基于激光的便携式飞机装配接缝质量检测仪及应用

介绍了一种基于激光的便携式接缝质量检测仪的工作原理及硬件组成。使用该检测仪对飞机缝隙和台阶阶差进行了测量,通过与人工测量进行对比验证,证明了该装置可实现对特征三维信息的快速自动检测,工作准确可靠。     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.     

激光器性能综合测试设备研制

介绍了激光器的主要性能指标,根据实际需要进行了激光性能测试设备的研究,提出了一种周全的激光性能测试设备研制方案,对该设备的结构设计、光路设计、以及测试方法作了详尽论述。设备中利用两对相互垂直的P分光镜和S分光镜以补偿偏振光在45°面上透反射率不同而造成的测量误差,进一步保证了激光能量测试的准确性。误差分析结果表明该设备满足实际应用中对激光器性能的测试要求。     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

激光熔化沉积Ti-6Al-2Zr-Mo-V钛合金组织特征研究

采用激光熔化沉积快速制造工艺直接成形Ti-6Al-2Zr—Mo—V合金板材。激光熔化沉积过程中合金粉末充分熔化并在液态均匀混合以得到成分均匀、全致密的组织。SEM分析表明,激光沉积Ti-6Al-2Zr-Mo—V合金具有均匀细小的α／β双相片层组织,且片层取向随机多样,分布均匀。其组织特点与激光沉积过程中的快速凝固和固态相变有关。解释了其特征组织的形成机理,并讨论了其沉积层组织特征对性能的影响。     

涡轮喷气CO_2气动激光器概念研究

通过分析航空发动机和燃烧驱动CO2气动激光器的相似性,探讨了将航空发动机改装成CO2气动激光器的可行性.提出了涡轮喷气CO2气动激光器的概念和基本框架,分析了其中涉及的各项关键技术和初步解决方案.针对典型航空发动机的工作状态,设计了阵列喷管型面,并对小信号增益和喷管内流场分布进行了数值计算.结果表明,利用航空发动机燃气可以获得较高的小信号增益,涡轮喷气CO2气动激光器存在其合理性和可行性.     

激光清洗技术的现状及展望

介绍了激光清洗技术的原理和方法,并展望了激光清洗技术在空间领域,海洋船舶甚至日常工作中的应用前景.     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

管中激光加速器的推力形成过程

管中激光加速器是一种新型的激光推力器,弹射体在管道中被加速。利用光线追踪法,根据光线在网格中的传播路径信息,运用辐射输运方程,得到流场的能量源项;数值求解含能量源项的流体控制方程,对管道中等离子体流场激波的形成和演化过程进行了研究。模型能够模拟空气光学击穿、空气对激光能量的吸收、等离子体对激光的屏蔽作用和推力形成过程,通过计算得到冲量耦合系数为3.61×10-4N/MW,等离子体内能转化为流场动能的比例约为9%。