法联立求解油膜Reynolds方程、能量方程及两相流等效密度模型,分析了不同偏心率下承载力、摩...     

一种基于VPL的元器件快速建模方法

为了更好地落实航空电子模块的可制造性设计审查工作,结合航空电子模块产品特点和技术要求,建设了基于Valor软件的PCB/PCBA设计与检测自动化分析系统.元器件模型库作为该系统的必要组成部分,其覆盖范围和数据精度对审查结果至关重要.本文将从元器件模型库建设必要性、建设过程和建模工艺要求三个方面进行阐述,并提出一种基于V...