变化姿态角下的相位变化率无源定位方法研究

无源定位技术有着广阔的应用前景。在现有单站无源定位方法的基础上 ,介绍了相位变化率定位法。该方法利用观测平台上两个相互正交的相位干涉仪接收目标辐射电磁波的相位获取目标的方向信息 ,利用对应的相位变化率获取目标的径向距离信息 ,从而实现对目标的实时高精度定位。提出了在空中观测平台发生飞行姿态变化情况下的定位求解思路 ,即利用姿态变化条件下的测量数据直接求出目标在姿态变化前的原始载机坐标系中的位置。文中给出了这一思路下相应的定位表达式并引入修正增益扩展卡尔曼 (MGEKF)算法对原始定位结果进行滤波处理。仿真结果表明 ,该方法是一种发展前途较好的单站无源定位方法     

某蒸发式稳定器燃烧特性及供油匹配数值研究

为了研究一种适用于亚燃冲压发动机燃烧室的蒸发式火焰稳定器方案,采用PDF燃烧模型对其燃烧特性及供油匹配进行了流动及两相燃烧数值模拟与分析,重点研究了不同主燃区/局部供油匹配以及不同主燃区供油浓度分布等对燃烧性能的影响,获得了燃气温度峰值与均匀性相对优化的供油方案。     

基于二维单基线的单星高精度无源定位算法

针对长短基线干涉仪定位系统设备量大、系统复杂的问题,提出了基于运动学原理的单星高精度无源定位技术。以模糊相位差和相位差变化率为观测量,并采用三通道二维单基线阵列构型,充分利用长基线相位差定位精度高的特点,并结合相位差变化率的无模糊特性,通过粒子群改进算法实现高精度的定位。仿真结果表明,该算法定位精度高,定位性能接近CRLB。     

FIELD STUDIES OF SINGLE POINT IMPACT ON LIQUEFIABLE SOIL FOUNDATION OF HIGHWAY

A highway in the floodplain of the Abandoned Yellow River in the north of Jiangsu Province is recently remediated to reduce liquefaction potential using the dynamic compaction（DC） method of densification of in-place soils. Firstly, the liquefaction potential of the soil at the project site is analysed according to the code of seismic de- sign. Then the in-situ single point impact tests are performed on the liquefiable soil. Settlement of crater, excess pore pressure, ground heave and lateral deformation under DC impact are measured and analyzed. Subsequently, the standard penetration test （SPT） and cone penetration test （CPT） are used for investigating the compaction ef- fectiveness. At last, the improvement effect of DC is discussed according to the technical specification of dynamic consolidation to ground treatment. The investigation results indicate that the DC technique is an effective way for remediating liquefiable soil in highway engineering practice.     

多斜孔壁与机加环气膜冷却燃烧室面换热特性数值研究

数值研究了在燃烧室实际工作条件下,多斜孔壁冷却燃烧室和机加环气膜冷却燃烧室的流动、换热特性,比较分析了内、外壁温度场以及冷却流量的变化.研究发现,采用多斜孔壁后,壁面冷却效果得到强化,相比机加环气膜冷却燃烧室,燃烧室前段壁温略有升高,而后段受到气膜冷却效果增强的影响,壁面温度有所降低,壁面温度梯度明显减小.流量系数明显减小,冷却空气量降低23%,用于组织燃烧用气量增加.多斜孔壁冷却技术可以为高温升燃烧室的发展提供有效的冷却技术.      

火焰筒压力损失对贫油熄火特性和燃烧效率的影响

以3.0%火焰筒压力损失火焰筒作为基准,分别设计了2.5%和2.0%火焰筒压力损失的火焰筒,通过试验研究火焰筒压力损失对贫油熄火性能及燃烧效率的影响.在模拟慢车状态下,低压力损失方案均比基准方案的贫油熄火油气比低,2.5%方案的贫油熄火油气比最低;在模拟高温高压状态,3种方案火焰筒燃烧效率对火焰筒压力损失不敏感.综合比较地面起动点火试验结果,在该基准上将火焰筒压力损失降低至2.5%不会对燃烧室综合燃烧性能造成不利影响.      

CFD Study of NO_x Emissions in a Model Commercial Aircraft Engine Combustor

Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics (CFD) is utilized as the powerful design approach. In this paper, Reynolds averaged Navier-Stokes (RANS) equations of reactive two-phase flow in an experimental low emission combustor is performed. The numerical approach uses an implicit compressible gas solver together with a Lagrangian liquid-phase tracking method and the extended coherent flamelet model for turbulence-combustion interaction. The NOx formation is modeled by the concept of post-processing, which resolves the NOx transport equation with the assumption of frozen temperature distribution. Both turbulence-combustion interaction model and NOx formation model are firstly evaluated by the comparison of experimental data published in open literature of a lean direct injection (LDI) combustor. The test rig studied in this paper is called low emission stirred swirl (LESS) combustor, which is a two-stage model combustor, fueled with liquid kerosene (RP-3) and designed by Beihang University (BUAA). The main stage of LESS combustor employs the principle of lean prevaporized and premixed (LPP) concept to reduce pollutant, and the pilot stage depends on a diffusion flame for flame stabili-zation. Detailed numerical results including species distribution, turbulence performance and burning performance are qualita-tively and quantitatively evaluated. Numerical prediction of NOx emission shows a good agreement with test data at both idle condition and full power condition of LESS combustor. Preliminary results of the flame structure are shown in this paper. The flame stabilization mechanism and NOx reduction effort are also discussed with in-depth analysis.     

Design and Performance of an Improved Trapped Vortex Combustor

 A trapped vortex combustor (TVC) has been a very promising novel concept for it offers improvements in lean blow out, altitude relight, operating range, as well as a potential to decrease NO_x emissions compared to conventional combustors. The present paper discusses the improved designs of the new combustor over the prior ones of our research group, including that: a) the overall dimensions, both axial and radial, are reduced to those of an actual aero-engine combustor; b) the air flow distribution is optimized, and especially 15% of the air is fed into the liner as cooling air; c) a straight-wall diffuser with divergence angle 9癷s added. A series of experiments (cavity-fueled only, under atmospheric pressure) has been conducted to investigate the performance of the improved TVC. Experimental results show that at the inlet temperature of 523 K, the inlet pressure of 0.1 MPa, stable operation of the TVC test rig is observed for the Mach number 0.15-0.34, indicating good flame stability; the combustion efficiency obtained in this paper falls into the range of 60%-96%; as the total excess air ratio increases, the combustion efficiency decreases, while the increase of the inlet temperature is beneficial to high combustion efficiency; besides, the optimal Mach numbers for high combustion efficiency under different inlet conditions are confirmed. The outlet temperature profiles feature a bottom in the mid-height of the exit. This paper demonstrates the feasibility for the TVC to be applied to a realistic aero-engine preliminarily and provides reference for TVC design.     

亚燃冲压模型燃烧室高空负压试验

为了验证亚燃冲压燃烧室在高空负压条件下稳定工作的能力,设计了带蒸发式值班火焰稳定器与直射式喷油装置的亚燃冲压模型燃烧室,对该模型燃烧室进行了冷态流阻试验、贫油熄火边界试验以及不同截面燃烧效率试验研究。研究结果表明,试验件的冷态流阻系数略大于1,冷态总压恢复系数0.98以上;蒸发式火焰稳定器贫油熄火边界较宽;两截面燃烧效率最低相差6%,最高相差19%,在高空负压条件下,增加燃烧段长度能显著提高燃烧效率。     

航空发动机燃烧室声载荷自激励门限自回归仿真模型

采用自激励门限自回归分析方法,利用航空发动机环形燃烧室测试数据,得到燃烧室噪声声压时间信号自激励门限自回归仿真模型SETAR（2;1;15,14）,并与控后非门限的自回归滑动平均模型ARMA（6,5）进行了比较,仿真结果表明,误差方差明显降低。