基于滑模自适应控制的不确定混沌系统修正函数投影同步

研究了一类不确定混沌系统的修正函数投影同步。首先,设计了一类滑模曲面;基于该曲面设计了同步控制器,并采用自适应技术设计了自适应律对不确定参数进行逼近。在一定条件下,该同步控制方案可以实现2个不确定异结构混沌系统的修正函数投影同步。然后,为保证合适的控制量,对控制增益进行了优化。从同步效果来看,所设计的控制器对混沌系统的不确定项的影响具有较强的鲁棒性。最后,数值仿真验证了该控制器的有效性和可行性。     

滑动运行继电式激光制导系统

 继电控制式激光制导系统的简单性使它具有高可靠性、低成本等优点。而系统自振使得弹着点散布大,降低了制导精度。将滑动运动模态引人系统,使其变成滑动运行的继电控制方式。结果,弹着点散布压缩,制导精度提高,而且保持了原系统的优点。介绍了该系统的组成,分析了提高制导精度的原理,并提供一些仿真结果。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

Gaussian mixture model based adaptive control for uncertain nonlinear systems with complex state constraints

This paper addresses an uncertain nonlinear control system problem with complex state constraints and mismatched uncertainties. A novel Gaussian Mixture Model(GMM) based adaptive PID-Nonsingular Terminal Sliding Mode Control(NTSMC)(GMM-adaptive-PID-NTSMC)method is proposed. It is achieved by combining a GMM based adaptive potential function with a novel switching surface of PID-NTSMC. Next, the stability of the closed-loop system is proved.The main contribution of this paper is that the GMM meth...     

制导航空炸弹变结构控制器设计

针对制导航空炸弹的滚转通道,设计了一种具有线性部分变结构控制器。基于弹体模型的时变特性,该控制器首先设计切换函数以确定滑动模态动特性,附加以参数变化范围内的定常模型为对象的线性部分用以控制趋近模态。对某型号制导炸弹设计变结构控制律,仿真结果表明能较好地适应系统的参数变化,提高控制精度,系统具有良好性能。     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.     

飞机电静液作动器滑模 PID控制器设计

在多电飞机应用环境中,由于电静液作动器（Electro Hydrostatic Actuator,以下简称EHA）系统本身的强非线性与承载交变动载荷的不确定性,简单PID控制无法达到理想控制效果。提出了滑模 PID复合控制,电机电流环和转速环构成控制系统内环,以PI控制器实现电机调速;作动筒位置环为外环,以滑模控制提升系统的快速性和鲁棒性。建立了EHA数学模型,并设计了滑模控制器结构。仿真结果表明,滑模 PID复合控制方法能有效地消除超调和减小跟随误差,实现对EHA位置的精确控制。