被动型氢原子钟原子跃迁谱线测试与分析

被动型氢原子钟的原子跃迁谱线特性决定了其稳定度指标.为使其稳定度指标达到最优,通过设计数字式测试电路对氢原子钟物理部分进行探测,获得了不同参数配置下的原子跃迁谱线,并通过数据处理分析其信噪比、增益和线宽等特性,提出了一种参数优化方案,为原子钟闭环参数设置提供了依据.     

适用于长时间烧蚀防热的蜂窝增强低密度材料

针对长时间烧蚀防热对防热材料的需求,研制了两种蜂窝增强低密度烧蚀防热材料,采用电弧风
洞加热设备对其防热性能进行了考核,并对其力学及热物理性能进行了研究。结果表明,在两种长时间(1 000
s 左右)热环境的考核下,蜂窝增强低密度材料烧蚀后背面温度均低于200℃,表面碳层均匀、完整,无明显烧蚀
量,显示了优异的隔热性能和良好的抗气流冲刷能力。     

Dynamic neighborhood genetic learning particle swarm optimization for high-power-density electric propulsion motor

To maximize the power density of the electric propulsion motor in aerospace application, this paper proposes a novel Dynamic Neighborhood Genetic Learning Particle Swarm Optimization (DNGL-PSO) for the motor design, which can deal with the insufficient population diversity and non-global optimal solution issues. The DNGL-PSO framework is composed of the dynamic neighborhood module and the particle update module. To improve the population diversity, the dynamic neighborhood strategy is first proposed, which combines the local neighborhood exemplar generation mechanism and the shuffling mechanism. The local neighborhood exemplar generation mechanism enlarges the search range of the algorithm in the solution space, thus obtaining high-quality exemplars. Meanwhile, when the global optimal solution cannot update its fitness value, the shuffling mechanism module is triggered to dynamically change the local neighborhood members. The roulette wheel selection operator is introduced into the shuffling mechanism to ensure that particles with larger fitness value are selected with a higher probability and remain in the local neighborhood. Then, the global learning based particle update approach is proposed, which can achieve a good balance between the expansion of the search range in the early stage and the acceleration of local convergence in the later stage. Finally, the optimization design of the electric propulsion motor is conducted to verify the effectiveness of the proposed DNGL-PSO. The simulation results show that the proposed DNGL-PSO has excellent adaptability, optimization efficiency and global optimization capability, while the optimized electric propulsion motor has a high power density of 5.207 kW/kg with the efficiency of 96.12%.     

Ultrasonic constitutive model and its application in ultrasonic vibration-assisted milling Ti3Al intermetallics

Ultrasonic vibration-assisted technology is widely utilized in the performance research and manufacturing process of metallic materials owing to its advantages of introducing highfrequency acoustic systems. However, the acoustic plasticity constitutive model and potential mechanism, involving Ti₃Al intermetallic compounds, have not yet been clarified. Therefore, the Ultrasonic-K-M hybrid acoustic constitutive model of Ti₃Al was established by considering the stress superpos...     

Static magnetic field analysis of hollow-cup motor model and bow-shaped permanent magnet design

The hollow-cup Permanent Magnet (PM) motors have the characteristics of low power consumption, and are widely used in the aerospace field. At present, the tile-shaped PMs used by hollow-cup PM motors have poor sinusoidal characteristics of the air gap magnetic flux density waveform, which will cause torque ripple. The existing method for improving the air gap magnetic flux density waveform is not very effective when applied to hollow cup, a special motor with no stator core and large air gap. A bow-shaped PMs structure is designed for the hollow-cup motor in this paper. First, the equivalent surface current method is used to calculate the analytical formula of the static magnetic field of the model. Then, the Finite Element (FE) method is used to calculate the static air gap flux density waveform of conventional tile-shaped PMs and bow-shaped PMs with different bow heights, and the corresponding harmonics and sine distortion are obtained by Fourier decomposition. The simulation results show that the bow-shaped PMs can effectively improve the sinusoidal characteristics of the static air gap flux density waveform. And the suitable bow height is determined. Finally, a prototype is made based on the suitable bow height for experiments, and compared with the analytical result and the FE result, and the accuracy and effectiveness of the bow-shaped PMs with the suitable bow height are verified.     

Investigation of anode shaping process during co-rotating electrochemical machining of convex structure on inner surface

A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part. The electrodes motion and material removal method of co-rotating electrochemical machining are different from traditional electrochemical machining. An equivalent kinematic model is established to analyze the novel electrodes motion,since the anode and cathode rotate in the same direction while the cathode simultaneously feeds along the line of centres. Acc...     

Guided wave propagation analysis in stiffened panel using time-domain spectral finite element method

Stiffened panels have been widely utilized in fuselages and wings as critical load-bearing components. These structures are prone to be damaged under long-term and extreme loads, and their health monitoring has been a common concern. The guided wave-based monitoring method is regarded as an efficient approach to detect the damage in stiffened plates because of its wide monitoring range and high sensitivity to micro-damage. Efficient simulation of wave propagation can theoretically demonstrate the detection mechanism of the method. In this study, a Time-Domain Spectral Finite Element Method (TD-SFEM) is adopted to study the wavefield in stiffened plates, where continuous Absorbing Layers with Increasing Damping (ALID) strategy is proposed to circumvent the disturbance of reflected waves on boundaries. After the convergence analysis, the developed TD-SFEM with ALID is validated by the finite element method first. Then, wave scattering and the influence of the stiffener are investigated in detail by comparing the results with the non-stiffened structure. Finally, the effects of the parameters of the stiffener, such as the height and width, on wave propagation are studied, respectively. The results illustrate that the proposed TD-SFEM with ALID is an efficient approach to study the wave propagation in the stiffened plate and can reveal the mechanism of influence of the stiffener. It is found that the height of the stiffener changes the interference of wavefield in the plate, while the effects of the width are mainly in wave scattering and mode conversion.     

Comparison of electron density measurements from CSES and Swarm satellites with GNSS ionospheric tomography data

Electron density measurements obtained from China Seismo‐Electromagnetic Satellite (CSES) and Swarm-B can play an increasingly important role in the study of ionosphere above F2 peak height. This study presented a comprehensive comparison of electron density products obtained from Langmuir probe mounted on CSES and Swarm-B with ionospheric tomography for a whole year period of 2019. CSES was fully compared with Swarm-B on a global scale, including both absolute and relative differences, and a new index called NFI was developed to better quantify the similarity between two latitudinal profiles of electron density. CSES and Swarm-B were then compared with tomography respectively in four regions, roughly located in America, Europe, Australia and China. Results indicated that CSES data are consistent with Swarm-B, as NFI values exceed 0.6 for most of the analyses. Tomography and Swarm-B were found to have a good agreement as their biases are less than 0.2 × 10⁵ el/cm³ in general. For the comparison between CSES and tomography, the bias increased to around 0.6 × 10⁵ el/cm³ but the standard deviation changed slightly, validating the underestimation of electron density by CSES. The spatiotemporal comparisons of CSES and Swarm-B with tomography showed that: 1) the differences in electron density were relatively low in middle latitudes and increased rapidly in the regions of equatorial ionization anomaly; 2) Swarm-B has a better consistent with tomography than CSES, but both are capable of detecting ionosphere anomalies such as midlatitude arcs; and 3) CSES and Swarm-B both can capture the seasonal changes of electron density, while their values are basically smaller than those from tomography in Spring and Summer months.     

遥感卫星多路数据传输系统同频共用方法

为节省频率资源，遥感卫星通常采用扩频体制实现多路数据的同频共用传输，针对通道间容易引起相互干扰的问题进行了研究，通过改进码分多址干扰估算模型，对采用平衡Gold码序列扩频系统抗干扰容限上界进行预测。在满足国际电信联盟（ITU）对卫星辐射功率通量密度约束条件下，提出了一种基于直接序列扩频体制的两路业务数据同频共用传输方法。仿真结果表明：当载波频率2GHz左右，两路辐射源的EIRP之差不大于8～15dBw时可以实现同频共用传输；如对信号扩频带宽进行差异化处理，则其相互兼容性还可进一步提高。     

齿轮故障识别的密度峰值聚类欠定盲源分离算法

为提高盲源分离算法在振动源数目估计问题中的噪声鲁棒性，提出了一种基于密度峰值聚类的欠定盲源分离算法。对预处理后的信号提取单源点，通过密度峰值聚类对单源点进行聚类得到混合矩阵的估计值。通过基于压缩感知模型对源信号进行重构，得到分离信号。为验证所提算法分离准确性和噪声鲁棒性，用所提算法对不同信噪比下的仿真信号进行分离，结果显示：在信噪比不低于4 dB时，所提算法均可以准确分离出源信号，算法的准确性和鲁棒性得到验证。设计旋转部件故障诊断试验台对所提算法在实际应用中的有效性进行验证，对实测复合故障振动信号进行分离，试验结果表明该算法成功分离出观测信号中的锥齿轮和行星齿轮单一故障特征，有助于工程中旋转部件故障诊断。