波音747-400F货机侧货舱门操作系统故障分析与维护

波音747-400F侧货舱门操作系统的故障关系到飞机能否正常装卸货物,对减少过站时间、避免延误、提高航空公司运力都有一定影响。本文从该系统的功能特点和故障数据统计出发,对飞机侧货舱门操作系统的常见故障进行全面分析,并根据分析结果提出相应的航线和工程维护措施。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

Conceptual design and flight test of two wingtip-docked multi-body aircraft

To overcome the drawbacks such as large wing deformations, poor performance encountering gusts, limits in taking off and landing, inconvenience of transportation of High-Altitude Long-Endurance (HALE) Unmanned Aerial Vehicles (UAVs), a new conceptual aircraft called wingtip-docked Multi-Body Aircraft (MBA) has attracted lots of attentions. Aiming to investigate the feasibility of this concept, two UAV models were designed, manufactured and connected by a wingtip-docking mechanism, which only allows the relative roll motion between the two aircraft. The trim solution of the two connected aircraft is firstly obtained by solving the developed nonlinear flight dynamic equations, followed by the stability analysis based on the linearized model. The results show that the connected aircraft is inherently unstable and cannot fly without a reasonable flight control system. A set of Proportional-Integral-Derivative (PID) control laws was then developed and implemented in the two experimental aircraft. The success of the flight tests show that the flight control can effectively eliminate the unstable motion and the wingtip-docked MBA is controllable and feasible.     

硅烷偶联剂在防热涂料中的应用前景分析北大核心CSCD

硅烷偶联剂作为一种重要的处理剂,广泛应用于涂料、橡胶、塑料等领域。本文综述了硅烷偶联剂的结构特点和作用机理,介绍了硅烷偶联剂在常用涂料领域的几种典型应用,主要包括基体树脂增容、颜填料表面改性、涂层与基材连接,讨论了不同使用条件下影响硅烷偶联剂效果的因素,并对硅烷偶联剂在防热涂料中应用的发展趋势进行了展望。     

高性能聚合添加剂作用机理的探讨

润滑油的高性能化,通用化是其发展的主要方向。高性能化依赖于高性能添加剂的研究、研制和复配技术。聚合添加剂具有不与其体反应的特性。     

乙酸铈晶体的红外光谱与热分析

本文制备了乙酸铈品体,EDTA络合滴定法测定其中铈的含量,利用傅立叶变换红外光谱仪对其进行了红外光谱分析,利用高温综合热分析仪对其进行了热重和差热分析,讨论了乙酸铈晶体在空气气氛中的热分解机理。     

飞机复杂蒙皮拉形数值模拟系统开发及关键技术研究

针对飞机复杂蒙皮拉伸成形特点,基于静态隐式算法开发了复杂蒙皮拉形数值模拟系统STRETCH FORM。系统分为前置处理、核心求解和后置处理3个模块。介绍了系统各模块的主要功能以及机构运动、静态隐式有限元算法和接触搜索算法等关键技术理论。利用商业软件MARC和PAM STAMP进行了S形蒙皮拉形的模拟计算对比,并对某型号机的进气道蒙皮零件进行了生产验证,结果表明系统具有较高的可靠性和计算精度。     

冷轧无间隙原子钢中的微带生成机理

分析了冷轧体心立方金属中微带的形成原因.基于塑性变形理论,运用Taylor模型和Bishop＆Hill最大功原理,计算了变形体心立方晶体中滑移系上的切应变分布.计算结果表明,冷轧时当晶粒的轧向平行于晶粒的某些特定取向时,大量的局部切应变将集中产生在一个滑移面上并在此形成微带.这一高度局域性的切应变是形成剪切带的原因.此时,剪切带与轧制方向之间夹角为30°.另外,微带呈片状是双交滑移的结果,透射电子显微镜观察到的剪切带所在晶粒的取向和所在滑移面证实了这一微带的形成机制.