气体流场对C／C复合材料CVI致密化效果的影响

以丙烯为碳源气体,研究平板针刺预制体在不同倾斜角放置和不同进气方式条件下化学气相渗透（ CVI）工艺制备C／C复合材料的致密化效果。采用工业CT、浸泡介质法和偏光显微镜对沉积样品的密度分布、开孔孔隙率和织构分别进行表征。沉积102 h后,倾斜17°、前进气条件下试件的密度最高,达到1．45 g／cm－3。结果表明,试样由底端到顶端的密度是有小幅递增的,开孔孔隙率是逐渐减小的。4块试件热解炭的织构以光滑层为主,试样消光角的测量结果表明直立状态和倾斜17°、后进气状态热解炭织构取向度从底部到顶端有增大的趋势,这种织构的增长趋势与锥形回转体扩张段的材料设计相符合。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

Features of the occurrence of the additional stratification on the bottom-side F region over the equatorial location of Trivandrum

The general features of occurrence of an additional layer on the bottom side of F region, referred to as F0.5 layer in the pre noon period, over the magnetic equatorial location of Trivandrum (8.5° N; 77° E; dip lat of 0.5° N) in India during the period from 2004 to 2007 are presented using ionosonde observations. The F0.5 layer has a June (northern summer) solsticial maximum probability of occurrence with secondary maxima during December (northern winter) solstice. The seasonal as well as the day-to-day variability in the occurrence of F0.5 layer as mentioned in this paper seems to be a result of the variations in the amplitude and phases of the tides and gravity waves, and inventory of the metallic ions of meteoric origin. This study brings out an important manifestation of morning time F layer base region dynamics.     

Stability of the seasonal variations in diurnal and semidiurnal components of mid-latitude F2 layer parameters

We report work utilizing 15-min resolution ionospheric data obtained with DPS-4 digisonde in 2003–2011 to study the seasonal variations in amplitudes and phases of the most powerful spectral components of the F2 layer critical frequency (foF2) and peak height (hmF2) fluctuations over Irkutsk (52.5°N, 104.0°E). We show that fluctuations of both parameters contain quasi-harmonic components with periods of T_n = 24/n h (n = 1–7). The number of distinct spectral peaks varies from 3 in summer to 7 in winter. Amplitude and phase characteristics of the diurnal (n = 1) and semidiurnal (n = 2) components is studied using the data sets extracted from the original data sets with band-pass filter. It has been found that the amplitudes of diurnal/semidiurnal foF2 and diurnal hmF2 components are maximum in winter and minimum in summer. Amplitudes of the diurnal components vary gradually; those of the foF2 semidiurnal one, abruptly, thus forming a narrow winter maximum in November–January. The phase (local time of maximum) of the diurnal foF2 component increases gradually by 4–6 h from winter to summer. The phase of the semidiurnal foF2 component is nearly stable in winter/summer and sharply decreases (increases) by 2–3 h near the spring (autumn) equinox. The phase of the diurnal component of hmF2 (local time of minimum) varies slightly between 1130 and 1300 LT; that of the semidiurnal one decreases (increases) by 4–6 h from January to March (from September to November). The results obtained show that the main features of seasonal variations in the diurnal and semidiurnal components of the mid-latitude F2 layer parameters recur consistently during the solar activity growth and decline phases.     

A comparative sporadic-E layer study between two mid-latitude ionospheric stations

Hourly systematic measurements of the highest frequency reflected by the sporadic-E layer (foEs) recorded from January 1976 to June 2009 at the ionospheric stations of Rome (Italy, 41.8°N, 12.5°E) and Gibilmanna (Italy, 37.9°N, 14.0°E) were considered to carry out a comparative study between the sporadic E layer (Es) over Rome and Gibilmanna. Different statistical analysis were performed taking into account foEs observations near the periods of minimum and maximum solar activity. The results reveal that: (1) independently from the solar activity, Es develops concurrently over extended regions in space, instead of being a spatially limited layer which is transported horizontally by neutral winds over a larger area; especially during summer months, when an Es layer is present at Rome, there is a high probability that an Es layer is also present over Gibilmanna, and vice versa; (2) Es layer lifetimes of 1–5 h were found; in particular, Es layers with lifetimes of 5 h both over Gibilmanna and Rome are observed with highest percentages of occurrence in summer ranging between 80% and 90%, independently from the solar activity; (3) latitudinal effects on Es layer occurrence emerge mostly for low solar activity during winter, equinoctial, and summer months, when Es layers are detected more frequently over Gibilmanna rather than Rome; (4) when the presence of an Es layer over Rome and Gibilmanna is not simultaneous, Es layer appearance both over Rome and Gibilmanna confirms to be a locally confined event, because drifting phenomena from Rome to Gibilmanna or vice versa have not been emphasized.     

"伙伴交际法"在高职英语教学中的应用

口头表达能力作为语言综合能力的重要体现之一,在教学中应受到高度重视。然而在我国传统的公共英语教学中,“轻听说、重读写”的倾向造成了不少学生渎写尚可,但张口即结舌的状况。笔者将“伙伴交际法”应用到教学实践中,有效地提高口语教学质量,值得推而广之。     

基于SPF/DB工艺的某翼类构件内部结构优化分析

采用SPF/DB工艺成形的翼类构件,内部结构不仅影响其力学性能,同时决定SPF/DB工艺的可行性。翼类构件在应用SPF/DB工艺成形过程中,内部夹层扩散焊接焊缝处形成筋条,从而增强结构强度,因此中间夹层扩散焊接筋条分布决定了成形后构件内部结构。本文利用有限元软件ABAQUS6.8对不同内部结构的某翼类构件进行静力学分析及超塑成形的数值模拟,得到既满足强度要求又有利于SPF/DB工艺要求的内部结构。     

超声速复杂流动中湍流模型的性能评估

对8°,16°,20°,24°超声速二维压缩拐角进行了数值模拟,系统评估了SA(Spalart-Allmaras), k-ω, SST(Shear Stress Transport)3种工程常用湍流模型对激波/边界层干扰复杂流动的模拟适用能力.对于"弱"干扰、小分离,工程常用湍流模型能够较准确地预测其压力、摩擦力、热流分布,而对于"强"干扰、大分离则会造成较大的偏差.同时,随着分离区的增大,各湍流模型的适用性能差别更加明显,数值方法也有一定的影响.