加热圆管流动热阻力及熵产的数值分析

本文利用数值计算方法,对圆管加热流动的热阻力和熵产进行了综合分析研究。以空气加热圆管为例,通过联立求解流体力学基本方程和熵产方程,获得了热阻力、熵产及其随加热量、管长而变化的关系。数值分析结果表明,加热流动中的热阻力与熵产二者之间存在着对应相关的关系。     

基于视加速度的固体火箭发动机飞行比冲估算

建立了基于遥测视加速度的推力及比冲计算模型,模型中考虑了附加质量对发动机推力的影响,对固体火箭发动机飞行试验推力及比冲进行了计算,并与利用标准内弹道预示程序重新预示的发动机推力及比冲进行了对比,两种方法计算结果一致。算例表明,利用飞行试验遥测视加速度计算发动机推力及比冲的计算模型正确,有关参数的选取和处理方法可行;该方法可准确再现发动机飞行过程的实时推力和比冲;可有效用于发动机飞行试验结果的快速分析与评估。     

基于熵权的灰色关联概率数据关联算法

在多目标信息融合中,通过数据关联判断来自不同传感器的数据是否代表同一个目标,传统数据关联一般采用联合概率数据关联算法,单纯依靠状态量测且计算复杂。而基于灰色关联的概率数据关联算法,能够利用目标的多个特征信息进行数据关联,且计算简单准确。特征信息一般由专家主观判断给出。提出了基于熵权的灰色关联概率数据关联算法,由量测数据自适应的给出各特征的权重系数,不依赖于专家。仿真表明,该关联算法具有很好的工程实用性。     

基于样本熵的语音信号检测算法

船舶自身发出的巨大噪声,严重影响了通讯设备通讯端船舶工作者的正常语音交流和通讯,须要进行语音信号增强,将语音信号从背景噪声中检测分离出来。为此,文章在分析语音信号与船舶背景噪声信号时域序列复杂性基础上,提出基于信号序列样本熵的语音信号检测算法。该算法将含噪信号进行分帧后,首先计算每帧信号的样本熵,并根据自适应预设阈值对信号进行初始判断；然后,利用信号通常持续一定时间的连续性,对信号初始判断进行平滑,得到信号的最终判别类别,实现对语音信号的检测。经过大量实测实验数据的验证,环境噪声信号的辨别准确度为 90.33%,语音信号为 95.05%,该算法取得了较好的判别精度。     

Ground-Based Cloud Using Exponential Entropy/Exponential Gray Entropy and UPSO

Objective and accurate classification model or method of cloud image is a prerequisite for accurate weather monitoring and forecast. Thus safety of aircraft taking off and landing and air flight can be guaranteed. Thresholding is a kind of simple and effective method of cloud classification. It can realize automated ground-based cloud detection and cloudage observation. The existing segmentation methods based on fixed threshold and single threshold cannot achieve good segmentation effect. Thus it is difficult to obtain the accurate result of cloud detection and cloudage observation. In view of the above-mentioned problems, multi-thresholding methods of ground-based cloud based on exponential entropy/exponential gray entropy and uniform searching particle swarm optimization （UPSO） are proposed. Exponential entropy and exponential gray entropy make up for the defects of undefined value and zero value in Shannon entropy. In addition, exponential gray entropy reflects the relative uniformity of gray levels within the cloud cluster and background cluster. Cloud regions and background regions of different gray level ranges can be distinguished more precisely using the multi-thresholding strategy. In order to reduce computational complexity of original exhaustive algorithm for multi-threshold selection, the UPSO algorithm is adopted. It can find the optimal thresholds quickly and accurately. As a result, the real-time processing of segmentation of groundbased cloud image can be realized. The experimental results show that, in comparison with the existing groundbased cloud image segmentation methods and multi-thresholding method based on maximum Shannon entropy, the proposed methods can extract the boundary shape, textures and details feature of cloud more clearly. Therefore, the accuracies of cloudage detection and morphology classification for ground-based cloud are both improved.     

某直升机燃油增压泵性能优化

利用流体仿真技术对某直升机燃油增压泵过流部件进行优化设计,并完成了试验验证。结果表明,经过理论设计-仿真计算-理论设计循环优化后的产品,其性能明显优于原型产品:提高了泵的效率,降低了泵的消耗电流,提高产品工作稳定性。     

一种新型双组元卫星推进剂的研究

通过热力学计算,选择NHO-3作为甲基肼高能添加剂,通过冰点测试、着火延迟期测试确定了NHO-3的含量,该种以甲基肼为主体的新型燃料与氧化剂MON-20组成的双组元推进剂具有冰点低、比冲高、着火延迟期短的优点,可应用于卫星、飞船等领域。     

Scatter factor confidence interval estimate of least square maximum entropy quantile function for small samples

Classic maximum entropy quantile function method (CMEQFM) based on the probabil-ity weighted moments (PWMs) can accurately estimate the quantile function of random variable on small samples, but inaccurately on the very small samples. To overcome this weakness, least square maximum entropy quantile function method (LSMEQFM) and that with constraint condition (LSMEQFMCC) are proposed. To improve the confidence level of quantile function estimation, scatter factor method is combined with maximum entropy method to estimate the confidence inter-val of quantile function. From the comparisons of these methods about two common probability distributions and one engineering application, it is showed that CMEQFM can estimate the quan-tile function accurately on the small samples but inaccurately on the very small samples (10 sam-ples); LSMEQFM and LSMEQFMCC can be successfully applied to the very small samples;with consideration of the constraint condition on quantile function, LSMEQFMCC is more stable and computationally accurate than LSMEQFM; scatter factor confidence interval estimation method based on LSMEQFM or LSMEQFMCC has good estimation accuracy on the confidence interval of quantile function, and that based on LSMEQFMCC is the most stable and accurate method on the very small samples (10 samples).     

The entropy in groups – a clue to galaxy formation

The entropy in the hot X-ray gas in groups of galaxies is a fossil of the process of galaxy formation The amount of entropy in these low mass systems considerably exceeds that predicted from structure formation models. To explain these results requires “extra” energy which is a relic of the process of star formation and active galaxy heating. We present new XMM results on the entropy and entropy profiles. These results are inconsistent with pre-heating scenarios which have been developed to explain the entropy floor in groups but are broadly consistent with models of structure formation which include the effects of heating and/or the cooling of the gas. The total entropy in these systems provides a strong constraint on all models of galaxy and group formation, and on the poorly defined feedback process which controls the transformation of gas into stars and thus the formation of structure in the universe.     

民用客机后机身外形设计研究

CC-200是一款单通道、中程大型民用客机。CC-200民用客机具有大展弦比、小后掠角、相对较低的巡航速度等技术特点。CC-200的后机身的外形长度为6.458 m,上掠角为12°,与地面水平线的最小间隙值为0.15 m。后机身外形及其它部段的外形采用CATIA V5软件建立了三维数模,后机身采用ESDU 80006和ESDU7011中的方法进行阻力增量的计算、评估。计算表明,在机身迎角一定的情况下,后机身阻力增量随着上掠角的增大而增大。