飞机外形件三角网格模型光滑B样条曲面重建

综合考虑曲面重建时的拟合精度、曲面片拼接处的连续性和曲面的光顺性等因素,以三角网格模型的双三次B样条曲面重建为例,研究了飞机外形件三角网格模型的分片光滑B样条曲面重建方法。该方法首先采用最小二乘法逼近散乱数据,初步获得分片B样条曲面;然后将光顺准则加权到最小二乘函数中调节曲面光顺程度;最后运用罚函数法保证曲面片边界近似G1连续。将该方法应用于飞机外形件实测数据的曲面重建,误差分析结果验证了方法的有效性。     

考虑微加工误差的微机械陀螺的健壮性优化

 为减小微加工误差对音叉振动式微机械陀螺设计性能的影响、提高其批量性能稳定性,以对其加工后性能变异影响最大的若干关键参数为设计变量,在分析了几何约束条件、模态性能约束条件、基于模态的加工灵敏度约束条件的基础上建立了微机械陀螺健壮性优化的数学模型。在无需事先知道微机械陀螺尺寸／性能的详尽统计信息的条件下,采用一阶摄动技术和遗传算法实现了微机械陀螺的健壮性优化设计。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

基于行波与模态的混合方法对Timoshenko梁进行振动主动控制

 基于Timoshenko梁理论,采用波控制和独立模态空间混合方法,对悬臂梁的振动控制问题进行研究。采用波控制方法实现对Timoshenko梁结构的一点或多点的横向位移的振动控制。首先,基于结构的整体运动,采用模态坐标控制方法,对结构振动进行整体控制设计。而后,基于结构的局部性质,采用波方法吸收结构振动中的高频能量并求出Timoshenko梁中波的反射因数和透射因数。理论上研究了单位力扰动下的悬臂梁的振动。考虑的具体方法是将PD反馈波控制与基于极点配置法设计的模态控制相结合。最后给出数值结果。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

A Nonlinear Sub-grid Scale Model for Compressible Turbulent Flow

本文采用直接过滤的Navier-Stokes方程组作为可压缩湍流大涡模拟控制方程组。方程组中因过滤产生的高阶相关项用Taylor级数展开近似,但仅保留级数的一阶导数项。这样产生的误差相当于丢失了模型的部分耗散作用,本文用一种动力学非线性亚格子模型来补偿丢失的耗散影响。本文根据Caylay-Hamilton定理导出了一个非线性亚格子模型,模型中包含的系数由动力学模式确定。与传统的动力学Smagorinsky模式相比,这种动力学非线性模型(DNM)稳定性更好,且不需要在统计均匀方向进行统计平均来计算模型系数,因此减少了计算开销。本文用这种非线性亚格子模型对绕双椭球高超声速湍流进行了模拟,并将所得结果与实验值、计算值及理论值进行了对比。结果表明,本文模型可以有效地模拟可压缩湍流流场。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

流动参数对发动机冷却用引射器性能的影响

为了探索引射器在航空发动机空气系统中的应用可行性,采用标准k-ω模型并求解雷诺平均Navier-Stokes方程组的数值方法,分析了流动参数对发动机冷却用引射器引射系数、压力损失系数及引射性能综合参数的影响.结果表明:膨胀比由9增大至10.1,引射系数增大了 66％;膨胀比由15.2增大至20.2,引射系数降低了 19...     

考虑星历误差的天文测角/时间延迟量测组合导航方法

基于太阳震荡的时间延迟是一种新型天文导航量测量,可以提供探测器相对反射天体的距离信息,与星光角距量测量结合,可以提高导航性能。然而,星光角距量测模型与时间延迟量测模型均含有火卫一相对火星的位置矢量,火卫一的星历误差将影响导航精度。针对这一问题,提出了一种基于在线估计的天文测角/时间延迟量测组合导航方法,建立了包含火卫一位置及速度的状态模型,利用星光角距及时间延迟量测量同时对火卫一的位置和速度进行在线估计,仿真结果表明,提出的方法可以有效抑制火卫一星历误差对组合导航精度的影响,为探测器提供高精度的自主导航信息。