基于现代教育技术的虚拟实验系统构建模式的研究

虚拟实验系统是现代教育技术和实践教学理论相结合的产物。通过对网上虚拟实验系统构建技术的全面分析和总结 ,将适合于高职高专院校的虚拟实验教学系统的构建模式划分为模拟演示型、系统仿真型、虚拟操作训练型和真实测量型等四种类型 ,并给出了对于高职高专院校具有重要的意义的构建方案、实现思路、适用场合和应用案例     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

三维内转式进气道对双旁进气飞行器力矩特性的影响分析

为了研究三维内转式进气道对飞行器力矩特性的影响规律,对一系列设计状态为Ma=6.5的内转式进气道展开力矩特性研究。对不同布局形式,进气形式以及基准流场中心体的内转式进气道对飞行器力矩特性的影响展开分析研究。研究结果表明,对于内转式进气道而言,有连接板的水滴型进气道双侧布局力矩特性较优,且容易满足飞行器总体需求;布局形式对进气道的力矩特性影响最显著,进气形式对侧滑力矩的影响比基准流场中心体影响更明显,而抬头力矩和滚转力矩受基准流场中心体影响更加突出;中心体在0~0.1Rs(Rs为基准流场入口半径)变化时,抬头力矩变化不大,而在0.1~0.2Rs抬头力矩变化明显。     

倒立摆系统的建模与积分滑模控制

在研究了倒立摆系统动力学模型的基础上,提出了一种积分滑模变结构的控制方法。通过设计积分性质的非线性滑模面,可以减少系统静差,提高控制精度,系统鲁棒性能获得了很好的保存。仿真证明,该方法能够在较短时间内实现系统的稳定,提高系统的控制精度,使倒立摆系统具有更高的稳定性和鲁棒性。     

脉冲雷达凝视模式下低轨碎片相对运动特征分析

脉冲雷达凝视模式是一种探测低轨小碎片的重要方式,其中低轨碎片与雷达的径向运动关系是碎片统计分析的基础.为推算碎片相对雷达的运动特征,基于坐标系的相互转换,先利用雷达测站信息,得到可见碎片在地惯坐标系下的轨道信息;再逆向将目标不同时刻的位置转换至测站坐标系下,得到目标的径向运动特征.在不同要素（雷达波束指向、雷达仰角、测站纬度、目标距离）下,仿真及对比分析了各个参数对速度模糊度、雷达可见性等的影响,得出在凝视模式下目标相对雷达近似做径向匀加速运动,这为后续试验工作提供有力的依据.     

大气层内导弹姿态控制方法研究

本文以大气层内导弹为研究对象,对导弹的姿态控制方法进行研究.根据大气层内导弹运动方程组及空气动力方程等得出导弹的姿态控制系统数学模型.由于导弹的姿态控制数学模型是强耦合、非线性的,因而在控制器设计之前,采用小扰动理论进行线性化处理,得到俯仰、偏航、滚转三个通道的传递函数.针对特征点,采用PD控制方法分别设计三通道的控制律,在此基础上,进一步设计了基于增益调度的PD控制规律.仿真结果表明,提出的姿态控制方法可以实现大气层内导弹的姿态控制,满足指标要求.     

基于滑模自适应控制的不确定混沌系统修正函数投影同步

研究了一类不确定混沌系统的修正函数投影同步。首先,设计了一类滑模曲面;基于该曲面设计了同步控制器,并采用自适应技术设计了自适应律对不确定参数进行逼近。在一定条件下,该同步控制方案可以实现2个不确定异结构混沌系统的修正函数投影同步。然后,为保证合适的控制量,对控制增益进行了优化。从同步效果来看,所设计的控制器对混沌系统的不确定项的影响具有较强的鲁棒性。最后,数值仿真验证了该控制器的有效性和可行性。     

滑动运行继电式激光制导系统

 继电控制式激光制导系统的简单性使它具有高可靠性、低成本等优点。而系统自振使得弹着点散布大,降低了制导精度。将滑动运动模态引人系统,使其变成滑动运行的继电控制方式。结果,弹着点散布压缩,制导精度提高,而且保持了原系统的优点。介绍了该系统的组成,分析了提高制导精度的原理,并提供一些仿真结果。