Preliminary design and optimization of slotted tube grain for solid rocket motor

In this paper,design and optimization technique of slotted tube grain for solid rocket motors has been discussed.In doing so,the design objectives and constraints have been set,geometric parameters identified,performance prediction parameters calculated,thereafter preliminary designs completed and finally optimal design reached.Geometric model for slotted tube grain configuration has been developed.Average thrust has been taken as the objective function with constraints of burning time,mass of propellant,fixed length and diameter of chamber case.Lumped parameter method has been used for calculating the performance prediction parameters.A set of preliminary designs has been completed and an analysis of these results conducted.Although all the preliminary results fulfill the design requirements in terms of objective function and constraints,however in order to attain the optimal design,Sequential quadratic programming optimization technique has been adopted.As the slotted tube grain geometry is totally dependent upon various independent variables and each of these variables has a bearing on explicit characteristic of grain designing,hence affects of the independent variables on performance parameters have been examined,thus variation laws have been developed.Basing on the variation laws and the analysis of preliminary design results,upper and lower limits have been defined for the independent geometric variables and an initial guess provided for conducting optimization.Results attained exhibits that an optimal result has been attained and the value of objective function has been maximized.All the design constraint limits have also been met while ensuring sound values of volumetric loading fraction,web fraction and neutrality.This methodology of design and optimization of slotted tube grain for solid rocket motors can be used by engineers as a reference guide for actual design and engineering purposes.      

大型真空容器有压复压系统

对于一些特殊用途的设施,如用于训练航天员的地面模拟舱,对复压过程有严格要求.为了分析某些对复压速率有要求的设施的复压过程,设计了有压复压系统;建立了大型真空容器有压复压系统的分段集中参数模型和传热模型,并且对这些模型进行了仿真分析.仿真表明:有压复压可获得比大气复压大得多的复压速率;传热会降低复压速率;分段集中参数长管道模型能提高仿真精度,同时不会过大增加计算量.对某体积为200m3的容器复压试验表明,考虑容器换热的仿真计算与实际调试情况误差在5%左右,表明了理论分析计算的正确性.      

Experimental Study of Motion of Nitrogen Taylor Bubbles and Liquid Slugs in Inclined Tubes

This article studies rising velocity of Taylor bubbles and liquid slugs in liquid nitrogen at different axial positions in upward inclined tubes by means of a high speed motion analyzer. The bottom-closed tubes in the experiments are 1.0 m long with an inner diameter of 0.014 m or 0.018 m. The tube inclines upward from 0° to 50° with respect to the normal. Statistical method is used to analyze the data of the Taylor bubble and the liquid slug velocity. Reflecting the effects of the inclination angle on the rising velocity of Taylor bubbles and liquid slugs, the experimental results indicate the similar trend the Taylor bubble velocity and the liquid slug velocity have: it increases first, and then decreases with the increase of the inclination angle. Moreover, with the increase of the inclination angle, the liquid slug velocity becomes greater than Taylor bubble velocity.     

双U形管束换热器压降和热效率模型实验

在低速风洞上实验研究了双U形管束换热器压降特性以及热效率,着重对比了U形管截面形状和换热器安装角的影响.结果表明:在相同的U形管管内平均速度下,椭圆管换热器的管内压降高于圆管换热器,在较高的管内平均速度下两者的差异更为明显;对于外部流动,换热器安装角增大所诱导的外部流动压降显著增加,在较小的换热器安装角下,椭圆管换热器的管外压降略大于圆管换热器,而在较大的换热器安装角下,椭圆管换热器的管外压降则显著低于圆管换热器;安装角为30°的换热器传热系数较安装角为10°时可以提高约50%,在密流比为0.4时,椭圆管换热器的热效率相对于圆管换热器约有6%的增加.      

Internal ballistic simulation of multi-burning-rate solid rocket motor based on parameterized feature CAD model

Internal ballistic simulation (IBS) method of multi-burning-rate solid rocket motor (SRM) was developed based on 3-D burning regression method by parameterized feature CAD model (PFCADM) and lumped parameter, in consideration of time-dependent, erosive-burning-effect from internal ballistic numerical algorithm. By driving multi-parameter CAD model based on PFCADM, the approach is capable of conducting the geometric regression simulation of various grain combinations of complex configurations with different burning rates. Through suitably simplifying the internal ballistic numerical algorithm, the problems of coupling geometric regression simulation of sub-grains of different burning rates and high computational consumption of internal ballistic calculation were solved. One tri-burning-rate grain motor, which had been firing-tested, was used as the validation case of simulation. The results show that, with the 3-D grain regression model and sufficient accurate internal ballistic algorithm, the method realizes IBS of the case in low computational-consumption prediction of its performance within the accuracy of 2% during 1h clock-time. The application of the method provides a practical approach to aid SRM design of multi-burning-rate grain.      

W波段多注交错双栅行波放大器的高频特性

提出了一种采用平面线性排列的3个圆形电子注代替平面带状电子注的W波段交错双栅行波放大器微型化慢波高频结构,并重点对其行波传输特性和输入输出耦合特性进行了仿真设计和参数优化.结果表明,这种平面微型化高频结构的行波传输色散特性良好且有很大的工作带宽,所产生的强轴向电场分布非常有利于电子注与高频场的能量交换和相互作用.在保证平面微型结构中圆形注通道直径和带状注通道高度相同的情况下,得到的耦合阻抗是带状注交错双栅慢波高频系统2~3倍,为行波放大器高效率的注波互作用和高功率输出提供了新的研究思路.为了与该交错双栅高频系统相匹配,提出了一种更为简单易行的输入与输出耦合结构,仅采用三周期渐变过渡段就可以实现反射系数S₁₁在较宽频带内低于-20dB的良好结果,更有利于行波放大器未来的工程实现与应用.      

热气防冰系统内表面弦向传热性能衰减规律

利用反向热流法实验研究了弦向3排射流喷口,且中央喷口正对前缘驻点结构下射流冲击热气防冰系统前缘内表面的局部传热特性。重点研究了喷孔射流出口雷诺数Re_j、笛形管相对于前缘的距离与孔径比Z_n/d、射流冲击驻点区弦向弧长与孔径比r/d对冲击前缘靶面的局部传热性能分布的影响。实验中Re_j范围为2.5×104~1×105,Z_n/d范围为1.736~27.5,r/d范围为13.21~61.5。结果表明,局部传热性能分布曲线为从驻点开始向两侧衰减的钟形曲线,包括稳定段、下降段和结束段3部分,其中稳定段只受参数r/d的影响,而参数Re_j、Z_n/d和r/d均能够明显影响下降段的下降速率,参数r/d则几乎不会改变下降段的总下降幅度。总结了此类喷口结构下射流冲击前缘换热性能衰减分布曲线的通用实验关联式,以指导防冰系统的设计和热性能的评估。      

基于机器学习的管材数控弯曲质量预测

在管材数控（NC）弯曲过程中,可能出现起皱、过度减薄的质量缺陷,同时会不可避免地发生回弹,都将严重影响成形质量。为了对数控弯曲成形质量进行预测,提出了使用有限元模拟与机器学习相结合的方法,并建立了快速的成形质量预测方法。首先,建立了有效的管材数控弯曲的参数化有限元模型,在工艺参数取值范围中随机选择进行大量的模拟实验作为样本,完成学习数据的挖掘。随后,基于径向基函数（RBF）神经网络建立壁厚减薄与回弹程度的预测模型并使用支持向量机（SVM）建立管材起皱的预测模型。最后,使用模型对新的实例进行预测,并利用模拟与数控弯曲实验对预测模型进行验证。 该方法可以对大直径薄壁管材数控弯曲质量进行有效的预测,提高弯曲管件零件设计效率。      

一种用于RM不稳定性研究的竖直环形激波管的设计与验证

设计并加工了一套竖直环形同轴无膜激波管,可用于环形汇聚激波诱导下的Richtmyer-Meshkov 不稳定性实验研究。与前人工作相比,本文在流体界面的形成以及流场的观测方法上做了较大的改进。通过实验和数值方法,对该竖直激波管产生的环形柱状汇聚激波的参数进行测量和分析,验证了同轴激波管形成柱状汇聚激波方法的可行性和可靠性。在界面形成方面,采用细丝约束肥皂膜技术形成正八边形气体界面,并利用数值方法考察了细丝对界面发展的影响。结果表明在界面发展的前期,细丝的影响几乎可以忽略。利用连续激光片光结合高速摄影相机对流场进行观测,获得了正八边形air/SF6气体界面在环形汇聚激波及其反射激波冲击下的演化过程,并与数值结果进行了对比,获得了较好的一致性,进一步验证了汇聚激波的对称性以及细丝约束肥皂膜技术用于形成多边形气体界面的可靠性。     

Coronal Hole Oscillations as inferred from SDO/AIA data

With high temporal resolution (12 s) of about two hours duration, data of a coronal hole structure in 171 Å$\AA$, 193 Å$\AA$ and 211 Å$\AA$ taken from SDO/AIA images is considered for examination of oscillations. After estimating the total DN counts of a whole coronal hole structure in three wavelength bands, the resulting time series are subjected to FFT and wavelet analysis. Significant periods in all the three wavelength bands are detected that are mainly concentrated around 500 s as a fundamental mode and its odd (167, 100, 71, 56, 46, 39, 33, 29, 26, 24 s) harmonics. Computed phases in all the three wavelengths band are estimated to be constant.