研究原子氧对空间材料效应的氧等离子体试验装置

介绍我所研制成的一台评价原子氧对空间材料效应的高频放电氧等离子体试验装置的结构和性能.对Kapton试样的测试表明:用这种装置试验的结果与美国洛克希德公司装置的测试结果相当.其作用强度相当于200km高度轨道中原子氧作用强度的4倍以上.     

直流电源输出电流监测系统

针对航天器真空热试验中热流模拟系统的故障报警问题,文章阐述了直流电源输出电流监测系统的实用意义、设计思想和控制软件的编制,构建了实验样机,并对监测系统的测试数据及系统误差进行了分析,满足高测试精度的要求,有很好的应用价值。     

舰载机服役环境中微生物的提取及其对 7B04铝合金腐蚀行为的影响

舰载机服役环境恶劣,容易遭受微生物腐蚀。从舰载机油箱和电子元件材料腐蚀产物中取样,进行微生物的分离、提取与鉴定,筛选出 7种典型菌株。通过开路电位(OCP)、电化学阻抗谱(EIS)和动电位极化曲线等电化学测试,初步研究了其中 3种菌对 7B04铝合金腐蚀行为的影响。试验结果表明,假丝酵母菌对 7B04铝合金腐蚀有抑制作用,而鲁氏不动杆菌和副干酪乳酸菌具有促进腐蚀的作用。     

双端供油泵诱导轮与上端泵口卡滞故障分析与预防

通过对调试现场发生的故障现象进行分析和判断，找出整机调试中客观存在的问题，通过采取科学有效的方法与措施，杜绝后续同类故障的持续发生。     

高压液氧供应系统管路设计

高压液氧供应系统是我国压力最高的挤压式液体火箭发动机试验台的关键分系统。在系统设计过程中，通过合理布置管路，设计专用固定支架，采用自然补偿和堆积绝热技术，解决了高压低温推进剂系统管路设计中的难题。该系统顺利通过气密性检查和调试，经多次热试车考核，系统稳定可靠，满足设计要求。     

基于复杂网络的航空制造供应链关键节点识别研究

随着不稳定因素的增加以及航空制造供应链的参与主体增多，航空制造供应链的管理所面临的风险也随之增大。因此针对航空制造供应链网络的风险管理，以复杂网络为工具研究供应链网络中的关键节点识别问题，从而帮助航空供应链提升抗风险能力。通过分析我国航空制造供应链网络现状和特点，提出供应链形成机制并划分供应链层级，对航空制造供应链进行构建及指标界定，对度中心性、介数中心性、接近中心性三种经典中心性算法以及传统K-Shell 分解算法进行加权改进；结合熵值-TOPSIS 法提出一种针对加权网络的供应链关键节点识别算法——WKC 算法，通过构造网络来进行算例分析，验证该种算法的有效性。结果表明：本文提出的WKC 算法原理科学、计算复杂度较低，为航空制造等高端装备制造业供应链的风险管理提供了一定的参考。     

非营利组织参与农村公共产品供给的制约因素研究

在农村公共产品供给多元化的格局下,鼓励非营利组织参与农村公共产品的供给是一种多赢。但现实语境下,非营利组织参与农村公共产品的供给,还存在着组织自身缺陷、经济实力不足、与非营利组织相关的农村公共产品准入机制还不完善,法制还不健全,供给缺少科学合理的决策和激励机制等因素的制约。本文认为,政府组织有必要监管并引导好非营利组织健康稳定发展,并给予必要的帮助与支持,完善相关法律制度建设,建立科学合理的农村公共产品决策和管理制度等,以化解这些制约因素,改善新时期农村公共产品的有效供给。     

Efficiency optimized fuel supply strategy of aircraft engine based on air-fuel ratio control

Accurate fuel injection control of aircraft engine can optimize the energy efficiency of UAV power system while meeting the propeller speed requirement. Traditional injection control method such as open-loop calibration causes instability of fuel supply which brings the risk of power loss of UAV. Considering that the closed-loop control of AFR can ensure a stable fuel feeding, this paper proposes an AFR control based fuel supply strategy in order to improve the efficiency of fuel-powered UAV while obtaining the required engine speed. According to the optimum fuel injection results, we implement fuzzy-PID method to control the set AFR in different situations. Through simulation and experiment studies, the results indicate that, to begin with, the calibrated mathematical model of the aircraft engine is effective. Next, this fuel supply strategy based on AFR control can normally realize the engine speed regulation, and the applied control algorithm can eliminate the overshoot of AFR throughout all the working progress. What is more,the fuel supply strategy can averagely shorten the response time of the engine speed by about two seconds. In addition, compared with the open-loop calibration, in this work the power efficiency is improved by 9% to 33%. Last but not the least, the endurance can be improved by 30 min with a normal engine speed. This paper can be a reference for the optimization of UAV aircraft engine.     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.     

二级摇摆伺服机构供电系统可靠性分析

某型二级摇摆伺服机构要求在地面热试车全过程中由试验台提供稳定可靠的直流电源,原二级摇摆伺服机构供电系统为单一的整流器供电模式,试验过程完全依赖市电进行转换,没有任何其他保障措施,可靠性受到很大影响.为此,提出2种供电方案,通过比较分析系统的可靠性和可能发生的故障,最终选择了整流器和电池组相配合的供电方式.试验测试性能结果表明：这种供电方式完全满足试车任务的需求并具有较高的可靠性.