Compressive properties of homemade carbon fiber composite laminates with delamination defect

Large numbers of aircraft composite structures were researched, and the distribution of delamination sizes and though thickness positions in the composite laminates were investigated. An experiment was conducted to probe into the effect of delamination sizes and through thickness positions on the compressive strengths of laminates with single embedded circular delamination with the most dangerous delamination sizes and positions defined from the distribution. A shell model was established for compressive strength prediction, and the virtual crack closure technique (VCCT) was employed for the strain energy release rate calculation. The finite element (FE) prediction was in good agreement with the experimental measurements, for the predicted compressive strengths stood within 10% error of experimental results. It was observed that the compressive strength was highly effected by the delamination size, while the though thickness position of delamination did not have significant effect on the compressive strength.      

光滑粒子流体动力学的一种并行数值计算方案

在三维超高速碰撞数值计算方面,针对三维光滑粒子动力学（SPH）方法计算量大和耗时长的缺点,文章提出了一种简单直接、易于编程实现的SPH并行计算方案,并简述了该方案的基本思想、任务划分、变量存储、信息传递以及主要计算步骤。最后利用自编并行程序计算了两个超高速碰撞实例,结果表明:针对几百万个粒子,在运算速度为每秒5万亿次的“银河”计算机上申请23个核并行计算,每步约需要8 s,加速比约为10,并行效率约为50%,计算时间显著减少。     

预浸带的快速热压接技术及其搭接性能研究

为解决预浸带缠绕过程中手工搭接效率低的问题,针对原有缠绕设备,设计了一套预浸带自动快速热压接系统。首先分析了预浸带搭接面张力的重要性,并结合基体树脂的粘流特性,从热力学、动力学角度分析了影响搭接界面层搭接性能的主要因素,通过物理实验,分析了时间、温度及搭接长度对预浸带拉伸剪切强度的影响机制。据此,获得适于热压接系统的工艺参数;并对比手工缝接实验,说明该方案的优越性,对复合材料的自动化成型技术具有一定的指导意义。     

Effects of punch size,magnetic field,and magnetorheological elastomers medium on forming T-shaped thin-walled Inconel 718 tubes

This study aims at investigating the impact of using the Magnetorheological Elastomers(MREs) medium to improve the formability of T-shaped Inconel 718 tubes during the bulging process. Besides, the influence of the punch size and the intensity of the magnetic field on the branch height and wall thickness distribution of the T-shaped Inconel 718 tubes are also explored. The results showed that the parts formed by the punch with a length of 5 mm in the pressurization zone have better forming quali...     

浅谈A320系列主起落架外筒难加工点的加工方法

A320系列飞机主起落架外筒是形状不规则零部件,材料为超高强度钢,为难切削加工材料,一些孔径或者孔径的端面出现腐蚀后,需要镗削去除以满足CMM规定的修理要求。为解决此类难加工问题,本文设计了一种通用性强的T型非标BT-50铣刀,操作简单,成本效益高,大大提高了起落架维修能力。     

一种改进的直方图概率多假设多目标跟踪方法

直方图概率多假设跟踪（H-PMHT）方法及其变形泊松分布直方图概率多假设跟踪（P-HPMHT）方法的一个主要缺点是其量测模型仅考虑了背景杂波而没有考虑传感器噪声,从而导致在低信噪比条件下检测概率较低。针对这一问题,提出了一种带传感器噪声模型的H-PMHT方法,通过将传感器噪声引入量测模型,从而明显提高了对低信噪比目标的跟踪检测能力。该方法的计算量与目标数保持线性关系,仍然适用于目标数目较多的情况。仿真实验表明：该方法在误跟踪比率为1‰,信噪比为6 dB时,检测比率可提升近20%,信噪比为3 dB时,可提升近10%。     

带中介轴承的双转子系统振动耦合作用评估

为了评估中介轴承对双转子系统的振动耦合作用,从临界转速位置振型变化、临界转速变化、模态振型与稳态不平衡响应的应变能分布变化、中介轴承受力变化等多角度,阐释双转子耦合振动的表现形式和关联关系,提出了相应的评价指标或评估方法,并以典型燃气涡轮发动机双转子系统为对象,进行了分析评估。结果表明,单转子的模态振型可能在双转子模态振型中表现为3种形式,一一对应出现、重复出现或耦合出现,对应的临界转速及应变能分布也会随之产生相应的变化;中介轴承受力在临界转速位置出现峰值,而应变能分布变化最大的转速位置与系统临界转速位置不一致,同时还受不平衡激励位置影响;各单元应变能占比变化量随转速变化曲线可详细分析特定不平衡激励下系统应变能分布变化情况。所提方法可为双转子-中介轴承系统的设计、故障诊断提供参考。     

基于匹配渐进展开的跳跃式再入解析预测-校正制导律设计

为了适应低升阻比飞行器再入返回的大航程要求,针对大气跳跃再入飞行环境复杂并难以直接获得解析解的特点,基于匹配渐进展开法设计了一种跳跃式再入解析预测-校正制导方法。首先分析了低升阻比飞行器大气跳跃再入轨迹的飞行剖面和制导分段方法;然后分别推导了其运动方程以重力作用为主导的外解和以气动力作用为主导的内解的渐进展开形式,并通过匹配获得了统一的封闭解析表达式;接着基于此解析解实时预测飞行器的剩余航程,并通过不断迭代升阻比垂向分量以满足最后的落点精度;最后针对跳跃再入飞行的不同阶段设计了不同的制导策略以获得最终的倾侧角指令。仿真结果表明采用跳跃式再入返回技术,阿波罗指令舱的航程能够达到8 348 km,而解析预测-校正制导律的落点精度为0.338 km,证明了此方法的有效性。     

The classical Laplace plane as a stable disposal orbit for geostationary satellites

The classical Laplace plane is a frozen orbit, or equilibrium solution for the averaged dynamics arising from Earth oblateness and lunisolar gravitational perturbations. The pole of the orbital plane of uncontrolled GEO satellites regress around the pole of the Laplace plane at nearly constant inclination and rate. In accordance with Friesen et al. (1993), we show how this stable plane can be used as a robust long-term disposal orbit. The current graveyard regions for end-of-life retirement of GEO payloads, which is several hundred kilometers above GEO depending on the spacecraft characteristics, cannot contain the newly discovered high area-to-mass ratio debris population. Such objects are highly susceptible to the effects of solar radiation pressure exhibiting dramatic variations in eccentricity and inclination over short periods of time. The Laplace plane graveyard, on the contrary, would trap this debris and would not allow these objects to rain down through GEO. Since placing a satellite in this inclined orbit can be expensive, we discuss some alternative disposal schemes that have acceptable cost-to-benefit ratios.     

阻尼网特性数值模拟

依靠经验公式和工程估算等传统方法,无法对阻尼网性能进行精确评估.为确定阻尼网压力损失系数和降湍性能,采用计算流体力学方法,结合适当的边界条件,对阻尼网进行了模拟.使用数值模拟能够得到不同开孔率阻尼网在不同雷诺数、不同入射方向、不同目数的损失系数,与试验结果更为接近,在30°~45°大角度入射时得到的损失系数更为精确;在入射气流与阻尼网平面呈一定夹角时,阻尼网后的气流压力和速度呈现脉动趋势,传播距离大约为100d;在雷诺数小于40时流动保持层流状态,扰动传播距离为50d,此时降湍效果最好,随雷诺数增加,扰动传播距离增加至400d;在流动未失稳时,开孔率越低,降湍效果越明显,开孔率低于0.5时流动容易失稳;开孔率保持不变,随目数增加阻尼网损失系数增加明显,降湍能力提升.因此可以根据数值模拟结果选择阻尼网的最优参数.