Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

A real-time combined quality control method for GNSS precise positioning in harsh environments

Global Navigation Satellite System (GNSS) precise positioning can be significantly affected by severe multipath effects and outliers in harsh environments, and highly relies on quality control strategies. Previous studies mainly focus on the posterior residuals to check and exclude the outliers in GNSS observations, limited work emphasizes the combined quality control method considering both the prior and posterior knowledge simultaneously. This paper proposed a real-time combined quality control method to process the multipath effects and outliers in harsh environments simultaneously. Specifically, in the prior stage, a modified multipath processing strategy is proposed for both phase and code observations, then a modified detection, identification, and adaptation (DIA) method considering the maximum times of data snooping is studied in the posterior stage. Two dedicated experiments in real harsh environments were carried out to evaluate the performance of the proposed combined quality control method. For the static experiment, the proposed method exhibits smaller positioning errors, the best positioning accuracy, and the highest availability in this study. Specifically, the proposed method exhibits an improved percentage of 55.4 %, 56.3 %, and 59.7 % for positioning accuracy compared to those without the quality control method in the E, N, and U directions, respectively. Besides, the proposed method can further improve the performance of ambiguity resolution with an improved percentage of 32.2 %. For the kinematic experiment, the three-dimensional positioning accuracy of the proposed method is 0.577 m, which exhibits a 40.0 % improvement compared to those without the quality control method. Also, the proposed method exhibits better performance under relatively strong multipath effects. In this sense, the proposed real-time combined quality control method is highly appreciated in terms of positioning availability, accuracy, and ambiguity resolution for GNSS precise positioning, especially in harsh environments.     

Stability characteristics and airworthiness requirements of blended wing body aircraft with podded engines

Blended-Wing-Body(BWB) aircraft have a relatively short fuselage and no horizontal tail, and they usually adopt podded engines and a V tail instead of a vertical tail. Generally,BWB aircraft have decreased longitudinal and directional static stability and damping. In this paper, the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied. According to the differences in flight characteristics of BWB aircraft and conventional aircraft, th...     

舰载机-航母间径向距离的多普勒测量

通过对多普勒频移方程进行角度变换,并利用在下滑视角和坐标变量之间的对应关系导出了在三个站点的径向距离之间的递推关系.在此基础上,进一步利用固有的几何关系,即能由任一瞬间所测得的多普勒频移值,得到舰载机-航之间径向距离的解析解.随后进行的误差分析表明基于多普勒频移测距可以实现分米级的测量精度.     

基于静气动弹性效应的飞机型架外形修正方法研究

民用客机主要针对巡航外形设计,这就需要通过静气动弹性修正得到型架外形,保证型架外形在设计巡航状态飞行时,气动性能能够恢复到巡航设计状态。本文基于混合网格的N-S方程和结构柔度矩阵方法的耦合求解,发展了大飞机静气动弹性计算方法。根据静气动弹性变形过程的可逆性,结合飞行器质量分布、发动机推力以及巡航飞行重量等设计参数,发展了考虑静气动弹性效应的飞机型架外形修正方法。利用所发展的修正方法,获得了某大型客机巡航飞行的型架修正外形,同时分析了其它飞行工况的弹性气动特性,并通过算例比较验证了本文发展方法的有效性。     

卫星大部件二维转台装配工艺方法

为了满足某卫星大部件二维转台在地面重力状态装配后，保证其在轨解锁前精度一致性，提出了二维转台装配工艺优化方法。首先通过模拟载荷配重试验，探索转台星上接口重力下变化规律，保证结构板组合加工偏差，优化卫星层板组合加工工艺方法;其次分析二维转台机构变形，采用卸载装星工装，并对二维转台卸载装配前后关键变形进行精测对比。二维转台通过模拟试验和卸载装配后，保证了地面重力压紧状态和卸载状态下装配精度均在设计指标内，满足卫星二维转台装配要求。通过模拟试验确定结构加工公差余量，在进行卸载装配时，对卸载前后精度精测对比，是卫星大部件载荷装配工艺的正确方法。     

飞机冲击载荷等效静载的确定方法研究

如何确定冲击载荷的等效静载对飞机结构的强度设计和验证具有重要意义。基于经典冲击载荷时域曲线后峰锯齿波、单自由度冲击动响应理论和位移等效原则，建立冲击载荷动态缩放系数求解公式；基于三角函数不等式关系，推导出动态缩放系数与冲击载荷作用时间、结构固有频率乘积的函数关系。建立求解冲击载荷等效静载方法的实施流程；以简化拦阻钩系统的冲击和缩比模型的水上迫降为例，对所提方法的有效性进行验证。结果表明：拦阻冲击载荷动态缩放系数的理论估计值与仿真计算值的相对误差小于4%，水上迫降等效静压与选用的设计压力相对误差为0.9%，所建立的动态缩放系数的理论计算公式精度较高，所提方法可供工程相关应用参考。     

A Robotic TeleoperationSystem for Precise Robotic Manipulation by Human-Machine Interaction

Teleoperation is of great importance in the area of robotics， especially when people are unavailable in the robot workshop. It provides a way for people to control robots remotely using human intelligence. In this paper， a robotic teleoperation system for precise robotic manipulation is established. The data glove and the 7-degrees of freedom (DOFs) force feedback controller are used for the remote control interaction. The control system and the monitor system are designed for the remote precise manipulation. The monitor system contains an image acquisition system and a human-machine interaction module， and aims to simulate and detect the robot running state. Besides，a visual object tracking algorithm is developed to estimate the states of the dynamic system from noisy observations. The established robotic teleoperation systemis applied to a series of experiments， and high-precision results are obtained， showing the effectiveness of the physical system.     

空间站复合材料收紧装置刚度及静力试验分析

针对空间站柔性翼在展开及收拢状态，通过地面结构试验，对复合材料收紧装置试验件刚度及强度进行试验摸底。对试验项目进行设计，分别对面外刚度、面内刚度、0°工况强度、90°工况强度6个工况条件进行测试，获取了复合材料收紧装置试验件的刚度、强度数据。通过强度试验可知，Y向位移最大，X方向位移最小，且理论与实际偏差小于12%，证明复合材料收紧装置理论预测方法有效，可以为后续复合材料收紧装置结构优化及工艺制造提供有效理论支撑。     

基于 MATLAB的交流电源频率调节环路仿真

在介绍某型恒频交流电源频率调节环路的组成和工作原理的基础上，分析了频率调节环路各组成部分的数学模型，建立了频率调节环路总的数学模型。文章重点讨论了某型发动机在中转速中负载状态下，改变滤波整形放大电路频率调节环路前向通道和反馈通道参数对系统动静态特性产生的影响。利用MATLAB仿真工具对系统进行了变参数仿真，得出了相应的仿真曲线，并对仿真结果进行了动静态特性分析。该仿真结果具有很好的应用价值。