运输机机翼平面参数快速优化方法

提出了一套机翼平面参数快速优化方法。新方法通过改变优化思路,简化计算模型,合理选择计算方法,有效地提高了优化效率。简要介绍参数优化思想与流程控制,重点阐述优化程序的气动、重量与性能计算模块的算法。以某运输机为算例,优化结果与资料数据吻合,验证了新方法的正确性。     

15-5PH沉淀硬化不锈钢磁粉检测磁痕分析

针对航空15-5PH马氏体沉淀硬化不锈钢在磁粉检测过程中发现的条状、片状和长直磁痕显示进行了总结。分析了不同磁痕显示的特点及微观组织情况,最终确定了磁痕的性质。结合不同热处理状态下的磁特性分析,确立了纯洁度磁粉检测的工艺流程以及磁痕判别方法。研究发现沉淀硬化不锈钢在磁粉检测过程中磁痕显示主要是由铁素体和组织不均匀造成的。研究结论为航空制造过程中沉淀硬化不锈钢的磁粉检测的磁痕判定以及规范的制定提供依据,确保磁粉检测工作的顺利进行。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

综合模块化航空电子系统远程加载技术研究及性能分析

随着飞机航空电子系统综合化程度的提高,软件的部署、加载和更新的复杂度也在逐步提高。传统软件更新后,需要在地面为每个模块进行升级,并将新版本的软件映像文件固化在模块上,这种更新周期长且流程复杂。随着通用模块和应用重构的发展,软件映像需要部署在系统的各个冗余备份节点中,从而使其更新的流程更为复杂。本文针对以上问题提出了基于光纤通道和 ARINC653操作系统的远程数据加载系统,以使系统在上电、重启及重构时可实现从大容量存储模块上远程加载操作系统内核映像、分区应用及自启动功能。在功能实现的基础上,本文对远程加载和本地加载的时间性能进行了分析和比较。     

粒子群算法在装配序列规划中的应用方法研究

将粒子群优化算法引入到装配序列规划中,详细讨论了粒子群算法在装配规划中的数学表示,给出了适应度函数评价方法,并实现了装配干涉矩阵的构建,以发动机化油器装配为例,分析了粒子群算法在装配序列规划中的具体应用.     

基于截尾概率-非概率混合模型的可靠性优化算法

针对工程中截尾概率变量与非概率变量同时存在的情况,给出一种新的截尾概率与非概率混合可靠性模型。在该混合可靠性模型基础上,按照可靠性指标(RIA)法给出双层嵌套可靠性优化模型,并采用改进搜索策略后的ST-Powell优化算法在外层搜索设计变量的最优值,内层采用能保证收敛的改进的有限步长迭代法求解混合可靠性指标。数值算例表明,改进搜索策略后的ST-Powell优化算法的全局寻优性得到显著提升;改进搜索策略后的ST-Powell优化算法与改进的有限步长迭代法相结合求解双层嵌套混合可靠性优化模型的正确性得到验证,且对于非线性程度较高的极限状态函数同样能够得到满足截尾概率与非概率混合可靠性模型指标要求的最优解,并对工程结构算例具有很好的适应性。     

小型无人机气动参数辨识的新型HGAPSO算法

针对小型无人机(UAVs)研制中操稳特性和飞行控制律设计评估对气动参数辨识的需求,提出了一种混合遗传粒子群优化算法(HGAPSO)。该算法以粒子群优化算法(PSO)为主体,在粒子优化路径中,引入遗传算法(GA)的交叉变异操作,增强粒子群跳出局部最优的能力;同时采用Kent映射改进粒子种群的初始化,使初始种群在可行解空间内分布更加均匀,增强全局优化能力。基于仿真结果,依据辨识准度及辨识成功率,对比了HGAPSO、常规PSO和GA优化算法气动参数辨识的结果,然后用蒙特卡洛仿真测试随机观测噪声的影响,结果表明该算法兼备PSO算法高的搜索效率和GA算法的全局优化能力,对随机观测噪声不敏感。最后,通过设计小型UAV试飞示例进行综合应用评价,结果表明:HGAPSO算法基于真实试飞数据进行气动参数辨识取得了满意结果,具有良好的实用性。     

Automatic differentiation based discrete adjoint method for aerodynamic design optimization on unstructured meshes

A systematic methodology for formulating, implementing, solving and verifying discrete adjoint of the compressible Reynolds-averaged Navier-Stokes (RANS) equations for aerodynamic design optimization on unstructured meshes is proposed. First, a general adjoint formulation is con-structed for the entire optimization problem, including parameterization, mesh deformation, flow solution and computation of the objective function, which is followed by detailed formulations of matrix-vector products arising in the adjoint model. According to this formulation, procedural components of implementing the required matrix-vector products are generated by means of auto-matic differentiation (AD) in a structured and modular manner. Furthermore, a duality-preserving iterative algorithm is employed to solve flow adjoint equations arising in the adjoint model, ensur-ing identical convergence rates for the tangent and the adjoint models. A three-step strategy is adopted to verify the adjoint computation. The proposed method has several remarkable features:the use of AD techniques avoids tedious and error-prone manual derivation and programming;duality is strictly preserved so that consistent and highly accurate discrete sensitivities can be obtained; and comparable efficiency to hand-coded implementation can be achieved. Upon the cur-rent discrete adjoint method, a gradient-based optimization framework has been developed and applied to a drag reduction problem.     

核磁共振陀螺高精度磁场驱动技术

核磁共振陀螺（NMRG）是利用激光与核磁共振气室中的碱金属原子和惰性气体原子的相互作用使核子以拉莫尔频率进动,并通过磁场驱动技术对气室磁场实现闭环控制和对剩磁进行补偿来维持核子的共振状态,进而能够检测载体的角速度信息。磁场驱动技术作为磁场闭环控制的重要部分,直接影响核磁共振陀螺的磁场控制精度和稳定性。为了解决核磁共振陀螺磁场控制精度和稳定性不足的关键问题,采用交直流分离设计的压控电流源方案改善磁场驱动问题,基于噪声分析理论对电路进行建模和噪声分析,并通过实验验证对三轴线圈的横向磁场控制精度达±0.046 2 nT,纵向磁场控制精度为±0.003 1 nT,实验证明该技术方案具有较强的工程应用价值。