数字化技术在叶轮研制中的应用

本文通过分析归纳建立了一种叶轮数字化建模方法，并利用该方法成功实现了某型叶轮三维模型创建，同时也根据该数字化模型实现了模具数字化设计及其数控加工。     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

Modeling visuospatial reasoning

I apply my proposed modification of Soar/Spatial/Visual System and Kosslyn’s (1983) computational operations on images to problems within a 2 × 2 taxonomy that classifies research according to whether the coding involves static or dynamic relations within an object or between objects (Newcombe & Shipley, 2015). I then repeat this analysis for problems that are included in mathematics and science curricula. Because many of these problems involve reasoning from diagrams Hegarty’s (2011) framework for reasoning from visual-spatial displays provides additional support for organizing this topic. Two more relevant frameworks specify reasoning at different levels of abstraction (Reed, 2016) and with different combinations of actions and objects (Reed, 2018). The article concludes with suggestions for future directions.     

无人机高速DS/FH混合扩频通信系统关键模块设计

针对UAV(Unmanned Aerial Vehicle,无人机)测控链路高抗干扰需求,给出了实现跳频速率20 000次/s的扩跳混合无人机测控数据链系统实现方案.系统采用跳频频率并行捕获模式.跳频源设计采用直接频率合成、DDS(Direct Digital Synthesis,直接数字频率合成)和PLL (Phase-Locked Loop,锁相环)相结合的混合频率合成技术.利用相位响应滤波器,通过正交调制技术完成MSK(Minimum Shift Keying,最小频移键控)、GMSK (GaussianMinimum Shift Keying,高斯最小频移键控)调制.通过推导得出2 bit差分解调输出与载波频率选择有关,且为四分之数据率的整数倍关系.然后通过实例分析给出了跳频频率间隔选取方法,即跳频间隔应当将临近跳频的主瓣分开,同时跳频载波频率应当设在其他跳频频谱的零点处.最后总结了高速扩跳频系统参数设计一般步骤.     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.     

基于雷达航迹的航空器质量估算

为保障基于轨迹运行的顺利实施,必须提高四维航迹预测的精度,而四维航迹的精准预测依赖于航空器质量准确估算。鉴于此,构建并分析了航空器能量模型;基于雷达航迹与航空器基础资料( BADA),提出了新型的航空器质量估算方法与步骤;利用最小二乘算法求解了航空器质量的估计值;分别基于预测航迹、雷达轨迹与QAR数据,采用相对误差作为评价指标,实施验证与分析。验证结果表明,提出的方法可将航空器质量估算误差控制在5%以内,从而能够有效地提高航迹预测精度。     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

某型装备轴承件无失效时的可靠性参数估计

针对寿命服从威布尔分布的某型装备轴承件在无失效数据时的可靠性参数估计问题,首先,以失效概率为待估参数,取其先验分布为Beta分布,在2个超参数的先验密度函数为2种不同情形下,建立了失效概率的2种EBayes估计模型,分析了稳健性、渐近性和单调性;然后,对威布尔分布参数进行了加权最小二乘估计,进而建立了可靠度的2种E-Bayes估计模型,分析了稳健性和单调性;最后,结合实例数据进行了可靠性参数估计与分析,指出第2种估计模型更加合理有效。     

小卫星侦察星座性能评估研究

针对小卫星侦察星座性能评估问题,从覆盖、成本和弹性三方面对小卫星侦察星座的性能指标进行研究,分别构建了考虑存储容量约束的覆盖能力评估模型、成本估计模型以及弹性能力评估模型。在覆盖能力评估模型中,将卫星存储容量作为约束条件,结合卫星覆盖几何模型分析了卫星对地侦察的工作条件,提出考虑存储容量的覆盖指标计算方法;通过小卫星成本模型(small satellite cost model,SSCM)对星座各分系统的成本进行估计;在弹性评估模型中,提出了星座性能损失率指标,并根据星座失效状态概率函数确定了不同失效状态下星座性能损失率的权重。将上述模型应用于SkySat和吉林一号星座的性能评估过程中,结果表明SkySat比吉林一号覆盖能力强、成本低,弹性差。提出的三个模型可用于评价星座优劣,为小卫星侦察星座的建设和性能评估工作提供参考。     

一种小天体旋转参数估计方法

小天体旋转参数是科学数据,也是小天体测绘,着陆导航的基础数据.研究一种在小天体探测接近段过程中使用的基于图像上特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法.该方法首先建立小天体旋转关系模型,表示小天体在相机坐标系中的姿态变化;然后定义小天体旋转的状态方程,推到了扩展卡尔曼滤波器的计算过程.通过对观测图像序列上的特征点跟踪,利用扩展卡尔曼滤波器方法得到小天体旋转轴指向和自转角速度估计.实验中,在仿真相机与小天体相机100 km距离上,分析了相机坐标系小天体坐标系之间的四元数初值,图像上特征点跟踪精度,相机的观测指向等因素对小天体旋转参数估计精度的影响.实验结果表明,提出的基于图像特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法能够得到具有较高精度的估计结果.