Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

平板式预膜喷嘴初次雾化特性试验

为深入了解平板式预膜喷嘴初次雾化特性,试验研究不同进口条件对平板式预膜喷嘴初次雾化特性的影响规律。试验采用了背光照明和片状激光照明相结合的高频拍摄手段分别获得液膜俯视和侧视破碎形态,同时运用本征正交分解(POD)法和液膜边缘定位等分析方法进行光学图像结果后处理,获得表征平板式预膜喷嘴初次雾化特性三个物理量:液膜波动频率、破碎距离和横向不稳定波长。试验结果表明:①通过分析侧视和俯视破碎形态,平板式预膜喷嘴液膜破碎形态可分为三类:末端破碎、波浪脱落和表面剥离,进口韦伯数对预膜喷嘴破碎形态的影响占主导地位;②把POD法和液膜边缘定位方法等相结合方法应用到高频非接触光学喷嘴雾化图像的后处理分析中,是一种非常有效的数据后处理方法;③液膜初次雾化特性主要受到进口韦伯数和气液动量比的影响,破碎距离和横向不稳定波长都随进口韦伯数的增加而降低,液膜表面不稳定波动频率随进口韦伯数的增加而增加,所获得的经验关系式与试验数据吻合较好。所获得的进口参数对液膜破碎形态和雾化特性的影响规律为喷嘴后续优化设计提供了依据。     

脉冲爆震燃烧室出口燃气能量分布特性

为了提高脉冲爆震燃烧室出口燃气能量转换效率,采用数值计算方法,研究了带气动阀和爆震增强结构的脉冲爆震燃烧室出口燃气能量分布特性,结果表明:脉冲爆震燃气的膨胀过程先后经历一次膨胀、二次膨胀和过度膨胀3个阶段,单个周期内二次膨胀阶段的时间和能量占比最大;燃烧室出口燃气压力势能、动能、内能和能流密度的分布主要受燃气压力的影响,且变化规律与燃气压力一致;一次膨胀阶段燃气增加的压力势能、动能、内能分别占单个周期的479%、259%、251%;二次膨胀阶段燃气增加的压力势能、动能、内能分别占单个周期的502%、576%、581%。     

Cross-sectional deformation behavior of double-ridged rectangular tube with fillers in different stages of H-typed bending

The bent double-ridged rectangular tube (DRRT) with high forming quality is helpful to improve the microwave transmission accuracy. For reducing the cross-sectional deformation in the H-typed bending process, in addition to using rigid mandrel to support the inside of tube, ridge groove fillers are also added to restrict the deformation of ridge grooves. Because of the change of stress and strain state of bent tube in bending, rigid mandrel retracting and specially twice-springback stages, and the springback of fillers, the cross-sectional deformation of tube in each stage may be different. Therefore, based on the ABAQUS platform, the finite element models (FEM) for H-typed bending, mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated. It is found that, for the height and width deformation of tube and spacing deformation of ridge grooves, retraction of mandrel can make the distribution of these deformations more uniform along the bending direction. The first springback can reduce these deformations significantly, which should be emphasized. But the second springback only increases them by less amount, which can be ignored. The smaller height deformation of ridge groove and filler can be neglected.     

化学非平衡流动对超燃冲压发动机尾喷管性能的影响

采用RNGk-ε湍流模型和有限体积方法数值求解有组分的守恒形式Navier-Stokes方程,针对设计的超声速燃烧冲压发动机单斜面膨胀喷管,采用氢氧七组元八反应模型,数值模拟不同高度、不同来流马赫数条件下的喷管流场和性能.计算结果表明,喷管内的进一步燃烧对燃烧室起到了一定的补燃作用,对喷管性能影响较大.化学非平衡状态下,喷管推力特性和升力特性显著提高.超燃冲压发动机尾喷管的性能研究,应考虑化学非平衡流动的影响.      

应用PIV技术测试模型环形燃烧室流场

采用粒子图像测速仪(PIV)测量带双级旋流器模型环形燃烧室内冷态和燃烧流场,试验研究不同进口气流温度对其冷态和燃烧流场内回流区的形成以及气流速度分布的影响,试验结果表明:燃烧室燃烧流场内回流区长度要比冷态流场短,燃烧流场的脉动速度明显大于冷态流场;另外随着进口气流温度增加,燃烧室冷态和燃烧流场的回流区长度都稍有减少.      

基于驻涡燃烧室的贫油熄火经验关系式初探

 驻涡燃烧室（TVC）与传统旋流燃烧室相比采用不同稳焰方式。在前期试验研究的基础上对其贫油熄火(LBO)性能进行归纳总结,参考并与Lefebvre基于化学反应的贫油熄火经验关系式相比较,提出适用于采用煤油为燃料、蒸发管方式供油的驻涡燃烧室的贫油熄火经验关系式。针对驻涡燃烧室提出的贫油熄火经验关系式包含了蒸发管雾化性能、主流气流量和凹腔卷吸气流量等因素,对比经验关系式的预测结果与试验结果,最大误差在15%以内。     

流向涡与斜激波相互作用的试验研究和数值模拟

为研究流向涡与斜激波相互作用在超声速燃烧中的应用,进行了由翼产生的流向涡与楔块产生的二维斜激波相互作用的燃烧室冷流试验研究.在不同激波强度下,纹影仪捕捉到了强、中、弱不同的涡/波作用现象.仿真与试验结果符合得较好.试验结果表明:对马赫数为2.3流场,在翼攻角10°时,能产生强流向涡,此工况下,锲角越大,涡/波作用越强.仿真结果表明:马赫数对涡/波作用影响较大,总压影响不明显,总温可影响亚声速回流区的尺寸.      

航空发动机涡轮转子叶片-盘耦合共振特性分析

首先使用UG软件对某型航空发动机涡轮转子单个叶片和叶片-轮盘进行三维实体建模;然后应用有限元ANSYS软件计算不同边界条件下单个叶片和叶片-轮盘在典型转速下的固有频率及振动特性;最后根据计算结果绘制Campbell图,并进行频率裕度和共振特性分析。