运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。     

Effects of yaw-roll coupling ratio on the lateral-directional departure prediction and restraint

The experimental data obtained from yaw-roll coupled wind tunnel tests are used for lateral-directional departure prediction, by linearizing the_b model to extract nominal dynamic derivatives at each coupling ratio.The prediction results are compared with those of the existing engineering methods which are based on the conventional aerodynamic derivatives.The comparison shows that the yaw-roll coupling ratio has a great influence on the departure susceptibility.The departure resistance will loss in partial region of the coupling ratio when the angle of attack is higher than a critical value.According to the stable and unstable regions of coupling ratio, a two-segment stability augmentation system with two different feedback gain matrices is obtained by pole-placement method.The two-segment stability augmentation system is used in the simulations of straight and level flight, steady turn, spin recovery and Herbst maneuver.The simulation results are also compared with the applications of a fixed-gain stability augmentation system designed by the conventional aerodynamic derivatives.When the yaw-roll coupling effects are fully considered, the two-segment stability augmentation system is more effective for departure restraint and can provide a better flying quality with less control energy.     

模拟中性大气边界层中污染物传输与扩散的动力相似讨论

文章从湍流雷诺数相等出发,推导出风洞中模拟中性大气边界层动力相似准则一充分发展的湍流中,运动相似的流动动力也相似。文章还讨论了模拟烟流抬升和扩散的相似准则,概述了国内外一些主要实验室应用的近似模拟技术。     

机载风切变系统告警准则研究

根据风切变对飞机飞行影响的机理,以及FAA对CATⅠ类着陆最坏条件下的边界要求,推导了风切变的危险程度判据。通过计算,分析了垂直风切变与水平风切变对飞行性能的影响的异同,并通过对危险判据与性能恶化参数的相关性研究,提出了适用于机载风切变探测告警系统的告警准则。     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

浅析"三大规范"编写

本文较为详细地介绍了中国燃气涡轮研究院“三大规范”编制与实施过程中的目标的确定、总体规划、采取的措施、应用效果、存在的问题及解决方法,可为同行编制“三大规范”提供借鉴和参考。     

压气机叶片气动阻尼的改善设计

针对气动阻尼在强迫响应分析中的应用现状,提出了一种在叶型基本确定的条件下进一步设计气动阻尼的方法.该方法只对叶片基元级的积叠轴做微小的调整,这种调整对叶栅流场气动特性和固有频率的影响很小,可以忽略不计.研究了积叠轴调整对叶片气动阻尼的影响,得出在不需要大量流场计算的条件下,即可判断如何调整叶片积叠轴以达到增加气动阻尼目的的结论.在分析中用振型相似度衡量叶片模态振型与气动阻尼比的关系,相似度越小气动阻尼比越大.      

关于轰燃定义、机理和判据的讨论与分析

通过对常见的几种轰燃定义的对比分析,对轰燃进行了新的定义,认为轰燃是室内火灾发展到一定阶段引起非连续介质着火燃烧的现象;在此基础上,根据燃烧学原理提出了轰燃发生的机理,即可燃挥发份和高温烟气层接触发生的剧烈氧化还原反应;并提出了预测轰燃的通用判据,即火灾时室内其它可燃物热解产生的可燃挥发份迅速和空气混合,达到其着火浓度下限且接触到超过可燃物自燃点的高温烟气层。     

基于电动舵机的健康仿真与评估方法研究

综述了国内外开展飞行器健康相关研究的现状,强调了考虑渐变过程对于健康仿真的重要性。以某型飞行器电动舵机为研究对象,建立了舵机系统的非线性仿真模型。通过分析组成电动舵机各个环节的健康模式与模型参数的映射关系,阐述了建立健康模型开展健康仿真的方法,并结合测点仿真数据和多维向量相似度、遗传算法的原理,提出了健康指标的计算和优化方法,达到健康评估的目的。最后,以simulink环境下的仿真实例对上述方法的可行性进行了初步验证。