跨声轴流压气机等离子体控制实验

为了能有效地拓宽压气机的失稳裕度,在一台跨声轴流压气机上进行了基于介质阻挡放电（DBD）等离子体激励扩稳的实验研究.实验中分别选取了正弦交流电源和纳秒脉冲电源提供激励,并在跨声压气机40%设计转速和65%设计转速下对其扩稳效果和效率进行了对比分析.结果表明:在40%设计转速时,正弦交流电源和纳秒脉冲电源均能有效拓宽压气机流量范围,其中正弦交流电源激励方式能够使压气机综合失速裕度改善（SMI）达到15.33%.在65%设计转速时,两种激励方式的扩稳效果明显减弱,此时纳秒脉冲电源激励方式的扩稳效果更好.在压气机效率方面,纳秒脉冲电源对压气机设计点的效率影响更小,在40%设计转速时甚至能略微提升其设计点效率.实验结果表明,合理地选择激励方式有助于提高等离子体激励的扩稳效果,为实际压气机中基于介质阻挡放电等离子体激励扩稳措施的设计提供参考.      

Experiments on unsteady vortex flowfield of typical rotor airfoils under dynamic stall conditions

A new experiment for airfoil dynamic stall is conducted by employing the advanced particle image velocimetry(PIV) technology in an open-return wind tunnel. The aim of this experimental investigation is to demonstrate the influences of different motion parameters on the convection velocity, position and strength of leading edge vortex(LEV) of airfoil under different dynamic stall conditions. Two different typical rotor airfoils, OA209 and SC1095, are measured at different free stream velocities, oscillation frequencies, and angles of attack. It is demonstrated by the measured data that the airfoil with larger leading edge radius could notably decrease the strength of LEV. The angle of attack(Ao A) of airfoil can obviously influence the dynamic stall characteristics of airfoil,and the LEV would be effectively inhibited by decreasing the mean pitch angle. In addition, the convection velocity of LEV is estimated in this measurement, and the results demonstrate that the influence of airfoil shape on convection velocity of LEV is limited, but the convection velocity of LEV would be increased by enlarging the oscillation frequency. Meanwhile, the convection velocity of LEV is a time variant value, and this value would increase as the LEV convects to the trailing edge of airfoil.     

失速改出伞阻力特征面积估算方法

研究了高平尾布局飞机的气动特性。使用失速改出伞是飞机改出深失速的重要途径,但如何确定失速改出伞的关键参数(阻力面积等)却没有现成的方法。以ARJ21-700飞机为例,分别使用公式分析法、类比法综合估算出失速改出伞的关键参数,通过模型自由飞和模拟仿真分析验证其具有足够效能将飞机改出深失速状态。形成了一套新机失速改出伞的设计方法和关键数据图表,可供其他型号飞机失速改出伞的设计研制使用。     

Effects of blade aspect ratio and taper ratio on hovering performance of cycloidal rotor with large blade pitching amplitude

In recent years, a lot of research work has been carried out on the cycloidal rotors. However, it lacks thorough understanding about the effects of the blade platform shape on the hover efficiency of the cycloidal rotor, and the knowledge of how to design the platform shape of the blades. This paper presents a numerical simulation model based on Unsteady ReynoldsAveraged Navier–Stokes equations(URANSs), which is further validated by the experimental results. The effects of blade aspect ratio and taper ratio are analyzed, which shows that the cycloidal rotors with the same chord length have quite similar performance even though the blade aspect ratio varies from a very small value to a large one. By comparing the cycloidal rotors with different taper ratios, it is found that the rotors with large blade taper ratio outperform those with small taper ratio. This is due to the fact that the blade with larger taper ratio has longer chord and hence better efficiency. The analysis results show that the unsteady aerodynamic effects due to blade pitching motion play a more important role in the efficiency than the blade platform shape. Therefore we should pay more attention to the blade airfoil and pitching motion than the blade platform shape.The main contributions of this paper include: the analysis of the effects of aspect ratio and taper ratio on the hover efficiency of cycloidal rotor based on both the experimental and numerical simulation results; the finding of the main influencing factors on the hover efficiency; the qualitative guidance on how to design the blade platform shape for cycloidal rotors.     

Nonlinear Aeroelastic Response of High-aspect-ratio Flexible Wings

The aeroelastic analysis of high-altitude, long-endurance (HALE) aircraft that features high-aspect-ratio flexible wings needs take into account structural geometrical nonlinearities and dynamic stall. For a generic nonlinear aeroelastic system, besides the stability boundary, the characteristics of the limit-cycle oscillation (LCO) should also be accurately predicted. In order to conduct nonlinear aeroelastic analysis of high-aspect-ratio flexible wings, a first-order, state-space model is developed by combining a geometrically exact, nonlinear anisotropic beam model with nonlinear ONERA (Edlin) dynamic stall model. The present investigations focus on the initiation and sustaining mechanism of the LCO and the effects of flight speed and drag on aeroelastic behaviors. Numerical results indicate that structural geometrical nonlinearities could lead to the LCO without stall occurring. As flight speed increases, dynamic stall becomes dominant and the LCO increasingly complicated. Drag could be negligible for LCO type, but should be considered to exactly predict the onset speed of flutter or LCO of high-aspect-ratio flexible wings.     

Numerical investigation of aerodynamic flow actuation produced by surface plasma actuator on 2D oscillating airfoil

Numerical simulation of unsteady flow control over an oscillating NACA0012 airfoil is investigated. Flow actuation of a turbulent flow over the airfoil is provided by low current DC surface glow discharge plasma actuator which is analytically modeled as an ion pressure force produced in the cathode sheath region. The modeled plasma actuator has an induced pressure force of about 2 k Pa under a typical experiment condition and is placed on the airfoil surface at 0% chord length and/or at 10% chord length. The plasma actuator at deep-stall angles(from 5° to 25°) is able to slightly delay a dynamic stall and to weaken a pressure fluctuation in down-stroke motion. As a result, the wake region is reduced. The actuation effect varies with different plasma pulse frequencies, actuator locations and reduced frequencies. A lift coefficient can increase up to 70% by a selective operation of the plasma actuator with various plasma frequencies and locations as the angle of attack changes. Active flow control which is a key advantageous feature of the plasma actuator reveals that a dynamic stall phenomenon can be controlled by the surface plasma actuator with less power consumption if a careful control scheme of the plasma actuator is employed with the optimized plasma pulse frequency and actuator location corresponding to a dynamic change in reduced frequency.     

动失速型非定常分离流的主动控制

本文对动失速型非定常分离流的主动控制方法在低速风洞中进行了实验研究。在二元平板模型中部安装一作振荡运动的主扰流板产生动失速型非定常分离流；在其上游的模型表现上安装另一控制用的振荡小扰流板，应用非定常流的相平均测压技术，研究前置小扰流板的控制效果。实验结果表明，通过控制两扰流板之间的运动相位差，可以显著影响并改变动失速型分离涡的强度和对流时间特性。在有利的控制相位下，涡的负压峰值最大可降低４８％，涡     

推力矢量飞机平衡区的计算

通过对推力矢量控制下飞机动力学特性的分析，定义了飞机机动的平衡区并进行计算，确定了推力矢量在低速机动中对飞机平衡特性的决定性影响，并与常规飞机的平衡特性进行了比较分析。将以往用来分析飞机尾旋运动的分歧与突变理论（ＢＡＴＣＭ）推广到推力矢量飞机过失速平衡特性的计算中，确定了在不同的飞行状态及推力矢量系统配置下飞机过失速机动的平衡区。其结果有助于理解推力矢量系统的效用及其设计参数对飞机过失速机动能力的     

多发螺旋桨飞机动力失速动态特性理论计算方法研究

本文针对多发螺旋桨飞机的特点,推导出用于分析多发螺旋桨飞机动力失速动态特性的计算方程,并用此方程研究了此类飞机带动力的失速动态特性,计算结果与飞行结论相符。 文中提出的理论计算方法,较全面地考虑了螺旋桨飞机所特有的动力效应,因此较准确地反应了多发螺旋桨飞机的动力失速特性。所以,它除了能分析多发螺旋桨飞机的动力失速外,对于研究飞机动力失速的全数字实时仿真和研究失速/尾旋飞行模拟器也有一定的参考价值。     

失速／尾旋模型自由飞试验的空间设计问题

本文论述了在制定飞机的失速/尾旋模型自由飞试验总体方案时必须充分考虑的空间利用问题之重要性;分析了制约试验空间的诸因素;提出了设计飞行剖面的工程估算方法——其中一些半经验方法之使用效果已为我们的自由飞试验所证实;以我们已成功地进行过的带动力遥控试验机、摇控热气飞艇带飞/投放、飞机带飞/投放的失速/尾旋模型自由飞试验为例,剖析了组成整个飞行剖面的各个飞行阶段之特点和影响因素,并以此为据提出了充分利用自由飞试验空间的一些见解。