一种修正的双模式盲均衡算法研究

传统的CMA盲均衡算法存在收敛速度较慢、稳态均方误差较大的缺点。结合了判决引导算法的CMA算法虽具有稳态均方误差小的优势,但是算法本身收敛能力弱,在信号眼图未张开的条件下难以保证算法收敛。针对上述不足,提出了一种含软判决思想的双模式盲均衡算法。该算法通过最大化均衡器输出信号的后验概率密度函数来获得均衡器抽头系数的最优值。计算机仿真结果表明,所提算法可以有效地纠正输出信号的相位旋转,具有较好的均衡效果。     

基于椭圆路径的光学镜面超精密研磨技术研究

利用基于椭圆成形方法建立的二次回转曲面加工误差模型,并用最小二乘方法建立了二次回转曲面铣磨误差辨识模型。考虑到各项误差对面形误差影响的相似性,分析了合并、分开辨识相似误差所引入的误差,以此得到处理相似误差的策略。     

空间相机相对辐射定标精度分析

文章介绍了CCD相机辐射定标概念;分析对比了平均行标准差法、平均标准差法和广义噪声法三种计算相对辐射定标精度的算法;对归一化系数法、最小二乘法进行相对定标的数学原理进行了介绍;并采用中巴地球资源卫星02B CCD相机辐射定标数据计算三种定标精度,验证了理论分析的正确性,并指出了现有定义算法的不足处。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

ARMAX模型参数估计的新两步法

 本文提出了一种ARMAX模型参数估计的新两步法。这种方法与其它递推估计方法（如增广矩阵法,极大似然法,Durbin两步法、三步法等）比较,具有较好的收敛特性,对参数的估计,特别是对C参数的估计比较精确,这是利用其它方法,一直未能很好解决的一个难题。     

基于最小二乘法的磁力计误差补偿与校准

磁力计在行人自主导航系统中用于提供绝对航行信息,而航向的精度直接决定着系统定位的精度。针对目前磁力计标定方法中存在磁干扰等问题,提出了一种基于最小二乘法和"8"字校准法对磁力计零偏进行实时校准的方法。该方法先利用最小二乘法修正磁力计零偏,再根据磁力计的模值大小及方差作为磁干扰的判断条件,用"8"字旋转方式进行实时校准。通过仿真和实验验证,新的方法有效地解决了磁力计误差补偿问题,证明了改进误差补偿算法的可行性和有效性。     

低速单级轴流压气机自引气扩稳实验

在一台低速单级轴流压气机上采用自引气-喷气方式进行了实验研究,实验中分析比较了不同的引气方式对压气机失速裕度改善(SMI)以及对压气机效率的影响,同时对不同自引气方式的扩稳机理进行了探讨.实验结果表明:自引气方式能够有效的改善压气机失速裕度,并且能够略微提高压气机效率.与传统的外部引气相比,节省了外部引气所需要的外部空气压缩系统;为自引气在实际压气机稳定性控制中的应用提供参考.      

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.     

活门型孔“化方为圆”算法

通过对航空发动机控制系统活门型孔的流量系数稳定性控制的方法进行研究,提出了一套能够将方形活门型孔转化为有规律排列组合小圆孔的算法,并通过实例验证了算法的正确性,同时转化误差小于0.7%,基本实现了工程意义上的等流量系数。该算法将加工工艺性差且计量精度低的方形活门型孔转化为有规律排列组合小圆孔,消除了方形型孔流量系数变化的影响,改变了活门型孔加工方法,减少了对人和环境的危害,提高了活门型孔的计量精度,减小了活门的液动力,具有极大的工程应用价值。 该算法可以实现将方形、梯形（含三角形）及其组合型孔等任意型孔的转化,具有工程上的普遍适用性。     

基于DS算法的混胺燃料近红外光谱分析模型传递

对混胺燃料的近红外光谱分析模型的传递方法进行研究。采用 K/S(Kennard/Stone)算法选择转换集样品,采摘用直接校正(Direct Standardization,DS)算法对从仪器采集的光谱进行校正。通过光谱平均差异(ARMS)比较奇异值分解(Singular Value Decomposition,SVD)算法和偏最小二乘法(Partial Least Squares,PLS)对光谱校正的效果。当 PLS算法的最佳主因子数为 3时,DS-PLS算法的光谱校正率可达到 97.5%,优于 DS-SVD算法。混胺样品的分析模型经过 DS-PLS算法传递后,对从仪器的混胺样品各项指标的预测标准偏差(SEP)明显好于传递前,与主仪器预测效果接近,说明采用 K/S算法选择合适的转换集样品后,通过 DS-PLS模型传递算法可有效降低仪器间的光谱差异,实现近红外光谱分析模型在各台光谱仪之间共享。