不规则小行星附着可达区生成方法

针对不规则小行星表面附着任务需求,提出了一种基于动态邻域搜索的可达区生成方法。首先,建立了可达区数学模型,并采用质心距映射函数对非定点附着的终端位置约束进行了处理。在此基础上,将可达区的优化问题转化为附着基准点计算、边界起始点计算和边界点搜索三个子问题。针对附着基准点与边界起始点,分别通过最小燃耗轨迹优化与极限燃耗轨迹优化求解;针对边界点,设计了导向式动态邻域搜索方法,将复杂的非定点着陆优化问题简化为定点着陆燃耗优化与边界插值。最后,以小行星433 Eros为对象,对所提出的可达区生成方法进行了仿真。结果表明,该方法能够生成不规则小行星表面的可达区,具有较高的搜索求解效率,并适用于不同的初始位置和燃耗条件。     

The northern and southern mid-latitude ionospheric trough using global IGS vTEC maps

The aim of this work is the analysis of the mid-latitude ionospheric trough (MIT) using the Global Ionospheric Maps from IGS (GIMs) during the solar minimum, year 2008. This study was performed for different local times, 22, 00, 02 and 04 LT on the Northern and Southern hemisphere simultaneously. In the two hemispheres the MIT show asymmetric pattern. The high-latitude troughs are clearly distinguished in autumn and winter. Another feature is the longitudinal development towards the west of the geomagnetic pole covering a wider area in the Northern Hemisphere. Five empirical reference models were tested and compared with the MIT minimum position obtained from GIMs at different local times for both hemisphere. The results show a better agreement with the observations for the Northern Hemisphere specially with the Köehnlein & Raitt model. Fluctuations of 9 days and 27 days of the MIT minimum position are found, which could be related with the solar wind oscillations, especially for 00 and 02 LT in both hemisphere, suggesting a link between them.     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

总体结构优化在导弹总体设计中应用

作为导弹总体设计的一项重要内容，结构总体设计优劣影响着导弹最佳总体技术方案成败。现根据型号研制的工程经验，提出了应用于结构总体设计的总体结构优化方法。结合实例，着重从结构最优布局、动力学优化和运动学分析等三方面阐述了具有并行设计特点的总体结构优化内涵。研究表明，总体结构优化是基于并行工程框架的数字化定义、数字化预装配和分析、仿真一体化设计，是解决导弹结构轻质化、提高导弹总体设计水平的有效途径。     

求解广义特征值问题的并行保域行列式查找法

结构分析领域有着重要应用的广义特征值问题的并行算法，因为难度很大，且当问题的规模较大时还必须有先进的计算环境支持，所以迄今研究得很少。文中提出了一种适用于流水线型向量机的求解大型稀疏实对称矩阵广义特征值问题的并行保域行列式查找法。该方法不但保持了传统的行列式查找法的优点，而且克服了其迭代不收敛、漏根等缺点，并具有较高的速度加速比。该算法在ＹＨ－１计算机上进行了数值实验，结果表明该法是一种求解大型对     

点火位置对中心分级燃烧室点火过程影响的研究

燃烧室点火可靠性关系到发动机的整体性能,而点火位置对点火结果具有较大的影响。本文首先对点火位置位于回流区边缘中游的点火过程进行实验研究,同时采用数值模拟的方法对冷态流场和燃烧过程进行研究并与实验结果对比,从而验证数值模拟的准确性,最后采用数值模拟的方法研究了不同点火位置的火焰传播过程。结果表明,点火初始时刻,在流场的作用下,火核首先在燃油浓度较高的周向进行传播,同时在流场的作用下沿轴向向燃烧室下游传播,最终在回流区的作用下运动至燃烧室头部。当点火位置位于回流区中上游时,点火成功的关键是火焰传播到靠近头部燃油浓度较高的区域,而点火位置位于回流区下游时,其点火成功的关键是火焰传播到燃烧室中心位置并具有较高的能量。最佳点火位置位于回流区边缘的中游位置。     

基于信息管理与融合技术在目标类型识别上的研究

在系统模型的基础上结合实战提出影响目标飞机类型识别的证据,并按照影响程度进行优先权排序;结合数据库,提出证据概率计算的数学表达式;采用深度优先搜索的融合模式,按照D-S证据理论进行融合计算;在传感器管理模块的作用下,对融合结果进行反馈控制;结合实例,对系统进行仿真验证,证明其可靠有效。     

一种三维航迹快速搜索方法

本文提出了基于SAS的自动三维航迹规划方法。该方法通过把约束条件结合到搜索算法中去，有效地减小了搜索空间，缩短了搜索时间，从而使三维规划能够用于实时航迹规划。在搜索过程中地形信息得到了充分利用，使算法生成的航迹能够自动回避地形和威胁。实验证明，该方法能够快速有效地完成规划任务，获得满意的三维航迹。     

基于扩展卡尔曼滤波的GPS多径抑制技术

本文研究GPS系统中多径误差抑制技术。利用小范围多天线系统中多径对各天线之间伪距测量值影响的相关性，采用扩展卡尔曼滤波技术得到多径信号各参数，从接收信号中消去多径信号，以抑制多径信号影响。文章推导了多径信号对码环误差影响的闭合表达式，建立了采用当前统计模型的状态方程和观测方程。仿真表明该方法具备良好的抑制效果。     

用人工智能搜索策略进行抗疲劳优化设计

 将人工智能搜索策略应用于抗疲劳优化设计中,针对工程实际中大量存在的离散变量的优化问题,提出了一套不同于传统数学规划法的方法,从根本上解决了处理离散变量的困难。还以多钉多层板接头为算例,作了优化计算,说明本文提出的方法可行,计算程序适用。并且优化结果比数学规划法好。