超临界碳氢燃料蒸汽重整一维模型研究

为了获得关键参数对超临界碳氢燃料蒸汽重整化学热沉分布特性的影响,建立了超临界碳氢燃料蒸汽重整非稳态一维计算模型,通过与实验数据的对比验证了模型的准确性,并基于该模型采用RP-3的四组分替代模型对RP-3蒸汽重整过程中入口流速、压力和含水量等关键参数对热沉沿流向分布特性的影响进行了研究。结果表明：随着入口流速的增加,蒸汽重整反应化学热沉的峰值减小,且出现峰值的位置逐渐向出口移动。随着压力的升高,相同位置处的化学热沉都减少,但是出现峰值的位置不变。在入口含水量由5%增大到12%的过程中,微通道同一位置处的化学热沉增大,且化学热沉的最大值也是增大的,峰值出现的位置向微通道出口移动。     

吸热型碳氢燃料热沉的测定

介绍了一套自制的热导式高温量热系统,热量常数可用电标定法测定。用此仪器可测定各种吸热型碳氢燃料在各种条件下的热沉,用于吸热型碳氢燃料的筛选,为吸热型碳氢燃料的研究提供可靠的热化学数据。用这套装置测定了两种吸热型碳氢燃料在７００°Ｃ的热沉,与文献值接近。     

Y形构形微通道流动换热特性的数值分析

针对矩形芯片提出了Y形构形微通道的芯片内部冷却结构,通过三维数值计算比较了Y形构形微通道与传统直微通道中的流体层流流动和换热特性,并对Y形构形微通道的重要结构参数进行了优化.研究表明:在相同对流换热面积和水利直径的条件下,Y形构形微通道具有比直微通道更高的传热效率和更低的进出口压降,可以满足高热负荷需求.在研究范围内通道级数为3级、分叉角度为60°、分支个数为2时,散热器的综合换热性能最好.以上结论为Y形构形微通道的结构设计提供了重要依据.     

缝纫/RFI层合板单钉连接性能试验研究

通过对不同铺层及不同缝纫角度的缝纫／RFI层合板的单钉单剪连接强度试验,了解到缝纫针脚位置对缝纫层合板机械连接性能有显著的影响。当针脚距离钉孔受挤压边缘较近时,缝纫层合板的挤压破坏强度低于普通的层合板,只有当针脚在钉孔挤压区外或距离钉孔受挤压边缘较远时,缝纫层合板才显示出好于普通层合板的机械连接性能。试验结果还表明铺层比对缝纫层合板的机械连接性能也有影响,其规律类似于普通层合板。     

基于有序BDL树集的船舶电网潮流算法及执行时间分析

针对嵌入式船舶电力模拟训练系统在频繁模拟操作指令下对潮流计算的快速性需求以及嵌入式模拟训练系统极其有限的运算资源之间的矛盾,提出一种基于有序BDL树集的船舶电网潮流算法。该算法在常规回推前推法基础上对节点编号进行优化,将多电站船舶电力系统在实际开环运行模式下等效为由多个辐射状电网构成的有序BDL树集,树集中的每个有序BDL树包含单个电站中的主配电板层、配电层和负载层,并把发电机潮流整合入主配电板层,避免了常规潮流算法中节点编号突变问题。对该算法的时间复杂度分析结果及实际运行结果进行比较分析,证明该算法比常规船舶电网潮流算法更优。     

微藻航空燃料的热氧化安定性与热沉

航空燃料安定性和热沉对飞机和发动机工作可靠性、飞机飞行安全及战术性能的发挥有重要作用。利用热重-差热分析联用仪研究了2种典型微藻航油的热氧化安定性和热沉,并与标准航空喷气燃料RP-3进行了对比。结果表明:混合生物油的失重终点温度和最大失重点的温度与标准航空喷气燃料RP-3相比均向高温区移动。在失重区间内,除了物理热沉还有化学热沉的贡献。在热重曲线中定义了2个无量纲参数:引发温度和燃尽指数,引发温度表征起始裂解温度,燃尽指数表征沉积特性。2个参数结合可以较好地诠释燃料的热安定性和热沉。球等鞭金藻油高碳数烷烃在提高热沉基础上导致碳沉积的形成,但小球藻油在热沉提高的基础上,并没有形成碳沉积。说明通过有效控制高碳数烷烃分配比例增加其热沉并控制其积碳在理论和技术上是可行的。      

使用太阳模拟器进行热平衡试验的附加外热流影响分析

航天器的结构复杂化与表面热光学性能差异,使得航天器热平衡试验中对大型太阳模拟器的需求越来越大。文章根据离轴式太阳模拟器的结构,分析了使用太阳模拟器进行热平衡试验时,真空容器中附加外热流的来源及其对试验的影响,并通过建立热控星模型和容器与热控星的联合模型进行仿真计算,给出温度分布结果,进而提出相应的试验设计改进建议。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

A Fast Global Node Selection Algorithm for Bearings-only Target Localization

In the target tracking, the nodes aggregate their observations of the directions of arrival of the target. The network then uses an extended Kalman filter （EKF） to combine the measurements from multiple snapshots to track the target. In order to rapidly select the best subset of nodes to localize the target with the minimum mean square position error and low power consumption, this paper proposes a simple algorithm, which uses the location information of the target and the network. The lower botmd of localization error is utilized according to the distances between the target and the selected active nodes. Furthermore, the direction likelihoods of the active nodes is predicted by way of the node/target bearing distributing relationships.     

面向航空节点的IP/LEO卫星网络移动性管理方法(英文)

Taking into chief consideration the features of aviation nodes in satellite networks, such as high moving speed, long communication distance, and high connection frequency, this article proposes an aviation-oriented mobility management method for IP/low earth orbit （LEO） satellite networks. By introducing the concept of ground station real-time coverage area, the proposed method uses ground-station-based IP addressing method and cell paging scheme to decrease the frequency of IP binding update requests as well as the paging cost. In comparison with the paging mobile IP （P-MIP） method and the handover-independent IP mobility management method, as is verified by the mathematical analysis and simulation, the proposed method could decrease the management cost. It also possesses better ability to support the aviation nodes because it is subjected to fewer influences from increased node speeds and newly coming connection rates.